ESP32 -S2 Thermocouple Driver

Receive data from a compatible USB digital thermometer

Sistema di monitoraggio temperatura con Arduino che confronta tre tecnologie di sensori: NTC, DHT11 e Termocoppia. Acquisizione dati, analisi statistica e visualizzazione grafica.

Arduino library for the Analog Devices MAX31855 thermocouple-to-digital converter

Contains code used to record thermocouple and pressure transducer data for igniter testing.

Arduino library for the MAX31856 thermocouple-to-digital converter

Arduino Code for the usage of a thermocouple to deduce information about a thermodynamic system of interest

Connecting MAX6675 Module with RP2350 RPi PICO2 board

Arduino library for Analog Devices AD849x thermocouple amplifier modules with filtering and calibration support.

Firmware for a Type-K thermocouple controller

P8X32A/Propeller, P2X8C4M64P/Propeller2 driver object for the Maxim max31856 thermocouple amplifier

Arduino library for the MAX31855 thermocouple converter. Supports temperature reading, cold junction compensation, and fault detection.

Galactic Aztec Raspberry Pi Add-on: Igniter

24-bit analog to digital converter with I2C interface

This repository documents the hardware and software of the ARIS pitot tube.

Designed to monitor the voltage of a thermocouple in a furnace and send an alert via sms using twillio.

These are few of the tests and programs I implemented on Arduino UNO during my internship at Zoidlabs in May 2023

Sends MCP9600 thermocouple readings to Artisan via WebSocket.

Schematic and PCB design of a three-channel thermocouple input module (K-type).