PAGE 1
INJECTOR SPECIFICATION
EDITION: 3 NOZZLE HOLDER ASSEMBLY
APPLICATIONS: SEE PAGE 2 NO. 31581 (35092)
DATED: 11-10-00 (OEM) (SERVICE)
CUSTOMER: VOLKSWAGEN SUPERSEDES:
CUSTOMER PART NO. SEE PAGE 2
TEST STAND: ISO 8984 NOTE: Reference Conventional Injector
1. CALIBRATION FLUID...SAE J967 / ISO 4113 Service Manual 99118 for additional
(Ref. S.B. 201). AT ROOM TEMPERATURE (70°-80° F) service information.
2. CALIBRATING HIGH PRESSURE PIPES... 0.063 X 12"
(1.6 X 305 mm)
ITEM PART
NO. NO. QTY. DESCRIPTION
* (1 PREFERRED 2 MAX.)
1 29230 1 BODY, nozzle holder
(35089) PART THICKNESS
NO. mm (inches)
2 SEE * SHIM, pressure 24037 1.000 (.0394)
TABLE adjusting 24038 1.050 (.0413)
(PAGE 2) 24039 1.100 (.0433)
24040 1.150 (.0453)
24041 1.200 (.0472)
3 31582 1 SPRING, pressure 24042 1.250 (.0492)
adjusting 24043 1.300 (.0512)
24044 1.350 (.0531)
24045 1.400 (.0551)
24046 1.450 (.0571)
4 29233 1 SEAT, spring 24047 1.500 (.0591)
24048 1.550 (.0610)
24049 1.600 (.0630)
5 29234 1 PLATE ASSEMBLY, 24050 1.650 (.0650)
24051 1.700 (.0669)
adapter 24052 1.750 (.0689)
24053 1.800 (.0709)
24054 1.850 (.0728)
24055 1.900 (.0748)
24056 1.950 (.0768)
24057 2.000 (.0787)
24058 2.050 (.0807)
24059 2.100 (.0827)
6 PAGE 2 1 NOZZLE ASSEMBLY, pintle
(not included in nozzle holder assembly)
7 29235 1 NUT, nozzle retaining
(torque to 70-90 N⋅m / 51.5-66.5 lbf⋅ft)
FOR ENGINEERING USE ONLY
DATE ECN NO. EDITION
05-29-95 23164 1
08-23-00 26983 2
11-10-00 26983 3
PAGE 2
APPLICATION AND SERVICE INFORMATION
FOR HOLDER ASSEMBLY 31581 (35092)
(OEM) (SERVICE)
INJECTOR NOZZLE
STANADYNE CUSTOMER COLOR STANADYNE CUSTOMER INSCRIPTION APPLICATION
PART NO. PART NO. CODE PART NO. PART NO. CODE
TALKING CODE SHANK
31580 028 130 201P BLACK 29224 068 130 211K 29224 2.4 L - 5 Zy - T4
(35091) (RAL 9005) DN0SD294
OEM P/N
(SERVICE P/N) For Service, Nozzle Assembly P/N is the same of OEM P/N .
OPENING PRESSURE
NEW AND SERVICE
INJECTOR MAX VALVE LIFT
NO. MPa (PSI) mm (inches)
31580 13.0 - 13.8 (1885 - 2001) 0.775 (.0305)
(35091)
For Bar multiply MPa by 10
Maximum valve lift for service: +0.05mm beyond value shown in table
