BMP180 full-featured driver library for general-purpose MCU and Linux.

This project reads temperature, pressure, and altitude from a BMP180 sensor using an ESP32, and sends the data to InfluxDB via Wi-Fi. The data is then visualized in Grafana in real time.

Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

8x8 Matrix LED Uhr mit DCF77 Funkempfänger

Simple meteo station on AVR

This project is based on ESP32. Purpose of this project was to create application that would help with managing plant monitoring at home. It consist of soil moisture sensors, bmp180 and water pump. This elements help with keeping plant alive! Additionally http server is created to help keep track of data and gives possibility to run water pump.

ESP32 Arduino Color E Paper Weather Station project

Data acquisition device for digital thermometers ds18b20 and modbus-tcp server

Main repository to develop and test drivers for various micro controllers and devices. The aim is to make each generic enough to be used in any C based project.

I wrote a driver for the BMP180 using the HAL library for the STM32F446RE card. Thanks to this driver, temperature, pressure and altitude data can be obtained from the BMP 180 module.

A set of projects and libraries for a Microchip PIC 16F18346 Micro-controller. 20 pin, 8 bit , XC8.

Environmental Sensing Module for ESP32

This is a project with the ESP32 chip onboard the ESP32-devkitc and a temperature and pressure sensor BMP180. It uses the ESP-IDF framework.

Keep calm and debug.

BMP180 driver for STM32.

BMP085 Library for STM32Cube

This project for STM32F401CC development board.

Thermometer demo using LVGL and FreeRTOS running on Pi Pico

BMP085 library for pico-sdk