Using Binary Code Modulation (BCM) on a ATTiny13 microcontroller to drive LEDs and fade colours smoothly.
-
Updated
Feb 16, 2021 - C
#
bcm
Here are 11 public repositories matching this topic...
Embedded SW Booting - Boot Manager, BootLoader, BootLoader Updater, Application
-
Updated
Feb 2, 2024 - C
针对大学方程式赛车开发的车规级后车身域控制器项目，主控采用车规级微控制器S32K344，嵌入式软件基于符合AUTOSAR规范的MBDT开发，集成车身控制、低压电池监测、智能配电与TBOX多项功能。该项目包括后车身域控制器软硬件及配套QT数传上位机。
-
Updated
Oct 29, 2025 - C
It's just ridiculous the price for an IP KVM solution. I simply can't get accept that! So, this is a poor man IP KVM that works pretty well, and allows one to go into a remote Bios machine, setup, boot, install OS... everything!! for around 10$ bucks!!
-
Updated
Aug 30, 2023 - C
This project shows a LED matrix panel with 64x64 full RGB pixels driven by a RP2040 Rasberry Pi micro chip. It runs at 50Hz frame rate in BCM mode to get an absolute flicker free display. This is only a tiny demo program running several tasks using FreeRTOS. The driver uses 2 state machines of one PIO device. Each state machine is feeded by a DM…
-
Updated
Feb 5, 2022 - C
Improve this page
Add a description, image, and links to the bcm topic page so that developers can more easily learn about it.
Add this topic to your repo
To associate your repository with the bcm topic, visit your repo's landing page and select "manage topics."