ILLUSTRATED PARTS LIST

MODEL NUMBER ST 427T

PRODUCT NUMBER 961 93 01-33
MFG. ID. NUMBER 96193013301

591 10 15-95 Rev. 6

REPAIR PARTS AUGER HOUSING / IMPELLER ASSEMBLY
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

6
6
7

8 7 4

1 4

5
5

05.09.046-A 4

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 582 86 77-01 AUGER TRANSMISSION, 5 595 08 66-01 NUT. NYLOCK 1/4-20
CAST IRON 6 585 69 13-01 NUT. FLANGE. NY
2 585 19 83-03 IMPELLER, CAST IRON LOCK 5/16-18 - BLK
3 593 04 28-02 CHUTE. DISCHARGE. BASE – 7 585 69 12-01 BOLT. CARRIAGE. WAFER
CAST ALUMINUM HEAD 5/16-18 X 5/8- BLK
4 588 07 75-02 BOLT. SHEAR 1/4-20 8 532 19 87-91 BEARING. BALL

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
2
REPAIR PARTS AUGER HOUSING / IMPELLER ASSEMBLY
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

KEY PART
NO. NO. DESCRIPTION
1 588 61 02-38 AUGER HOUSING 27 LS
2 585 04 84-02 SHAVE PLATE 27 LS MS428
3 596 03 94-01 BOLT CARRIAGE 5/16-18 X .625
4 532 15 53-77 NUT 5/16-18 HEX TOP LOCK
3 5X
2

4 5X

05.09.034-A

5 6

4 KEY PART
3 NO. NO. DESCRIPTION
1 581 97 01-03 AUGER RIBBON 27 RH LS
2 581 97 02-03 AUGER RIBBON 27 LH LS
3 580 85 55-01 SUPPORT AUGER BEARING
4 532 11 04-85 BEARING IDLER 6203
5 812 00 00-28 RING RETAINING #5100-52
5 6 585 51 78-01 SCREW 1/4-20 X .65 W/DOG
2
1 POINT
6 43 05.09.019-D

KEY PART
NO. NO. DESCRIPTION
1 1 532 19 21-99 TOOL CLEANOUT
2 586 41 48-02 AUGER FRONT TRIM ASM
3 586 33 03-02 TRIM AUGER HOUSING WING RH
2 4 586 33 04-02 TRIM AUGER HOUSING WING LH
5 817 06 04-10 SCREW HEX WASHER TRI-
3 LOBE 1/4-20 X 3/4
4
5
5
5 5
05.09.047-A

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
3
REPAIR PARTS AUGER HOUSING / IMPELLER ASSEMBLY
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

2
3
KEY PART
NO. NO. DESCRIPTION
1 585 10 90-04 SUPPORT GEARBOX LS
1
2 585 69 13-01 NUT HEX FLG NYLOCK BLK
5/16-18
2 3 585 83 20-01 BOLT CARRIAGE BLK 5/16-18
X 5/8 BLK
4 872 11 05-10 BOLT CARRIAGE 5/16-18 X
1-1/4
4

05.09.048-A

3
KEY PART
NO. NO. DESCRIPTION
1 532 40 78-34 SKID PLATE
2 585 69 17-01 BOLT CARRIAGE 5/16-18 X
2 .750 – BLK
1 3 585 69 13-01 NUT FLANGE NYLOCK 5/16-18
– BLK

3 05.12.003-A
1

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
4
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

*14 *19
*16

8 *15
10 2
7

3 4
9 4
7

*18
20

1
*17

4
12
6
4

5
13
11 05.11.011-B

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 588 07 78-02 CHUTE WELDMENT 13 532 05 93-49 PUSH NUT
2 – – – – – – RIVETED DEFLECTOR *14 532 18 45-05 DEFLECTOR SPRING
ASSEMBLY *15 501 41 73-01 CARRIAGE BOLT 1/4-20 X .544
3 – – – – – – DEFLECTOR SEAL *16 585 69 14-01 NUT 1/4-20
4 – – – – – – POP RIVET *17 585 83 20-01 CARRIAGE BOLT 3/8-16 X .625
5 – – – – – – CHUTE SNOW SHIELD *18 873 97 05-00 NUT 5/16-18
6 – – – – – – SHIELD STRAP RETAINER *19 501 41 74-01 WASHER .362 X .625 X .205
7 590 58 70-02 CONTROL.CHUTE. NYLON
DEFLECTOR.BOWDEN 20 532 18 15-80 CLIP, DUAL
8 581 72 61-01 SHOULDER BOLT 1/4-20
9 590 80 09-01 PIN CLEVIS 1/4 X .438 NOTE: ALL ITEMS MARKED WITH AN * ARE PRO-
10 532 42 33-03 HAIRPIN RETAINER VIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH
11 532 43 55-82 CHUTE GUARD PRODUCT.
12 532 43 56-16 GUARD RETURN SPRING
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
5
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

