Scribd
Upload
154 views2 pages

Injector Specification: Nozzle Holder Assembly No. 34107

This document provides specifications for a nozzle holder assembly, including: 1. The assembly consists of 8 main parts to adjust pressure and hold the nozzle. 2. It lists applications for two injectors and their corresponding nozzle parts and hole specifications. 3. It provides the new and service opening pressure ranges and maximum valve lift for the two injectors.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
154 views2 pages

Injector Specification: Nozzle Holder Assembly No. 34107

This document provides specifications for a nozzle holder assembly, including: 1. The assembly consists of 8 main parts to adjust pressure and hold the nozzle. 2. It lists applications for two injectors and their corresponding nozzle parts and hole specifications. 3. It provides the new and service opening pressure ranges and maximum valve lift for the two injectors.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PAGE 1

INJECTOR SPECIFICATION

EDITION: 4 NOZZLE HOLDER


APPLICATIONS: SEE PAGE 2 ASSEMBLY NO. 34107
DATED: 02-12-99 SUPERSEDES:
CUSTOMER: AABENRAA CUSTOMER PART NO. SEE PAGE 2

TEST STAND: ISO 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID...SAE J967 / ISO 4113 Service Manual 99118 for additional
(Ref. S.B. 201). AT ROOM TEMPERATURE (70°-80° F) service information.
2. CALIBRATING HIGH PRESSURE PIPES... 0.063 X 12"
(1.6 X 305 mm)

ITEM PART
NO. NO. QTY. DESCRIPTION

1 34107 1 BODY ASSY, * (1 PREFERRED 2 MAX.)


nozzle holder PART THICKNESS
NO. mm (inches)

781229 1.000 (.0397)


2 SEE * SHIM, pressure 781230 1.050 (.0413)
TABLE adjusting 781231 1.100 (.0433)
781232 1.150 (.0453)
781233 1.200 (.0472)
781234 1.250 (.0492)
3 34164 1 SPRING, pressure 781235 1.300 (.0512)
adjusting 781236 1.350 (.0531)
781237 1.400 (.0551)
781238 1.450 (.0571)
781239 1.500 (.0591)
4 33578 * SEAT, spring 781240 1.550 (.0610)
781241 1.600 (.0630)
781242 1.650 (.0650)
781243 1.700 (.0669)
781244 1.800 (.0709)
5 29418 1 PLATE ASSEMBLY, 781246 1.850 (.0728)
adapter 781247 1.900 (.0748)

6 PAGE 2 1 NOZZLE ASSEMBLY, hole type


(not included in nozzle holder assembly)

7 34109 1 NUT, nozzle retaining


(torque to 50-60 N⋅m / 37-44 lbf⋅ft)

8 --- 1 WASHER , sealing (purchased separately)

FOR ENGINEERING USE ONLY

DATE ECN NO. EDITION


02-17-98 25153 1
11-18-98 25153 2
11-20-98 25153 3
02-12-99 26134 4
PAGE 2

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 34107

INJECTOR NOZZLE

STANADYNE CUSTOMER INSCRIPTION STANADYNE CUSTOMER INSCRIPTION APPLICATION


PART NO. PART NO. CODE PART NO. PART NO. CODE

34106 610 B 9120 PER 70157 34110 - PER 70157 DV 29 / 48


SDLLA 150P 34
34494 610 B 9250 PER 70157 34495 610 B 9152 PER 70157 DV 29 / 48
SDLLA 150P 50

OPENING PRESSURE
NEW AND SERVICE
INJECTOR MAX VALVE LIFT NO. OF HOLES
NO. MPa (PSI) mm (inches) @ DIA. mm (inches)

34106 18.0 - 18.8 (2610 - 2726) 0.275 (.0108) 4 @ 0.245 (.00964)


34494 23.0 - 23.8 (3335 - 3451) 0.325 (.0127) 4 @ 0.272 (.0107)

For bar, multiply MPa by 10


Maximum valve lift for service: + 0.05mm beyond value shown in table.

You might also like