STM32H7 ADC Multi Channel Multi Conversion TriggerTimer with Oversample and data transmit with DMA, In HAL/LL library

Oversampling operations on security/non-security patches. This method is described in the paper "PatchDB: A Large-Scale Security Patch Dataset", which appears in 2021 51st Annual IEEE/IFIP International Conference on Dependable Systems and Networks (DSN 2021), Taipei, June 21-24, 2021, pp. 149-160.

This example shows how to configure the Analog-to-Digital Converter (ADC) to trigger a conversion on a specific event. The Timer/Counter type A (TCA) overflow is used to trigger the ADC sample accumulation and ADC result is transmitted through USART.

Control LED array using a force sensitive resistor on an AVR64DD32.

This repository contains a MPLAB® X project, a LCR meter implementation using the internal resources of PIC18F56Q71 microcontroller.

In the example application, the ADC result will be sent to an android/iOS app over Bluetooth communication using the RN4870 Click board. The ADC result will also be sent to a serial terminal and a 4x4 RGB Click board is used to illuminate different LEDs corresponding to the applied force on the force sensor on the Force Click board