11
19
6
35
4 43
16 41 42
30 35 15
17 40
12 35 35
5
44 25 26 27 25
26 2944
29 13
17 23 28
22 23 16 30
18
31 7
29 29 23
8 44 20 17
44 23
31
15 36 29 37ATTACHES P-CLIP FOR INTERLOCK
CABLE TO BRACKET 1 17 29
35 44 7 7
7 32 44
7 7 10
35 23 29
23 44
21 31 38
29
14 17 44
17 32
16
30 26 24 33 2
24
33 7 33
25 24 7
29 46 24
44

45 3
34

9
P-CLIP ATTACHES TO UPPER HANDLE USING DOUBLE
7
39
CLIP FIR TREE IN ROTATOR CABLE MODULE

05.07.030-D

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
6
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 589 62 64-02 CONSOLE ASSY – 400 SERIES 27 596 23 84-01 1/4-20 X 3/4 CARRIAGE BOLT
2 589 62 68-04 CONSOLE SIDE RHS GREY 28 532 19 17-30 1/4-20 HEX FLANGE LOCK
3 589 62 69-02 BRACKET REAR CONSOLE NUT
4 589 75 42-01 CONSOLE ASSY – LEFT SIDE 29 597 42 55-01 1/4-20 X 3/8 HEX WASHER HD
PANEL BOLT
5 589 75 43-01 BRACKET ROTATOR REAR 30 593 09 20-01 BOLT SHOULDER 3/8 X 1.325
6 596 92 41-01 LEVER ROTATOR 31 594 94 44-01 NUT 5/16-18 HEX FLANGE
7 589 77 22-01 SCREW BUTTON HEAD NYLOCK
WASHER CAP SCREW 32 593 08 42-01 PLUG 7/8
8 589 79 59-01 BRACKET CABLE CHUTE 33 817 06 04-10 SCREW 1/4-20 x 5/8 HEX
ROTATOR WASHER
9 532 19 79-91 P-CLIP 34 593 07 92-01 HARNESS UPPER
10 589 79 65-01 BRACKET HYDRO CABLE 35 590 79 06-01 BUSHING LEVER
11 589 80 11-01 KNOB CHUTE ROTATOR 36 581 72 61-01 BOLT SHOULDER_1_4-20_
12 590 77 47-01 LEVER HYDRO CABLE TRILOB
13 589 75 41-01 BRACKET HYDRO LEVER 37 532 42 81-24 FIR TREE
14 589 75 40-01 BRACKET DEFLECTOR LEVER 38 532 17 01-65 BOLT SHOULDER_5-16_18_
15 589 75 44-01 LEVER HYDRO DEFLECTOR THD_FORM
16 589 79 61-01 BUTTON BOLT CARRIER 39 501 40 66-01 SCREW
17 589 79 62-01 PAD FRICTION 40 585 80 50-01 SWITCH HEATED GRIP
18 589 79 63-01 KNOB DEFLECTOR BLACK
19 589 79 64-01 KNOB HYDRO 41 596 51 55-01 HOUR METER
20 589 80 05-01 SPRING HYDRO 42 591 06 65-01 SWITCH - 3 POSITION
21 596 91 84-01 SPRING DEFLECTOR ROTARY
22 593 07 51-01 SPRING ROTATOR 43 594 72 18-01 IGNITION SWITCH - 3
23 597 36 74-01 WASHER .406 ID 1.00 OD POSITION
X .109 THK 44 597 42 57-01 1/4 LOCK WASHER
24 532 41 76-93 1/4-20 CLIP ON NUT 45 589 62 68-03 CONSOLE SIDE LHS GREY
25 590 79 17-01 PIN CLEVIS .375 X 1.25 46 597 48 92-02 CHUTE DEFLECTOR
26 532 42 33-03 SPRING HAIRPIN SUPPORT BRACE

