User Guide

-1-
 About This User Guide

Disclaimer

Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide
warranty or replacement service.

The pictures in this user guide are for reference only. If there are any pictures which not match
the actual product, please take actual products as the standard. Updated information is subject to
change without notice.

All information contained in this guide are protected by copyright, and our company reserves all
rights. All or part of this guide is prohibited to excerpt, copy, bundle other products, or sell without
the written permission from us.

Our company has the right of final interpretation of this manual.

Service information

If you need more technical support, please call us or send us an email. We are happy to serve
you.

-2-
Version record

version number Version description Version date

LW-1.10A Initial version 2017-12-12

1. Add small language keyboard

setting barcode;
LW-1.10E
2. The virtual Bluetooth mode 2018-02-05
20：52：52 Jan 24 2018
setting the barcode;

3. HID search setting the barcode.

SW:LW-1.10M 17:24:17 Apr 11 2018 Repair cannot be reconnected

2018-6-30
Boot: 1.02A automatically

SW:LW-1.16A 17:40:05 Aug 29 2018

Fix automatic adaptation 2018-8-30
Boot: 1.04A

1, repair upload menu data

2, increase the Belgian French

SW:LW-1.17B 17:13:18 Sep 27 2018
keyboard 2018-9-28
Boot: 1.04A
3, increase the ending suffix Tab

4, increase the cast large,

-3-
 lowercase and no conversion case

SW:LW-1.17D 12:40:19 Nov 06 2018 Fix bugs, BLE mode sometimes

2019-1-5
Boot: 1.04A fails

Modify the settings menu (no

SW:LW-1.18B.17：27:56 Mar 15 2019
need to read the settings and exit 2019-3-29
Boot: 1.05A settings)

Add control character escape

function

Increase and hide more byte bits

setting code

Add UPC-A to EAN-13

Add upc-e to UPC-A

Add UPC / EAN / Jan additional

code

SW:LW-1.19B 10:23:47 May 20 2019

Add ean to ISBN 2019-05-21
Boot: 1.05A
Add ean to ISSN

Can support unlimited length

setting of one-dimensional
barcode

Add support for reverse barcode

Increase codeID

Increase AIM ID

Add control character escape

-4-
 Add auto sense

Repair the disconnection

SW:LW-1.19C 16:58:20 Aug 15 2019
phenomenon under the specific 2019-10-30
Boot: 1.04A
length of ble mode

V1.0.5

-5-
 CATALOG

1.Product Introduction ................................................................................................................ - 11 -

1.1 Main feature ................................................................................................................... - 11 -

1.2 Unpack your device ........................................................................................................ - 11 -

1.3 Communication port ....................................................................................................... - 11 -

1.4 LED indicator light......................................................................................................... - 12 -

1.5 Start-up, shutdown, standby and restart .......................................................................... - 12 -

1.6 Maintenance ................................................................................................................... - 12 -

1.7 Reading skills ................................................................................................................. - 13 -

2.System Setting ......................................................................................................................... - 14 -

2.1 Mark setting ................................................................................................................... - 14 -

2.2 Basic barcode setting ...................................................................................................... - 14 -

2.2.1 Pair receiver.......................................................................................................... - 14 -

2.2.2 Real-time mode .................................................................................................... - 15 -

2.2.3 Warehousing mode ............................................................................................... - 15 -

2.2.4 Initialization setting .............................................................................................. - 17 -

2.2.5 Read version information ...................................................................................... - 17 -

2.2.6 Time out setting .................................................................................................... - 17 -

-6-
2.3 Volume setting................................................................................................................ - 19 -

2.3.1 Volume setting ...................................................................................................... - 19 -

2.3.2 Buzzer frequency setting ....................................................................................... - 19 -

2.4 Language setting ............................................................................................................ - 19 -

2.5 Transmission speed setting ............................................................................................. - 21 -

2.6 Suffix setting .................................................................................................................. - 22 -

2.7 Add user-defined prefix/suffix ........................................................................................ - 22 -

2.8 Hide user-defined prefix/suffix ....................................................................................... - 23 -

2.9 Control character escape ................................................................................................. - 27 -

2.10 GS Character barcode setting........................................................................................ - 27 -

2.11 USB Keyboard case output control ............................................................................... - 28 -

2.12 Product user configuration ............................................................................................ - 28 -

2.13 Unicode Output Mode .................................................................................................. - 29 -

2.14 Scan mode .................................................................................................................... - 29 -

2.15 Repeated code detection ............................................................................................... - 30 -

2.16 Screen reading mode .................................................................................................... - 31 -

2.17 Center mode ................................................................................................................. - 31 -

2.19 Code ID output option setting ....................................................................................... - 32 -

2.20 AIM ID Barcode setting ............................................................................................... - 33 -

2.21 Inverse code option(for 1D barcode / DataMatrix/Aztec) .............................................. - 34 -

2.22 Symbologies ................................................................................................................. - 34 -

