DIY CO2 meter for home and office use v.2

A weather station that can show local atmospheric pressure, temperature humidity, and UV index without any internet connection.

An Arduino library for Bosch sensors (BMP085, BMP180, BMP280, BME280) It uses I2C address only with autodetect of address.

ESP8266 test with bmp180 hum and presure sensor

Arduino based Home Weather Station.

BIXS Arduino Software from Avionics Team, STL

Waveshare 10DOF IMU sensor library with BMP180

Industrial Automation IoT Assignment. Naufal, Syafiqah, Harith & Maple

Weather station software for Arduino platform.

A barometer sensor based on the BMP180 that communicates over secure MQTT.

ESP32-C3 SuperMini air-quality monitor with SCD41 (CO₂), BMP180 (pressure/temp) and LCD display. Includes firmware, wiring, and a 3D-printed enclosure (F3D/STL)

Quick hack for temp sensors around the home

Contains sensor module examples with Arduino. These examples include BMP180-PressureMeasurement, HCSR04-DistanceMeasurement and Keypad-Example.

Arduino Automatic Weather Station with RF communication and Internet Connectivity

BMP180 senses the altitude and sends it to arduino. Also the movement of 2 servos connected to the arduino are controlled using keyboards.

C++ driver library for the BMP180 digital pressure sensor

🌱 Enhance farming efficiency with an automated IoT system for real-time monitoring, irrigation, and environmental sensing.

An arduino library for the BMP sensor, it is applicable for BMP180. the library introduces a lot of features to minimize the reading errors and facilitate using several modules together to use the library--> copy the BMP file to arduino--> libraries

This repository has the code that was developed for our CanSat for sensor fusion, control algorithms as well as communication with ground station.