AL300PD4220

Multi-Output Power Supply/Charger

Overview
AL300PD4220 is a multi-output power supply/charger that converts a nominal
220VAC 50/60Hz input into four (4) 12VDC or 24VDC outputs.

AL300PD4220

Specifications
Input: Supervision:
• Nominal 220VAC (working range 198VAC - • AC fail supervision (form “C” contacts).
256VAC), 50/60Hz, 1.7 amp. - Notification trigger is selectable for
• Input fuse rated @ 5 amp/250V. 30 seconds (factory set) or 6 hours.
Output: • Low battery supervision (form “C” contacts).
• 12VDC or 24VDC selectable output. • Battery presence supervision (form “C” contacts).
• 12VDC or 24VDC @ 2.5 amp supply current. Visual Indicators:
• Four (4) fuse protected outputs. • AC input and DC output LED indicators.
• Outputs are rated @ 15A/32V. Electrical:
• Filtered and electronically regulated outputs. • Operating temperature: 0º C to 49º C ambient.
• Short circuit and thermal overload protection. • 15.35 or 30.7 BTU/Hr.
Battery Backup: • System AC input VA requirement: 374VA.
• Built-in charger for sealed lead acid or Mechanical:
gel type batteries. • Enclosure Dimensions (H x W x D approx.):
• Automatic switch over to stand-by battery 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
when AC fails. - Accommodates up to two (2)12VDC/7AH batteries.
• Maximum charge current 0.7 amp. • Product weight (approx.): 8.65 lbs. (3.86 kg).
• Shipping weight (approx.): 9.55 lbs. (4.26 kg).
 Enclosure Dimensions (H x W x D approximate):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
1.40” 4.85” 4.85” 1.40”
(36mm) (123mm) (123mm) (36mm)

1.20”
(31mm)

3.25”
(83mm)

12.5”
1.20” (318mm)
0.75” 0.75” 1.20”
(31mm) 11.0” (31mm)
(19mm) (279mm) (19mm)

0.9375”
1.40” (24mm) 1.40”
(36mm) (36mm)

5.10” 5.10”
(130mm) (130mm)

13.0”
(330mm)

5.10”
(130mm)
6.5625”
(167mm)

0.9375”
(24mm)

3.25”
3.25” (83mm)
(83mm)

3.25”
(83mm)

1.0” 1.0”
(25mm) (25mm)

1.0” 10.5” 1.0”

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com