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
7
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

2 4 KEY PART
NO. NO. DESCRIPTION
1
1 532 42 11-38 SHIELD DEFLECTOR
2 532 43 58-31 STRAP
3 3 586 11 80-01 SCREW MACHINE 8-32 X .50 -
BLK
4 586 11 81-01 NUT HEX NYLOCK 8-32 - BLK
2 3

4 05.11.009-B

3 KEY PART
NO. NO. DESCRIPTION
3 5 1 589 28 95-03 CABLE, POWER STEER - LHS
4 2 589 28 95-04 CABLE, POWER STEER - RHS
6 3 589 80 38-01 LEVER, CONTROL
4 581 32 95-01 SCREW HI-LO 13-16 X 1.50
2
5 817 06 04-10 SCREW 1/4-20 X .625
4 6 532 43 17-62 PIN, GROOVED
7 812 00 00-14 E-RING
5
7
7
6
1 05.08.018-B

KEY PART
2 NO. NO. DESCRIPTION
3
3 1 593 85 34-01 CABLE INTERLOCK
2 532 43 17-62 PIN GROOVED
2 1 4 3 812 00 00-14 E-RING
4 581 15 12-01 SPRING RETURN
5 532 19 79-91 CLIP CABLE BLACK
5 05.08.001-C

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
8
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

2
KEY PART
1 NO. NO. DESCRIPTION
2
1 590 49 36-01 GRIP, HEATED, DSST SHO
2 532 44 22-50 SCREW PAN HD TORX
1 1/4-20 X .75

05.08.008-G

3 2
7
8
6
5
2 3

1
6 4
5 05.19.012-A
3 1

KEY PART
NO. NO. DESCRIPTION
1 582 47 86-02 NUT - 1/4-20 FLANGE LOCKING
2 588 83 94-01 J-HOOK
3 585 98 93-01 BUMPER - RUBBER
4 590 94 29-02 BATTERY STRAP
5 532 43 80-39 SCREW M6X1 X 16L
6 596 02 98-01 LOCK WASHER - 1/4
7 532 43 71-57 BATTERY AGM 12V 230CCA
8 594 08 65-01 SQUARE NUT - M6X1

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
9
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

KEY PART
NO. NO. DESCRIPTION
3
1 590 07 13-01 4.25 X 4.25 LIGHT
2 590 43 98-01 LIGHT MOUNTING BRACKET
2 3 532 42 79-42 HEX HD 5/16-18 FLANGE
NYLOCK

05.19.006-A

1
1 KEY PART
NO. NO. DESCRIPTION
1 585 69 11-01 SCREW 1/4-20 X 1.0
2 593 08 46-03 ENGINE CONTROL UNIT –
EFI 369cc
3 593 07 93-01 HARNESS - LOWER EFI
2 4 595 27 17-01 CLIP, CORRUGATED TUBE
3 5 532 19 79-91 P CLIP
6 597 43 41-01 M6 X 1.0 NYLOC NUT

6 6
4

05.19.010-A 5

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
10
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

5
7
2

11
3

11 10
9

1
2
7
11

8
12
05.08.017-C

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 532 19 79-91 CLIP 8 532 42 79-42 NUT
2 532 42 33-03 HAIRPIN 9 584 65 22-01 CLIP, DUAL
3 579 76 36-01 CABLE - IMPELLER 10 585 51 78-01 SCREW - 1/4-20 x .65
4 589 26 52-01 COVER - CABLE 11 592 85 74-01 CLIP, CABLE
5 589 28 98-01 CABLE - HYDRO DRIVE 12 594 71 65-01 AUGER CABLE SPRING
6 590 02 66-01 CABLE - HYDRO SPEED
7 590 80 09-01 PIN - CLEVIS

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
11
REPAIR PARTS CONTROL PANEL / DISCHARGE CHUTE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

