Converts from PC formatted MAC addresses (hardware addresses) to Cisco format or vice-versa

Ansible PlayBooks for Cisco IOS

Cisco Packet tracer based using Vlan and Trunk where there is 3 switches and 1 router with dhcp server.

Red OSPF Multi-Área con seguridad robusta. Incluye segmentación de red, control de acceso VTY por vecino directo y políticas de denegación de tráfico mediante ACLs estándar y extendidas.

Cisco CUBE ve ISR Router platformları için geliştirilmiş Python tabanlı ağ otomasyonu. Kurumsal bir altyapıda, ses ağlarının (Voice Networks) yönetimini, dial-peer konfigürasyonlarını ve trafik izleme süreçlerini Netmiko ile dijitalleştirerek operasyonel verimliliği artırmayı hedefler.

Another way to monitor a flapping BGP touter an send alerts

code used to set up network security lab on GNS3

Este repositório contém alguns scripts (organizados em pastas) referentes aos comandos trabalhados no 1 ° semestre do Curso Técnico de Redes de Computadores - SENAI de informática.

Configure VLANs and OSPF with Ansible

using netmiko it runs show IP DHCP binding and then outputs that to a DHCP.html file that then is opened but the Python Web Server using tornado

This program reads in the configuration file from a Cisco Catalyst router or switch running IOS-XE extracts the unique information and inserts it into a new configuration along with configurations rendered from site specific Jinja templates.

Cisco IOS shell script to test BER of a module in an optical port.

System and Network

✅ Automated Cisco device configuration | 💾 Pre-change backups | ⚡ Multi-device deployment | 📁 YAML-driven | Powered by Netmiko

This code configures the underlay network fabric for a Layer 3 spine and leaf topology. Its reusable simply editing the YAML config. The configuration can be manipulated to reflect your environment. Netmiko & Pyml modules are used.

Hands-on Cisco Packet Tracer projects demonstrating VLANs, routing and enterprise networking concepts.

View RESTCONF configuration for Cisco devices

Example API to be used with Cisco IOS Shell to work with Automation

script to generate Cisco IOS commands to setup subnets, DHCP, and RIP... instead of actually learning