https://www.phoenixcontact.

com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted
currents, input current 0...0.2 to 0...11 A, unconfigured

Your advantages
 True r.m.s. value measurement
 Device can be set via DIP switches or MCR/PI-CONF-WIN configuration software
 3-way isolation

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4017918169275

Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area

Dimensions
Width 22.5 mm
Height 99 mm
Depth 114.5 mm

Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Maximum altitude < 2000 m
Degree of protection IP20
Noise immunity EN 61000-6-2

09/18/2019   Page 1 / 6
https://www.phoenixcontact.com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Technical data
Input data
Input Current measuring input
Number of inputs 3
Configurable/programmable Yes, unconfigured
Input current range 0 A ... 11 A (AC/DC)
Operate threshold 2 % (of measuring range nominal value 1/5/10 A)
Setting range for min. input current 0 A ... 200 mA
Setting range for max. input current 0 A ... 11 A
Impulse form AC, DC or distorted currents
Overload capacity 2 x IN (continuous)
Surge strength 20 x IN (1 s)
Frequency measuring range 15 Hz ... 400 Hz
Connection method Screw connection

Output data
Output name Voltage output / current output
Configurable/programmable Yes, unconfigured
Voltage output signal 0 V ... 10 V
2 V ... 10 V
-10 V ... 10 V
0 V ... 5 V
1 V ... 5 V
-5 V ... 5 V
10 V ... 0 V
10 V ... 2 V
10 V ... -10 V
5 V ... 0 V
5 V ... 1 V
5 V ... -5 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Load/output load voltage output > 10 kΩ
Load/output load current output < 500 Ω

Switching output
Output name No switching output

Power supply
Supply voltage range 20 V DC ... 30 V DC
Max. current consumption < 40 mA (without load)

Connection data
09/18/2019   Page 2 / 6
https://www.phoenixcontact.com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Technical data
Connection data
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14

General
Maximum transmission error < 0.5 % (of nominal range value under nominal conditions)
Temperature coefficient, typical < 0.025 %/K
Step response (10-90%) 330 ms (with AC)
40 ms (with DC)
Status display Green LED
Overvoltage category III
Degree of pollution 2
Rated insulation voltage 300 V AC (to earth)
Test voltage input/output 4 kV (50 Hz, 1 min.)
Test voltage input/power supply 4 kV (50 Hz, 1 min.)
Test voltage output/power supply 500 V (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2
Color green
Housing material Polyamide PA non-reinforced
Mounting position any
Conformance CE-compliant
UL, USA/Canada Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2
Connection in acc. with standard CUL
Low Voltage Directive Conformance with Low Voltage Directive
Conformance CE-compliant
UL, USA/Canada Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50

09/18/2019   Page 3 / 6
https://www.phoenixcontact.com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”

Drawings

Dimensional drawing

09/18/2019   Page 4 / 6
https://www.phoenixcontact.com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Dimensional drawing

Circuit diagram

Approvals
Approvals

09/18/2019   Page 5 / 6
https://www.phoenixcontact.com/pi/products/2814715

Current transducers - MCR-S-1/5-UI-DCI-NC - 2814715
Approvals

Approvals

UL Recognized / cUL Recognized / EAC / cULus Recognized

Ex Approvals

UL Listed / cUL Listed / cULus Listed

Approval details

UL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

cUL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

EAC 
    EAC-Zulassung

cULus Recognized 
    

Phoenix Contact 2019 © - all rights reserved

http://www.phoenixcontact.com

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com

09/18/2019   Page 6 / 6