2 92
4
4

3
5

6
4

7
05.08.019-B

KEY PART
NO. NO. DESCRIPTION
1 591 08 68-01 CABLE CHUTE ROTATOR
ASM - LOCKING
2 581 32 94-01 PIN CLEVIS 5/16 X 7/8
3 596 71 72-01 PIN CLEVIS 1/4 X 3/4
4 532 42 33-03 HAIRPIN SOFT ZINC
5 584 65 22-01 CLIP CONDUIT DOUBLE
6 586 68 21-01 WASHER
7 589 79 60-01 ROTATOR LOCK LEVER
8 532 18 42-05 3/16 X 1.0 ROLL PIN
9 595 08 66-01 NUT 1/4-20 HEX NYLOC

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
12
REPAIR PARTS HANDLES
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

6
10
5 KEY PART
NO. NO. DESCRIPTION
1 589 26 45-02 SUPPORT
2 817 00 05-10 BOLT 5/16-18 x .625
10 1 3 582 91 79-01 STUD - 5/16-18
7 4 589 87 57-02 HANDLE - LOWER
11 5 590 94 28-02 COVER - BATTERY
10
6 595 02 62-01 STUD - BATTERY COVER
8 7 501 06 71-01 CARRIAGE BOLT 5/16-18
4 8 532 15 53-77 NUT - 5/16-18
9 9 594 94 06-01 KNOB
10 585 98 93-01 BUMPER
2 11 595 51 79-01 SCREW - 3/8-16 MATHREAD

11 3
05.05.003-B

1 KEY PART
NO. NO. DESCRIPTION
1 588 16 08-03 UPPER HANDLE
2 532 19 19-38 HANDLE KNOB STD BLACK
3 588 05 99-01 SCREW 5/16-18 X 2.25
2 CONCAVE HEAD WITH PATCH

2
05.06.001-G

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
13
REPAIR PARTS DRIVE
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

5
10
4 1
6

10
7

9 5

8 12

14
62
11 13
12 05.02.004-B
KEY PART KEY PART
NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 589 28 88-02 TRANSMISSION MOUNT 8 595 51 76-01 SHOULDER BOLT
2 589 28 90-02 SPEED BELCRANK 9 532 16 96-75 HAIR PIN
3 589 28 93-01 SPEED ROD 10 589 26 37-01 RETURN SPRING
4 589 28 87-01 TRANSMISSION 11 583 80 86-01 BELLY PAN TRACK
5 872 11 05-10 5/16-18 X 1.25 CARRIAGE BOLT 12 585 51 78-01 1/4-20 DOG POINT SCREW
6 532 75 11-53 5/16-18 FLANGE LOCK NUT 13 539 99 09-97 WINGNUT - 1/4-20 NYLOC
7 532 42 88-67 5/16-18 BOLT 14 532 05 38-47 THRUST WASHER

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
14
REPAIR PARTS CHASSIS / ENGINE / PULLEYS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

8
12 1
20 3 24
7 21 23
22
11
2
6
9 31

5 27
7
10 25
7 29

7 7
18
29
15
29
19 4 17
7
14 26 25

13 16
7 29
30

28
05.04.008-B

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 589 26 22-01 PULLEY ENGINE 17 589 26 29-02 ARM IDLER
2 582 38 84-01 BOLT 18 589 26 36-01 SCREW HEX HEAD SHOULDER
3 589 26 26-02 BELT 5L 19 817 06 04-08 SCREW
4 589 26 34-02 BRACKET WELDMENT IDLER 20 582 64 07-02 BELT 3L
ARM 21 596 20 41-01 WASHER
5 589 28 45-01 BOLT CARRIAGE 5/16-18 22 874 61 05-12 SCREW
6 589 26 27-02 PULLEY IDLER 23 596 23 88-01 WASHER
7 594 94 44-01 NUT 24 597 20 76-01 GUIDE BELT 3L FRICTION 5L
8 593 19 25-02 ARM WELDMENT IDLER IMPELLER
9 581 14 14-02 PULLEY IDLER FLANGELESS 2.0 25 589 26 38-01 PULLEY IMPELLER DD 5L HD
10 589 26 37-01 SPRING IDLER RETURN 26 595 51 79-01 SCREW FLANGE HEAD CAP
11 580 75 30-01 SPRING WITH DOG POINT 3/8-16
12 581 41 38-01 BOLT 27 589 26 25-05 GUIDE BELT 5L
13 579 76 33-01 ARM IMPELLER BRAKE HD 28 501 59 54-02 INTERFACE BRACKET
14 587 34 37-01 BUSHING 29 596 03 05-01 SCREW
15 596 32 22-01 BOLT 30 581 63 20-02 LOWER BELT KEEPER
16 579 76 35-01 SPRING EXTENSION BRAKE 31 874 76 05-28 SCREW 5/16-18 X 1.75

