OPERATING MANUAL
DIGITAL TIMER
MDT-1310F,2312F
MDT 1310F
MDT 2312F
+ + +
- - - R
+ + +
Quadra I RESET
‐ ‐ ‐
96 x 96 mm 72 x 72 mm
Technical Specification
Description MDT - 1310F MDT - 2312F
Dimension 96 X 96 X 50 mm 72 X 72 X 60 mm
Panel Cutout 92 X 92 mm 68 X 68 mm
Display 7 segment, 3 digit, 7 segment, 3 digit,
0.56”, RED LED 0.4”, RED LED
Timer Type Multi-range timer
Resetting
RST key in front and back
Timer
Counting
Up or Down counting
Direction
Output 1 relay, 2 C/O
Input Start pulse M/S
Relay Rating 230V AC, 5 AMP
Supply 230V AC, 50 Hz
NOTE:
Parameter setting is done by using Left First thumbwheel and reset key.:
1. Left first thumbwheel is used to change parameter
2. Reset key is used to change parameter value
MDT-1310F, 2312F Page-1 www.multispanindia.com
Parameter setting:
1. For parameter setting, Press reset key then power on, display will show by default
Parameter.
Left First
Thumbwheel Reset Key + Power ON
Time unit (Sec,Min,Hour) (Press reset key to
100
Change parameter value)
Time Range: (999,99.9,9.99 For Sec.) (Press reset key to
200 (999,99.9 For Min.) Change parameter value)
(999,99.9 For Hour.)
Operating Relay Mode (Delayed ON, Delayed OFF)
300
(Press reset key to change parameter value)
400 Counting Direction (UP & DOWN)
500 Memory ( YES Or NO)(Press reset key to change parameter value)
Auto Manual Mode
600 ( IF Time = 0 then manual mode is selected
IF Time = 0 (Range 0 - 99 SEC.) then auto mode selected)
700
800 OUT
900
000
Press reset key to Save & Exit
NOTE:
1. In manual mode press reset key to reset, set point.
2. In Auto mode , set point is automatically reset after reset time is
reaches to set value.
MDT-1310F, 2312F Page-2 www.multispanindia.com
TERMINAL CONNECTION DIAGRAM:
20 19 18 17 16 15 14 13 12 11
NO C NC NO C NC
Relay Relay
Range: 0 To 99.9/999 SEC/MIN./HOUR
230V AC
50Hz, 4VA
START RESET
L N
1 2 3 4 5 6 7 8 9 10
MDT-1310F
1 L NO 8
230V AC
50Hz, 4VA
2 N RELAY C 9
3 NC 10
4 11
5 NO 12
RESET
6 RELAY C 13
START
PULSE
7 NC 14
MDT-2312F
MDT-1310F, 2312F Page-3 www.multispanindia.com
NOTE:
Product improvement and upgrade is a constant procedure. So for more updated operating information and support,
Please contact our helpline : 9978 9914 74 /76/ 82 or Email at Service@multispanindia.com Ver:01-2016
MDT-1310F, 2312F Page-4 www.multispanindia.com
