Showing posts with label beads. Show all posts
Showing posts with label beads. Show all posts

11/18/14

Jak zrobić małą zawieszkę

Podzielę się z Wami Kochani przepisem :)
Zaznaczam, ze to mój pierwszy tutorial w życiu.

My dear readers, I will share one recipe with you today.



1.Wybieramy najpierw stemple i na ich wymiar rysujemy kółeczka z na tekturze, które potem wycinamy ..
 Brzegi możemy przetrzeć papierem ściernym.
First choose the stamps and on their sizes draw the circles on cardboard, then cut them. You can rub the edges with the sandpaper.



2. Wybrane stempelki odbijamy na papierze po dwa razy, po jednym na każdą stronę wyciętego z koła.
Selected stamps imprint on the paper, each stamp twice, for each side of the circles cut out of the cardboard.



3. Postemplowane motywy obrysowujemy cyrklem i wycinamy. Tak ok 2mm mniej niż tekturowe kółeczka.
Imprinted motifs outline with the calipers and cut them out. About 2 mm smaller then the cardboard circles.



4. Wycięte motywy przyklejamy z dwóch stron zrób tekturek.
The cut motifs stick with the glue on both sides of the cardboards.
    



5. Tuszujemy brzegi.
     Use the ink to paint the edges.



6. Teraz kolej na dziurkowanie i nitowanie.
Now it's time for punching and riveting.



7. Z jednej strony przyklejamy badziki.
   On the one side stick badges.


8. Doczepiamy koraliki za pomocą kolorowych drucików.
   Attach beads with the colorful wires.



9. Następnie przyczepiamy sznureczki.
   Next attach the little strings.


10. Możemy dodatkowo umieścić jakies sentencje na tylnej stronie zawieszek.
 Ja wykorzystałam wycinki z gazet.
 You can also put a sentence (maxim) on the back side of the hangers. I've used clippings from newspapers.



Oto i efekt!
  And here is the effect!











Wykorzystałam stemple:
I've used stamps
oraz badziki
and badges





Miłego tworzenia!
Have a nice creation!
Jyoti

11/21/13

Beams set present tag Vol. 2

For this tag I also used the "beams set" stamps in combination with the "Cupola" stamp. I first inked the backround with blue and green Disterss Ink, then stamped the images and added some chipboard. The "Stars and hearts" chipboard I first inked with red ink, then stamped with the "creased background" stamp over it and glued them down onto the card. After that I added some tiny beads into the middle of the card and added some Glossy Accents over them. This way the beads will stay put. For the banner I just red ink and the word "Happy" from the "Words" stamp set.
W tym tagu znajdziecie zarówno "beams set" jak i "cupolę". Na początku tuszowałam tło taga Distressami, następnie stemplowałam, dodałam tekturki z gwiazdkami, które stemplowałam "creased background" wypełniłam koralikami i glossy accent.
Na chorągiewce znajdziecie napis "Happy" ze stemplowego zestawu słówek.


Happy stamping, Wesołego stemplowania!
xoxo, Sanna 

Wykorzystane produkty: Used products:
 TEC-019 TES-140 cupola  beams set TES-115 - rays - radial background TES-157 words Friend Happy Travel Remember Journey - smash / project life  creased background