C++ library for the LPC2378-STK board from Olimex

Pac-Man-like game for the LPC2378-STK board from Olimex written in C++

Keil uVision 5 demo project for Olimex E407 STM32F4 board. It uses STM32 HAL library and FreeRTOS. The project was generated using STM32CubeMX. The demo just enables/disables the user LED from the board.

A ZigBee sniffer based on STM32F4Discovery board and OLIMEX MOD-MRF24J40 radio module

Collecting data from different sensors

An alternative to Elec Guru written in python using PyQt 5 UI Framework

Carry tons of information using CouchDB and Olimex Lime2

Go·Hardware·Lean

This example program, missing from the Olimex repository, provides a simple example using ESP-IDF 4.1 and better, of initializing the ethernet subsystem. There are many breaking changes in ESP-IDF 4.1, so a working example is very important.

Some Informations about LoRa

Hardware and software for an opencpn-based chartplotter

Experiments with embedded linux using buildroot

Portable CO2 monitor based on ATTiny85 and MH-Z19B sensor

Olimex documentation https://www.olimex.com/

program for olimex esp32 poe iso: reads temp from ds18b20 and sends to zabbix

Fork of u-boot with patches for Olimex AM3352-SOM

Olimex A10 Image for home automation

Measure an electrocardiogram (ECG) with an Arduino Uno and an Olimex-EKG-EMG-Shield and calculate the heart rate variability afterward.

Demonstrates using a ‘Processing’ app (v4.x) with Swing components to display an electrocardiogram generated by an Arduino UNO with an Olimex EKG/EMG Shield.

A quick-start guide to setting up the PCEmulator example for the Olimex ESP32-SBC-FabGL