Serial tool is a utility for developing, debugging and validating serial communication with PC.

Pretend your PC a Raspberry Pi or an ESP32 to connect I2C / SPI / GPIO / UART peripherals.

Minimal pythonic wrapper to Intra2net's libftdi driver for FTDI's USB devices

Simple DMX driver using an RS485 adapter

Python OpenDMX stage light control

PyFtdi with Windows FTDI driver support

ISP Programmer for NXP Cortex-M Chips

A python wrapper for libft4222 library

A Python wrapper for FTDI's D3XX library.

Terminal for communication with FT IC in FIFO mode, tested with FT232H

PyFT260: A Python driver and interface library for FTDI's FT260 I2C, UART, and GPIO functions

Python wrapper around the FTDI driver library d2xx to use it with python.

FTDI FT232H MPSSE EEPROM Read / Write in Windows Python

Provides high level API to robot arm controlled by SSC-32U

Simple FTDI chip EEPROM backup and restore utility

With this script you can integrate DMX fixtures with the Philips Hue bridge and Hue mobile app.

A Python library for the Atlas Scientific (not-affiliated) probes.

Small, flashrom-like, easy to use python library to communicate with some SPI MRAM chips over FTDI programmers. This library was created during my bachelors thesis project about electromagnetic fault injections on MRAM chips.

Python OpenDMX Adapter for stage light control

Simple REST API for controlling a local USB Denkovi Relay Board