Scribd
Upload
158 views2 pages

Injector Specs for Engineers

This document provides specifications for a nozzle holder assembly, including: 1. The assembly number, date, applications (see page 2), test stand used, and calibration fluid specifications. 2. A list of 7 item numbers, part numbers, quantities, and descriptions for the nozzle holder assembly components. 3. Information on page 2 provides the injector and nozzle part numbers and applications, as well as opening pressure, maximum valve lift, and cap color specifications for the injector.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views2 pages

Injector Specs for Engineers

This document provides specifications for a nozzle holder assembly, including: 1. The assembly number, date, applications (see page 2), test stand used, and calibration fluid specifications. 2. A list of 7 item numbers, part numbers, quantities, and descriptions for the nozzle holder assembly components. 3. Information on page 2 provides the injector and nozzle part numbers and applications, as well as opening pressure, maximum valve lift, and cap color specifications for the injector.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

INJECTOR SPECIFICATION

EDITION: 2 NOZZLE HOLDER


APPLICATIONS : SEE PAGE 2 ASSEMBLY NO. 38183
DATED: 07-12-2005 SUPERSEDES:
CUSTOMER: JCB CUSTOMER PART NO. SEE PAGE 2

TEST STAND: ISO 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID: SAE J967 / ISO 4113 Service Manual 99118 for additional
(Ref. S.B. 201) AT ROOM TEMPERATURE (70Ε-80Ε F) service information.
2. CALIBRATING HIGH PRESSURE PIPES: 0.063 X 12"
(1.6 X 305 mm)

ITEM PART NO. QTY. DESCRIPTION


NO.
*(1 PREFERRED
1 38182 1 BODY, nozzle holder 2 MAX.)
PART THICKNESS
NO. mm (inches)
781229 1.000 (.0393)
2 12406 2 “O” RING
781230 1.050 (.0413)
781231 1.100 (.0433)
1 781232 1.150 (.0453)
3 SEE * SHIM, pressure 781233 1.200 (.0472)
TABLE Adjusting 781234 1.250 (.0492)
781235 1.300 (.0512)
781236 1.350 (.0531)
4 37353 1 SPRING, pressure 781237 1.400 (.0551)
Adjusting 781238 1.450 (.0571)
781239 1.500 (.0591)
5 37064 1 SEAT, spring 781240 1.550 (.0610)
781241 1.600 (.0630)
781242 1.650 (.0650)
781243 1.700 (.0669)
6 37065 1 PLATE, assembly
2 781244 1.750 (.0689)
adapter 781245 1.800 (.0709)
781246 1.850 (.0728)
7 PAGE 2 1 NOZZLE ASSEMBLY
3
(not included in
nozzle holder assembly)
4
8 38181 1 NUT, nozzle retaining
5 (torque to 55-65 Nm or 40-47 lbf. ft)
.

9 38200 1 WASHER, sealing


6

7 FOR ENGINEERING USE ONLY


DATE ECN NO. EDITION
07-12-2005 29613 1
04-03-2006 29951 2

9
Page 2 of 2

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 38183

INJECTOR NOZZLE
STANADYNE CUSTOMER INSCRIPTION STANADYNE CUSTOMER INSCRIPTION
PART NO. PART NO. CODE PART NO. PART NO. CODE APPLICATION

38184 - 1. 184 38180 - SDLLA138P 86Kw TC


38180 GENSET

INJECTOR OPENING PRESSURE MAX VALVE CAP


NO. NEW AND SERVICE LIFT COLOUR
Mpa (PSI) mm (inches)

38184 29.00 – 29.80 (4205 – 4321) 0.250 (.0098) Pale Brown


(RAL 8025)

For bar, multiply Mpa by 10


Maximum valve lift for service : +0.05 mm beyond value shown in table.

You might also like