Universal wireless communication library for embedded devices

A controller for Somfy RTS shades and blinds

RF tool based on CC1101 module and Arduino Pro Micro 8VMHz/3.3V. Allows using CLI with human readable commands to control CC1101 board over USB interface. Putty or any other serial terminal can be used. It has similar functionality to YardStick One but is cheaper and doesn't need specialized software. Allows for RF jamming and simple replay attack

driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi

RFQuack: the versatile RF-analysis tool that quacks!

Arduino library for interfacing with CC1101 transceivers.

A cybersecurity tool for RF scanning, copying, and replaying signals

Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121

Example of using CC1101 module with Arduino Pro Micro ( ATMEGA32U4 ) for radio jamming

Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32

System to capture digital signaldata and transfer them to another system

Driving one of those cheap RF1101SE boards with a Arduino or Teensy

Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.

Universal Radio Hacker (urh) plugin to decode cc1101 messages, which uses the cc1101 FEC (forward error correction) feature

A remote control clone of an RC-switch using Arduino Nano and a TI CC1101 module

Arduino library for CC1101 transceiver.

Enable CC1101 as a RF remote receiver/transmitter in ESPHome (using Radiolib)

Analyze frequencies using CC1101

This is the version 2 of my previous CC1101 driver library for MSP430 (https://github.com/abhra0897/MSP430-CC1101-Energia-Library). This time it is much better, with lots of new features, supporting all the frequencies, and works perfectly. Read the readme.md for detailed information.

This is simple half duplex radio communication device built with CC1101 module and Arduino Pro Micro (3.3V / 8MHz) using SmartRC library