https://www.phoenixcontact.
com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the
front, over 1600 signal conversions can be set. Order configuration, screw connection, SIL.
Your advantages
Power supply possible via DIN rail connector
Over 1600 signal conversions can be set via DIP switches on the front
Installation in zone 2 permitted
Up to SIL 2 according to EN 61508
Configurable input and output signals, including bipolar current and voltage signals
3-way electrical isolation
10 kHz limit frequency for time-critical applications
Analog signal conditioner for isolating, filtering, amplifying, and converting standard analog signals
Plug-in screw or spring-cage connection technology (Push-in technology)
Active or passive output
Status indicator for supply voltage
Key Commercial Data
Packing unit 1 pc
Weight per Piece (excluding packing) 155.400 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area
05/20/2020 Page 1 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Technical data
Dimensions
Width 12.5 mm
Height 112.5 mm
Depth 113.7 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Maximum altitude ≤ 2000 m
Degree of protection IP20 (not assessed by UL)
EN 61000-6-2 When being exposed to interference, there may be minimal
Noise immunity
deviations.
Input data
Description of the input Measuring input
Number of inputs 1
Voltage input signal 0 mV ... 50 mV
0 mV ... 60 mV
0 mV ... 75 mV
0 mV ... 100 mV
0 mV ... 120 mV
0 mV ... 150 mV
0 mV ... 200 mV
0 mV ... 300 mV
0 mV ... 500 mV
0 V ... 1 V
0 V ... 1.5 V
0 V ... 2 V
0 V ... 3 V
0 V ... 5 V
0 V ... 10 V (please indicate if different setting when ordering)
0 V ... 15 V
0 V ... 20 V
0 V ... 30 V
0 V ... 50 V
0 V ... 100 V
-50 mV ... 50 mV
-60 mV ... 60 mV
-75 mV ... 75 mV
-100 mV ... 100 mV
05/20/2020 Page 2 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Technical data
Input data
-120 mV ... 120 mV
-150 mV ... 150 mV
-200 mV ... 200 mV
-300 mV ... 300 mV
-500 mV ... 500 mV
-1 V ... 1 V
-1.5 V ... 1.5 V
-2 V ... 2 V
-3 V ... 3 V
-5 V ... 5 V
-10 V ... 10 V
-15 V ... 15 V
-20 V ... 20 V
-30 V ... 30 V
-50 V ... 50 V
-100 V ... 100 V
1 V ... 5 V
2 V ... 10 V
Current input signal 0 mA ... 1 mA (Configurable via DIP switches)
0 mA
0 mA ... 2 mA
0 mA ... 3 mA
0 mA ... 5 mA
0 mA ... 10 mA
0 mA ... 15 mA
0 mA ... 20 mA
0 mA ... 30 mA
0 mA ... 50 mA
0 mA ... 100 mA
-1 mA ... 1 mA
-1.5 mA ... 1.5 mA
-2 mA ... 2 mA
-3 mA ... 3 mA
-5 mA ... 5 mA
-10 mA ... 10 mA
-15 mA ... 15 mA
-20 mA ... 20 mA
05/20/2020 Page 3 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Technical data
Input data
-30 mA ... 30 mA
-50 mA ... 50 mA
-100 mA ... 100 mA
1 mA ... 5 mA
2 mA ... 10 mA
4 mA ... 20 mA
Min. input voltage ± 50 mV
max. input voltage ± 100 V
Max. input current ± 100 mA
Input resistance of voltage input approx. 1 MΩ (±1 V DC ... ±100 V DC)
Input resistance current input approx. 10 Ω (± 10 mA DC ... ± 100 mA DC)
Output data
Output name Screw fastening
Number of outputs 1
Configurable/programmable Yes, can be switched
Voltage output signal 0 V ... 10 V (Configurable via DIP switches)
0 V ... 5 V
2 V ... 10 V
1 V ... 5 V
-10 V ... 10 V
-5 V ... 5 V
0 V ... 2.5 V
0.5 V ... 2.5 V
-2.5 V ... 2.5 V
Current output signal 0 mA ... 5 mA
0 mA ... 10 mA
0 mA ... 20 mA (please indicate if different setting when ordering)
1 mA ... 5 mA
2 mA ... 10 mA
4 mA ... 20 mA
-5 mA ... 5 mA
-10 mA ... 10 mA
-20 mA ... 20 mA
Load/output load voltage output ≥ 1 kΩ (10 V)
Load/output load current output ≤ 600 Ω (20 mA; active)
passive: ≤ (UB-2 V) / Ioutmax
Ripple < 10 mVrms
05/20/2020 Page 4 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Technical data
Power supply
Supply voltage range 12 V DC ... 24 V DC (-20 % ... +25 %)
Connection data
Connection method Screw connection
Stripping length 7 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
General
No. of channels 1
Maximum transmission error ≤ 0.1 % (Compared to the final value)
Maximum temperature coefficient 0.0075 %/K
Limit frequency (3 dB) 10 kHz (Can be switched to 30 Hz)
Alignment zero ±4%
Alignment span ±4%
Step response (10-90%) 35 µs (at 10 kHz)
11 ms (At 30 Hz)
Protective circuit Transient protection
Overvoltage category II
Degree of pollution 2
Rated insulation voltage 300 V AC
Test voltage, input/output/supply 2.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
EN 61000-6-2 When being exposed to interference, there may be minimal
Noise immunity
deviations.
