A Flight Controller board for a quadcopter based on YMFC Joop Brokking's code.

A DIY drone - built from scratch

This Is A Six Degree Of Freedom Manipulator Controlling Program Which Wrote In Arduino IDE And ArduinoLabsForMicroPython With C/C++ And Python<MicroPython> Programming Languages That Works On A Raspberry Pi Pico With RP2040 Main Processor Or A Raspberry Pi Pico2 With RP2350 Processor

Projects files for the ECG monitor prototype device built for Analog Project in EN2091 module. Contains PCB files, Solidworks design files and simulations.

In this repo, I will be focusing on coding the Atmega328P microcontroller that is found on the Arduino Uno dev board. I will be coding it on the Arduino IDE and Visual Studio.

~ USART Interaction with Atmega16 and Qt Application

A PCB that can help you reflow and solder your SMD components.

Loadboard IoT device for weight measurement with I2C and UART capabilities. Used for Load-cell measurement

USB to CAN converter dongle

RoboCup Junior phoenix Team

RoboCup Junior PersianGulf Team

This is Simple Electronic project that I am done in University.

A hearth shaped PCB with LEDs, showing a few, predefined patterns of colors.

🏔️ Altitude measurement device with BLE & USB Serial — ESP32/NRF52840 firmware + custom PCB in Altium Designer

Have you ever wanted to lock your closet? But you don't want to use the keys in 21st century! Here is the project for you.

This IoT-integrated smart extension cord is developed for the semester 2 project under EN1190: Engineering Design Project.

This repository was created for the purchase fo the technical test of Sillion Technologies.

POV_Arduino (code, altium designer project)

This 3D plotting device is developed for the semester 4 project under EN 2160: Electronic Design Realization.

University project.