Scribd
Upload
195 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for pipe and fittings according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed at various stages of fabrication including: pre-fabrication, in-process, final inspection and testing, and additional requirements. Tests include material certification, welding procedures, non-destructive testing, pressure testing, coating, and more. Buyer inspection is required to review documentation and certificates.

Uploaded by

Ali Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
195 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for pipe and fittings according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed at various stages of fabrication including: pre-fabrication, in-process, final inspection and testing, and additional requirements. Tests include material certification, welding procedures, non-destructive testing, pressure testing, coating, and more. Buyer inspection is required to review documentation and certificates.

Uploaded by

Ali Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 11/17/2013 IR010000 1 of 2


SCOPE: General Inspection plan exclusively for Pipe and fittings of new materials or materials where there are no SAMSS exist

TEST AND INSPECTION PER: Purchase Order requirement & Specifications As Noted Below

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE


(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
*** R X
Pre-Fabrication/Production Requirements
Inspection and Test plan (ITP)
Specification Details / Notes:
Inspection and Test Plan (ITP)

0020 R X Raw Material Test Certificates As per applicable code & standard for raw materials

0030 R X Welding Procedure Specification (WPS) and Procedure Refer to P.O., SAEP-352, ASME Section IX as applicable.
Qualification Records (PQR)

0040 R X NDT Personnel and Procedure Verify valid personnel qualification and approved procedure

0020
0010
***
W R X
In process inspection & test requirement
PMI/Ferrite test (As applicable)
Specification Details / Notes:
Per SAES-A-206

0020 W X Chemical Composition Per applicable Code

0030 R X Tensile, Impact test, Hardness, flattening and Guided bend test Per PO requirement or applicable Code

0040 W X PWHT Per approved drawing

0050 W R X Nondestructive testing (MT, PT, UT, RT) (As applicable) Per applicable code

0060 W X HIC testing (if required) Per IR010210

0070 W R X Repair welding Per applicable approved procedure.

0030
0010
***
H X
Final inspection & test requirements
Visual and dimensional test
Specification Details / Notes:
Per approved drawing & fabrication tolerance

0020 W R X Hydrostatic test Per applicable code

IR010000 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 11/17/2013 IR010000 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0030 W X Pickling & Passivation (If required) Per PO requirement / Per applicable standard

0040 W X Painting / coating Per PO requirement / Per applicable standard

0050 W X Marking, Handling and packing and shipment Per applicable Code

0060 X Loading and Transportation Per applicable standard

0070 R X Product test certificates and records As per applicable SAMSS and IR

0080 R X Certificate of compliance

0040
0010
*** Additional/Supplemental Requirements
If any per PO
Specification Details / Notes:

Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.

End of IR010000

You might also like