Color gray
Housing material PA 6.6-FR
Mounting position any
Conformance CE-compliant
ATEX II 3 G Ex nA IIC T4 Gc
IECEx Ex nA IIC T4 Gc
UL, USA/Canada UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC
Certificate of classification DNV GL TAA000020C
05/20/2020 Page 5 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Technical data
EMC data
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Typical deviation from the measuring range final value 1%
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Typical deviation from the measuring range final value 1%
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Typical deviation from the measuring range final value 1%
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
EN 61000-4-4
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Conformance CE-compliant
ATEX II 3 G Ex nA IIC T4 Gc
IECEx Ex nA IIC T4 Gc
UL, USA/Canada UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC
DNV GL-Temperature B
DNV GL-Humidity B
DNV GL-Vibration A
DNV GL-EMC A
Required protection according to the Rules shall be provided upon
DNV GL-Enclosure
installation on board
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
05/20/2020 Page 6 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Application drawing
Level measurement with analog input terminals (active input card)
Application drawing
Shunt measurement and Inline terminal with analog input channels within an Inline station (passive input card)
05/20/2020 Page 7 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Block diagram
05/20/2020 Page 8 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Dimensional drawing
Pictogram
05/20/2020 Page 9 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Classifications
eCl@ss
eCl@ss 4.0 27210100
eCl@ss 4.1 27210100
eCl@ss 5.0 27210100
eCl@ss 5.1 27210100
eCl@ss 6.0 27210100
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
eCl@ss 9.0 27210120
ETIM
ETIM 4.0 EC002653
ETIM 5.0 EC002653
ETIM 6.0 EC002653
ETIM 7.0 EC002653
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
UNSPSC 18.0 39121008
UNSPSC 19.0 39121008
UNSPSC 20.0 39121008
UNSPSC 21.0 39121008
Approvals
Approvals
Approvals
UL Listed / cUL Listed / Functional Safety / DNV GL / cULus Listed
Ex Approvals
IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
05/20/2020 Page 10 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Approvals
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
Functional Safety BVS Pb 01/10
DNV GL
https://approvalfinder.dnvgl.com/ TAA000020C
cULus Listed
Accessories
Accessories
Device marking
Plastic label - UC-EMLP (11X9) - 0819291
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
Plastic label - UC-EMLP (11X9) YE - 0822602
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
05/20/2020 Page 11 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Accessories
Plastic label - UC-EMLP (11X9) SR - 0828094
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
Plastic label - US-EMLP (11X9) - 0828789
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
Plastic label - US-EMLP (11X9) YE - 0828871
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
Plastic label - US-EMLP (11X9) SR - 0828872
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
Device marker - LS-EMLP (11X9) WH - 0831678
Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
05/20/2020 Page 12 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Accessories
Device marker - LS-EMLP (11X9) YE - 0831732
Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
Device marker - LS-EMLP (11X9) SR - 0831705
Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Insulating sleeve
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
05/20/2020 Page 13 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Labeled device marker
05/20/2020 Page 14 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Accessories
Plastic label - UC-EMLP (11X9) CUS - 0824547
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) YE CUS - 0824548
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) SR CUS - 0828098
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm, Number of individual labels: 10
Module carrier
Module carrier - TC-D37SUB-ADIO16-EX-P-UNI - 2924854
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-
SUB connector, 37-pos. (1:1 connection)
Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-
SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
05/20/2020 Page 15 / 16
https://www.phoenixcontact.com/us/products/2811284
Signal conditioner - MACX MCR-UI-UI - 2811284
Accessories
Power module
Power and error message module - MACX MCR-PTB - 2865625
Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN
rail connector
Power and error message module - MACX MCR-PTB-SP - 2924184
Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY
DIN rail connector
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
05/20/2020 Page 16 / 16
