DSEI30-06A
Fast Recovery IFAV = 37 A
VRRM = 600 V
Epitaxial Diode (FRED) trr = 35 ns
VRSM VRRM Type TO-247 AD
A C
V V
640 600 DSEI 30-06A C
A C
A = Anode, C = Cathode
Symbol Conditions Maximum Ratings Features
IFRMS TVJ = TVJM 70 A • International standard package
IFAVM TC = 85°C; rectangular, d = 0.5 37 A JEDEC TO-247 AD
• Planar passivated chips
IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine 300 A • Very short recovery time
t = 8.3 ms (60 Hz), sine 320 A • Extremely low switching losses
TVJ = 150°C; t = 10 ms (50 Hz), sine 260 A • Low IRM-values
t = 8.3 ms (60 Hz), sine 280 A • Soft recovery behaviour
• Epoxy meets UL 94V-0
I2t TVJ = 45°C; t = 10 ms (50 Hz), sine 450 A2s
t = 8.3 ms (60 Hz), sine 420 A2s
Applications
TVJ = 150°C; t = 10 ms (50 Hz), sine 340 A2s
• Antiparallel diode for high frequency
t = 8.3 ms (60 Hz), sine 320 A2s
switching devices
TVJ -40...+150 °C • Anti saturation diode
TVJM 150 °C • Snubber diode
Tstg -40...+150 °C • Free wheeling diode in converters
Ptot TC = 25°C 125 W and motor control circuits
• Rectifiers in switch mode power
Md mounting torque 0.8...1.2 Nm supplies (SMPS)
Weight typical 6 g • Inductive heating and melting
• Uninterruptible power supplies (UPS)
• Ultrasonic cleaners and welders
Symbol Conditions Characteristic Values
typ. max. Advantages
• High reliability circuit operation
IR VR = VRRM TVJ = 25°C 100 µA
• Low voltage peaks for reduced
VR = 0.8·VRRM TVJ = 25°C 50 µA
protection circuits
VR = 0.8·VRRM TVJ = 125°C 7 mA
• Low noise switching
VF IF = 37 A TVJ = 150°C 1.4 V • Low losses
TVJ = 25°C 1.6 V • Operating at lower temperature or
VT0 For power-loss calculations only 1.01 V space saving by reduced cooling
rT TVJ = TVJM 7.1 mW
RthJC 1 K/W
RthCH 0.25 K/W
trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 35 50 ns
IRM VR = 350 V; IF = 30 A; -diF/dt = 240 A/µs 10 11 A
L < 0.05 µH; TVJ = 100°C
IFAVM rating includes reverse blocking losses at TVJM. VR = 0.8·VRRM, duty cycle d = 0.5
Data according to IEC 60747
IXYS reserves the right to change limits, test conditions and dimensions. 20150909a
© 2015 IXYS All rights reserved 1-3
DSEI30-06A
Dimensions TO-247 AD
A D2
E A2 ØP Ø P1
Sym. Inches Millimeter
min. max. min. max.
Q S A 0.185 0.209 4.70 5.30
A1 0.087 0.102 2.21 2.59
A2 0.059 0.098 1.50 2.49
D1 D 0.819 0.845 20.79 21.45
D E 0.610 0.640 15.48 16.24
2x E2 E2 0.170 0.216 4.31 5.48
4 e 0.430 BSC 10.92 BSC
L 0.780 0.800 19.80 20.30
L1 - 0.177 - 4.49
1 2 3
ØP 0.140 0.144 3.55 3.65
Q 0.212 0.244 5.38 6.19
L1 E1 S 0.242 BSC 6.14 BSC
b 0.039 0.055 0.99 1.40
b2 0.065 0.094 1.65 2.39
L
b4 0.102 0.135 2.59 3.43
c 0.015 0.035 0.38 0.89
D1 0.515 - 13.07 -
2x b2 D2 0.020 0.053 0.51 1.35
2x b C E1 0.530 - 13.45 -
A1 Ø P1 - 0.29 - 7.39
e
IXYS reserves the right to change limits, test conditions and dimensions. 20150909a
© 2015 IXYS All rights reserved 2-3
DSEI30-06A
Fig. 1 Forward current versus Fig. 2 Recovery charge Fig. 3 Peak reverse current
voltage drop versus -diF /dt versus -diF /dt
Fig. 4 Dynamic parameters vs. Fig. 5 Recovery time Fig. 6 Peak forward voltage
junction temperature versus -diF /dt versus -diF /dt
Fig. 7 Transient thermal impedance junction to case
IXYS reserves the right to change limits, test conditions and dimensions. 20150909a
© 2015 IXYS All rights reserved 3-3
