• Adds a live view of the device's screen to the Windows version of CDU Hub.

• Added support for in-process plugins (defaults to off, controlled by new setting in CDU Hub INIT page).

• METAR page now toggles between METAR, TAF and both.
• Add About page to hub.
• Add option to auto-start on login (defaults to off) to Windows About form.

• Added support for the PFP-7.
• Added provisional support for the PFP-3N.
• Switching between CDUs and back to the hub is now done with BRT and DIM rather than BLANK1 and BLANK2.

• Preliminary support for the PFP-7 CDU.

Things to do before release of 1.4:

• Font upload.
• Colour palettes.
• Change BLANK1 and BLANK2 references in hub to BRT and DIM.

Things to be done after release of 1.4:

• Key mapping for Airbus simulators.
• Support for Boeing simulators (the few I have).
• Support for running the hub across multiple CDUs simultaneously.

• Added support for auto-brightness using ambient light sensors.
• Added INIT pages to configure font, display offset and brightness (fixed & auto).
• Removed support for BRT / DIM buttons controlling brightness.

The BRT/DIM button support was removed in preparation for PFP panel support. Those panels don't have blank buttons that can be used to interrupt the flight simulator or switch between simulated CDUs and I think the least terrible option for them would be to use BRT and DIM as interrupts.

Currently the MCDU still uses BLANK1 and BLANK2 to interrupt flight sims but the intention is to standardise on BRT and DIM.

• Added weather index page.
• Added METAR page.

• Added support for colour palletes.

Each simulator can have a separate palette set up for it, as per fonts, and custom palettes can be declared in the custom-palettes.json configuration file (editor to follow).

• Added the EGA font using BIOS dumps from https://int10h.org/oldschool-pc-fonts/

First release.

• Added preliminary support for custom fonts