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
15
REPAIR PARTS CHASSIS / ENGINE / PULLEYS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

2
KEY PART
NO. NO. DESCRIPTION
3
3 1 587 10 55-01 BELT COVER HI CRANK
2 532 14 50-06 CABLE GUIDE
3 – – – – – – BOLT HEX WSH THDRL
1/4-20 X 1
4 – – – – – – PALNUT 1/4 IN

4
1

4 05.04.004-B

3 7 4
4
1 4
7
2 8 5
4
4

7 4

5 6 05.01.009-A
4 4

KEY PART
NO. NO. DESCRIPTION
1 583 80 80-02 FRAME TOP
2 583 80 84-03 FRAME SIDE LHS
3 583 80 84-04 FRAME SIDE RHS
4 595 51 79-01 SCREW 3/8-16 X .75
MATHREAD
5 817 06 04-10 SCREW 1/4-20 x .625
6 532 15 04-06 SCREW 3/8-16 x 1.28
7 532 42 88-67 SCREW 5/16-18 x .75
8 590 04 46-02 BRACKET NUT

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
16
REPAIR PARTS WHEELS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

35
21 34
50 36
51 38
21
49
52 22 25 32
44 23 37 13
2 20 19 24
7
15
8 14
5
8
48 3340 4
47
29 10 17
9 32 1 11 12 18
43

6 9 20
3 20 9
27 31
28 30 9 16 39 10
26
42 41 05.15.007-C
32
46
45 46

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
17
REPAIR PARTS WHEELS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 589 33 04-02 FRAME - TRACK 30 590 55 41-01 GUIDE - TRACK
2 593 09 21-01 GEAR - TRANSMISSION 31 590 55 42-02 BRACKET - TRACK GUIDE
3 589 33 18-01 GEAR - TRACK 32 594 94 44-01 NUT - 5/16-18 FLANGE NYLOC
4 589 33 24-01 ARM - ADJUSTMENT LHS 33 590 55 43-02 BOLT - SHOULDER .5”
5 589 33 24-02 ARM - ADJUSTMENT RHS 34 590 59 43-01 ROD - BUCKET HEIGHT
6 589 45 95-01 AXLE - TRACK CONTROL
7 589 34 12-01 ACTUATOR - LOCKABLE GAS 35 590 59 42-01 LEVER - BUCKET HEIGHT
ASSIST 36 590 59 45-01 WASHER - WAVE .269 ID
8 532 42 88-67 SCREW - 5/16-18 X .75 37 590 59 44-01 AXLE - BUCKET HEIGHT
9 595 51 77-01 SCREW - 5/16-18 X .75 Mathread CONTROL
10 595 51 79-01 SCREW - 3/8-16 X .75 Mathread 38 595 08 66-01 NUT - 1/4-20 NYLOC
11 532 18 89-67 WASHER - HARDENED 39 590 69 85-01 SPACER PLATE - 1.5 OD
12 812 00 00-29 KLIPRING 40 596 43 35-01 NUT 3/8-16 HEX JAM
13 589 35 36-01 BOLT - SHOULDER 10 MM 41 582 47 86-02 NUT - 1/4-20 FLANGE SIDE
14 589 35 38-01 PIN - 5/16 LOCK
15 532 12 47-88 RETAINER - HAIRPIN 42 874 78 04-24 SCREW - 1/4-20 X 1.5
16 590 55 44-01 SPROCKET - TRACK DRIVE 43 590 55 36-01 MOUNT - BEARING
17 589 36 78-01 WHEEL - TRACK IDLER 44 589 48 16-01 SPRING - EXTENSION
18 589 36 75-01 BELT - TRACK DRIVE 45 590 84 96-02 COVER - TRACK GEAR
19 589 79 32-02 BRACKET - LIFT STOP 46 585 51 78-01 SCREW - 1/4-20 X .65 DOG
20 590 00 06-01 CARRIER - WITH BEARING POINT
21 589 92 70-01 NUT - 10-24 FLANGE NYLOC 47 590 84 84-02 COVER - GAS STRUT
22 597 72 44-02 ARM - BUCKET HEIGHT RELEASE HEAD
ADJUSTER 48 596 56 53-01 WASHER - 3/8
23 589 74 65-01 WASHER - WAVE .393 ID 49 595 08 04-01 BRACKET - BUCKET HEIGHT
24 589 64 53-01 BUSHING - HEIGHT ADJUSTER LEVER
25 532 70 02-16 SCREW - 10-24 X .375 50 589 74 59-01 CABLE ASSY - BUCKET
26 590 55 37-01 MOUNT - BEARING STRAP HEIGHT ADJUST
27 590 55 38-01 BEARING R16-2RS 51 817 41 13-08 13-16 x .50 HI-LO SCREW
28 590 55 39-01 SPACER - TRACK AXLE 52 592 85 74-01 CLIP, CABLE
29 590 55 40-01 ROD END - 3/8

