Scribd
Upload
377 views2 pages

Injector Specification: Nozzle Holder Assembly No. 38465

This document provides specifications for a nozzle holder assembly, including: 1. The assembly number, date, customer information, and test stand protocol. 2. A list of parts that make up the assembly, their part numbers, quantities, and descriptions. 3. Application and service information including injector and nozzle part numbers and codes, opening pressure specifications, maximum valve lift, and number/diameter of holes for the specified injector.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
377 views2 pages

Injector Specification: Nozzle Holder Assembly No. 38465

This document provides specifications for a nozzle holder assembly, including: 1. The assembly number, date, customer information, and test stand protocol. 2. A list of parts that make up the assembly, their part numbers, quantities, and descriptions. 3. Application and service information including injector and nozzle part numbers and codes, opening pressure specifications, maximum valve lift, and number/diameter of holes for the specified injector.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

INJECTOR SPECIFICATION

EDITION: 1 NOZZLE HOLDER


APPLICATIONS : SEE PAGE 2 ASSEMBLY NO. 38465
DATED: 02-23-2006 SUPERSEDES:
CUSTOMER: DEUTZ CUSTOMER PART NO. SEE PAGE 2

TEST STAND: ISO 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID: SAE J967 / ISO 4113 Service Manual 99118 for additional
(Ref. S.B. 201) AT ROOM TEMPERATURE (70Ε-80Ε F) service information.
2. CALIBRATING HIGH PRESSURE PIPES: 0.063 X 12"
(1.6 X 305 mm)

ITEM PART NO. QTY. DESCRIPTION


NO.
*(1 PREFERRED
1 38467 1 BODY ASSEMBLY, 2 MAX.)
nozzle holder PART THICKNESS
NO. mm (inches)
2 SEE * SHIM, pressure 29305 1.000 (.0393)
1 29306 1.050 (.0413)
TABLE adjusting
29307 1.100 (.0433)
29308 1.150 (.0453)
3 781720 1 SPRING, pressure 29309 1.200 (.0472)
adjusting 29310 1.250 (.0492)
29311 1.300 (.0512)
4 29333 1 SEAT, spring 29312 1.350 (.0531)
29313 1.400 (.0551)
29314 1.450 (.0571)
29315 1.500 (.0591)
2 29316 1.550 (.0610)
5 32972 1 PLATE ASSEMBLY, 29317 1.600 (.0630)
adapter 29318 1.650 (.0650)
29319 1.700 (.0669)
29320 1.750 (.0688)
3 29321 1.800 (.0708)
29322 1.850 (.0728)
29323 1.900 (.0748)
29324 1.950 (.0767)
4 6 PAGE 2 1 NOZZLE ASSEMBLY, 29325 2.000 (.0787)
hole type
(not included in nozzle holder assembly)
5

7 38473 1 NUT, nozzle retaining


(torque to 34 – 40 Nm or 25 - 30 lbf.ft)

6
FOR ENGINEERING USE ONLY
DATE ECN NO. EDITION
02-23-06 29927 1

7
Page 2 of 2

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 38465

INJECTOR NOZZLE
STANADYNE CUSTOMER INSCRIPTION STANADYNE CUSTOMER INSCRIPTION
PART NO. PART NO. CODE PART NO. PART NO. CODE APPLICATION
TALKING CODE SHANK

38464 0423 6686 KZ 465 38466 0423 6691 EB 38466 914


0155-19 SDRSN146M38466 0155-19

OPENING PRESSURE
NEW AND SERVICE
INJECTOR Mpa (PSI) MAX VALVE LIFT NO. OF HOLES
NO. mm (inches) @ DIA. mm (inches)

38465 22.0 –22.8 (3190 - 3306) 0.425 (.0167) 5 @ 0.236 (.0093)

For bar, multiply Mpa by 10


Maximum valve lift for service : +0.05 mm beyond value shown in table.

You might also like