Scribd
Upload
1K views1 page

Cutting Work

1) The document is a risk assessment form for cutting work activities involving gas cylinders. It identifies 4 main job steps: transportation of gas cylinders, unloading cylinders, fixing gas hoses, and working at height. 2) For each job step, potential hazards are identified like fall from vehicle/cylinder during transportation, fall or explosion during unloading, gas leakage from hoses, and fall from height. 3) Control measures are provided for each hazard like use of fire extinguisher, proper loading/unloading, hose inspection, full body harness, and fall protection anchoring. Residual risks are assessed after control measures.

Uploaded by

Guddu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
1K views1 page

Cutting Work

1) The document is a risk assessment form for cutting work activities involving gas cylinders. It identifies 4 main job steps: transportation of gas cylinders, unloading cylinders, fixing gas hoses, and working at height. 2) For each job step, potential hazards are identified like fall from vehicle/cylinder during transportation, fall or explosion during unloading, gas leakage from hoses, and fall from height. 3) Control measures are provided for each hazard like use of fire extinguisher, proper loading/unloading, hose inspection, full body harness, and fall protection anchoring. Residual risks are assessed after control measures.

Uploaded by

Guddu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Risk Assessment/Management Form

Ref:
Section / Dept: civil Activity: Risk Assessment- Location/Area -
Contractor :- Cutting work

bility

bility
Sl Basic Job Potential

Proba
Init Addition

Proba
Ri

ual
risk
Resid
Consequence Current control measures Risk rating
N Steps Hazard ial al s
o. Ris control k
k measure ra
P E A R P
ti E A R
To Provide fire Extinguisher n
before starting the activity g

All gas cylinders shall be kept


Fall from upright and cylinder shall not strike
Transportation of vehicle/Cylinder each other at the time of
1 Get Injury 1 0 0 0 2 2
Gas cylinder Trolley during transport,proper loading of cylinders
transportation shall be ensured
Cylinder shall never be rolled on
ground,it has to be carried out by
cylinder trolly only
Gas cylinder shall be unloaded with
sufficient manpower to prevent any
kind of fall or damage due to
unloading
Unloading of Fall from vehicle
2 Get Injury/Fatality Gas cylinder shall be kept away 2 0 0 2 2 4
cylinder and Explosion
always from lubricants and must
have the valve cap protection to
prevent any kind of damage to
cylinder valve
All hose pipes shall be inspected for
Fixing or any kind of damage or leakage prior
Leackage of hose Get Injury due to
3 connecting gas to start the days work. 1 0 0 0 2 2
pipe fire
hose Take hot work permit before starting
the activity
Providing full body safety harness to
the workers working at height
Daily Tool
4 Working at Height Fall from Height Get Injury/Fatality Providing proper anchoring point to 2 0 0 2 3 6 2 0 0 2 2 4
anchor the full body safety Box talk
harness.Platform &staging to be
made as per standard.
Prepared By Approved By Reviwed By
Contractor Contractor
Date Date Date
1of1

You might also like