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
18
REPAIR PARTS BAG OF PARTS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

15

14 12

5
9
16

8
7 13
1
6
3 2

10

11
4 05.18.010-C

KEY PART KEY PART

NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 588 07 75-02 BOLT 1/4-20 X 1.81 11 501 41 74-01 WASHER NYLON
2 595 08 66-01 NUT NYLOCK 1/4-20 12 591 07 06-01 IGNITION KEY
3 501 41 73-01 BOLT SHOULDER 13 591 08 74-01 CHUTE RETAINER
4 585 69 14-01 NUT HEX FL 1/4-20 CTR 14 532 18 42-05 ROLL PIN
5 585 69 10-01 NUT NYLOCK 3/8-16 15 589 79 60-01 ROTATOR TRIGGER
6 588 05 99-01 BOLT 5/16-18 X 2.25 CONCAVE 16 589 80 11-01 KNOB CHUTE ROTATOR
7 532 19 19-38 KNOB 5/16-18 TWO-WING NI 580 94 77-05 BAG PLASTIC 6.5X10.5
8 585 83 20-01 BOLT 5/16-18 X .625 WARNING
9 873 97 05-00 NUT SERR FL LOCK 5/16-18 NI 581 03 01-36 LABEL, HARDWARE BAG
10 532 18 45-05 SPRING DEFLECT CHUTE NI 588 07 76-13 KIT REPLACEMENT BAG OF
PARTS

KEY PART
NO. NO. DESCRIPTION
1 1 532 44 30-59 SAFETY IGNITION KEY KIT
01.14.009-B

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
19
REPAIR PARTS DECALS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

6
4 7

1 9

3
2
8
5

10 05.16.011-A

KEY PART
NO. NO. DESCRIPTION
1 532 18 40-45 DECAL AUGER
2 590 81 22-01 DECAL CHUTE
3 532 19 96-83 DECAL AUGER SAFETY
4 532 18 40-28 DECAL BELT GUARD
5 593 09 25-01 DECAL THROTTLE
6 593 09 26-01 DECAL CONSOLE WARNING
7 593 09 27-01 DECAL CONSOLE INSTRUCTION
8 593 14 69-01 DECAL FUSE
9 593 14 70-01 DECAL REPLACEMENT PARTS
10 588 04 98-01 DECAL NOISE LEVEL

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
20
REPAIR PARTS DECALS
SNOW THROWER - MODEL NO. ST 427T (96193013301), PRODUCT NO. 961 93 01-33

1 4

7
6

1 3

KEY PART
NO. NO. DESCRIPTION
1 532 19 96-83 DECAL, DANGER
3 590 81 22-01 DECAL, DANGER, DEFLECTOR CHUTE
4 532 18 40-45 DECAL, DANGER
6 532 18 40-28 DECAL, BELT GUIDE
7 593 09 63-01 DECAL, AUGER FRONT
- - 590 69 72-01 DECAL, ENGINE REWIND (NOT SHOWN)
- - 532 42 86-77 "H" EMBLEM (NOT SHOWN)
- - 114 07 23-49 OPERATOR’S MANUAL, ENGLISH, FRENCH,
SPANISH

