A simulation of a complete digital communication system with different modulation schemes in MATLAB for transmitting and receiving text messages.
-
Updated
Jan 11, 2022 - MATLAB
A simulation of a complete digital communication system with different modulation schemes in MATLAB for transmitting and receiving text messages.
This repo contains simulation code for DI-S-MMSE Turbo Equalizer and LMMSE Equalizer applied to OTFS Modulation.
📻 Using Software Designed Radio to transmit & receive FM signal
Great repository to learn PMSM control and modelling. It provides the basic tools to generate control calibrations based on the motor parameters, to tune the PID controllers within the controller, and to simulate both the controller and the plant.
Allows to reproduce all figures from "Pruned DFT Spread FBMC: Low PAPR, Low Latency, High Spectral Efficiency", IEEE Transactions on Communications, 2018
The implementation of 5G NR Modulation and Demodulation
This is the Matlab code for the paper "Denoising Higher-Order Moments for Blind Digital Modulation Identification in Multiple-Antenna Systems" published in the IEEE Wireless Communications Letters.
MATLAB Imitation Modeling for the BER of the HF Communication System using M-PSK Modulation in the HF Communication Channel with Multipath and Signal Fading that constructed according to ITU-R Recommendation F.1487
ASK, QAM, PSK, FSK, MSK simulations and analysis.
Designed a digital communication system using QAM modulation on Octave with Symbol Timing and Carrier Frequency Recovery
Wasla is a project to modulate and perform synchronous demodulation for speech signals
MATLAB-based wireless communications simulator for transmitting data over a high-mobility doubly-selective fading channel for various modulation techniques (OFDM, OTFS, ODDM)
Multipath propagation, Channel estimation with least square method.
Yildiz Navigation is an R&D project focusing on GPS Jamming Status.
My solutions for the practical work of the Digital Communication (CN : Communication Numérique) module in my 4th year of state engineering studies at ENSTTIC
Project aims to simulate multiplexing three signals on two carriers with two different frequencies where two of these signals are modulated using quadrature amplitude modulation, then the three signals are restored using synchronous carrier demodulation.
Double side band supressed carrier modulation and coherent detector demodulation
该项目为2024年ADI通达杯作品,采用深度学习识别信号调制方式,并实现位同步及频偏和相偏补偿。
Add a description, image, and links to the modulation topic page so that developers can more easily learn about it.
To associate your repository with the modulation topic, visit your repo's landing page and select "manage topics."