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
21
ENGINE, LCT COMPLETE ENGINE-592919401

22
ENGINE, LCT COMPLETE ENGINE-592919401
KEY PART KEY PART
NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 587 17 68-01 CYLINDER HEAD 37 532 43 55-34 SMALL BLACK OIL DIPSTICK
2 532 42 96-06 PUSH ROD & PLATE KIT (W/ (PLASTIC)
COVER GSKT) 38 532 42 96-12 ROCKER ARM KIT (W/ GASKET)
3 532 42 93-03 VALVE COVER (W/ GASKET) 40 532 42 92-42 NON-REMOVABLE PLASTIC
5 582 50 52-01 PISTON AND ROD ASSENBLY PLUG
7 532 42 93-13 CAMSHAFT - MCR 43 580 35 38-01 BREATHER TUBE
8 532 44 39-00 FLYWHEEL - ELEC START (5- MA- 49 532 43 54-94 OIL DRAIN PLUG W/WASHER
GNETS) 50 597 35 93-01 TOP SHROUD
9 532 42 93-06 COOLING FAN - FLYWHEEL 50 597 35 94-01 THROTTLE BODY COVER
10 587 15 13-01 CRANKSHAFT #18 KEYED 51 532 42 92-31 SHIELD - CYLINDER
13 597 35 79-01 MUFFLER KIT 55 587 13 99-01 OIL DRAIN TUBE W/ CAP NUT
14 597 35 80-01 FUEL TANK ASSEMBLY (PUMP 56 597 35 99-01 THROTTLE BODY VAPOR
NOT INCLUDED) SHIELD
16 597 35 81-01 FUEL CAP 59 597 36 01-01 RECOIL SHROUD
17 597 35 82-01 THROTTLE BODY ASSEMBLY 59 597 36 02-01 SHROUD - PTO SIDE
18 532 44 39-44 CDI IGNITION COIL 60 597 36 03-01 CHARGING COIL (75-WATT AC)
20 532 42 92-55 SPARK PLUG 62 532 42 49-68 STARTER GRIP-SNOW
23 597 35 83-01 FUEL HOSE KIT (QTY 3 W/ 65 581 37 29-01 TAPPET KIT (SET OF 2)
CLAMPS) 69 586 32 67-01 THROTTLE BODY MTG STUD KIT (2)
28 582 62 15-01 RECOIL STARTER 72 597 36 04-01 HOP LABEL KIT
29 582 62 16-01 STARTER CUP 75 532 42 92-32 SHIELD - FLYWHEEL
30 597 35 86-01 BLOWER HOUSING 77 532 43 26-88 RECOIL BOLT KIT (3 BOLTS PER
31 597 35 87-01 CRANKCASE COVER (COM- KIT)
PLETE ASSEMBLY) 78 585 77 13-01 BREATHER TUBE RETAINING
32 532 42 93-16 OIL SEAL KIT STRAP
33 597 35 88-01 DIVIDER PLATE (BEWTEEN TANK 81 585 29 72-01 WOODRUFF FLYWHEEL KEYS
AND MUFFLER) 82 585 02 05-01 THROTTLE BODY SPACER KIT
33 597 35 89-01 BRACKET - TOP SHROUD SUP- 85 586 32 56-01 FUEL TANK STRAINER
PORT 86 586 32 74-01 CYLINDER HEAD BOLT KIT (4)
33 597 35 90-01 BRACKET - SHROUD MOUNTING 87 586 32 70-01 CC COVER BOLT KIT (7)
(STARTER SIDE) 91 587 99 41-04 CRANKSHAFT GASKET KIT
33 597 35 91-01 BRACKET - SHROUD SUPPORT 92 587 99 52-01 VALVE COVER BOLT W/ SEAL
(THROTTLE BODY SIDE) 95 597 36 06-01 FUEL FILTER (EFI)
34 532 43 69-66 SPARK PLUG BOOT - WITH 96 597 36 07-01 FUEL PUMP (EFI) W/SCREWS
METAL SHIELD 9999 593 08 46-03 ECU
35 597 35 92-01 12V ELECTRIC STARTER
36 587 17 94-01 ENGINE GASKET KIT

23
05.16.19 SR/JSE