2.22.1 Enable/disable all symbologies ........................................................................... - 34 -

-7-
2.22.2 Enable/disable all 1D symbologies ...................................................................... - 35 -

2.22.3 Enable/disable all 2D symbologies ...................................................................... - 35 -

2.22.4 Codabar On/off setting ........................................................................................ - 36 -

2.22.5 Codabar Start/ending character setting ................................................................ - 36 -

2.22.6 Codabar Length limit setting ............................................................................... - 36 -

2.22.7 Code 39 Turn barcode on/off setting ................................................................... - 37 -

2.22.8 Code 39 Check bit setting ................................................................................... - 37 -

2.22.9 Code 39 Full ASCII On/off setting ...................................................................... - 38 -

2.22.10 Code 39 Length limit setting ............................................................................. - 39 -

2.22.11 Code 32 (need code39to open) Turn barcode on/off setting ............................... - 39 -

2.22.12 Interleaved 2 of 5(ITF25)Turn barcode on/off setting ........................................ - 39 -

2.22.13 Interleaved 2 of 5(ITF25)Check bit setting ........................................................ - 40 -

2.22.14 Interleaved 2 of 5(ITF25)Length selection setting ............................................. - 40 -

2.22.15 Interleaved 2 of 5 Length limit setting ............................................................... - 42 -

2.22.16 Industrial 2 of 59(Industry 25 code)Turn barcode on/off setting ........................ - 43 -

2.22.17 Industrial 2 of 5 Length limit setting ................................................................. - 43 -

2.22.18 Matrix 2 of 5(matrix 25 yards) (4-24 digits)Turn barcode on/off setting ............ - 44 -

2.22.19 Matrix 2 of 5 Length limit setting...................................................................... - 44 -

2.22.20 Code 93 Turn barcode on/off setting ................................................................. - 44 -

2.22.21 Code 93 Length limit setting ............................................................................. - 45 -

2.22.22 Code 11 Turn barcode on/off setting.................................................................. - 45 -

2.22.23 Code 11 Check bit output Turn barcode on/off setting ....................................... - 46 -

-8-
2.22.24 Code 11 Check selection setting ........................................................................ - 46 -

2.22.25 Code 11 Length limit setting ............................................................................. - 47 -

2.22.26 Code 128 Turn barcode on/off setting................................................................ - 47 -

2.22.27 GS1-128 Turn barcode on/off setting................................................................. - 47 -

2.22.28 128 code Length limit setting ............................................................................ - 48 -

2.22.29 UPC-A Turn barcode on/off setting ................................................................... - 48 -

2.22.30 UPC-A Check bit setting ................................................................................... - 49 -

2.22.31 UPC-A turn EAN-13 ......................................................................................... - 49 -

2.22.32 UPC-E Turn barcode on/off setting ................................................................... - 49 -

2.22.33 UPC-E Check bit .............................................................................................. - 50 -

2.22.34 UPC-E extend UPC-A ...................................................................................... - 50 -

2.22.35 EAN/JAN-8 Turn barcode on/off setting ........................................................... - 51 -

2.22.36 EAN/JAN-13 Turn barcode on/off setting ......................................................... - 51 -

2.22.37 UPC/EAN/JAN Additional code setting ............................................................ - 51 -

2.22.38 EAN13 turn ISBN............................................................................................. - 52 -

2.22.39 EAN13 turn ISSN ............................................................................................. - 52 -

2.22.40 GS1 DataBar（RSS14） .................................................................................. - 54 -

2.22.41 GS1 DataBar Limited........................................................................................ - 54 -

2.22.42 GS1 DataBar Expanded .................................................................................... - 54 -

2.22.43 PDF417 ............................................................................................................ - 55 -

2.22.44 QR Code ........................................................................................................... - 55 -

2.22.45 Micro QR.......................................................................................................... - 56 -

-9-
 2.22.46 Data Matrix....................................................................................................... - 56 -

2.22.47 Aztec Code ....................................................................................................... - 56 -

Appendix 1 Data and edit barcode............................................................................................... - 57 -

Appendix 2 prefix / suffix control character table ........................................................................ - 61 -

Appendix 3 prefix / suffix visible character table ........................................................................ - 62 -

Appendix 4 barcode type ID table ............................................................................................... - 66 -

Appendix 5 AIM ID table............................................................................................................ - 68 -

Appendix 6 Control character set (USB keyboard mode) (not enabled) ....................................... - 70 -

Some feature configuration instructions and examples ................................................................ - 72 -

- 10 -
 1.Product Introduction

In this chapter, we will introduce the instruction of scanner with pictures, please compare to the
scanner you bought when reading this user guide, which is good for your understanding. This chapter
applies to regular users, maintenance personnel, and software developers.

1.1 Main feature

* Support computer, mobile screen scanning

* Easy to operate and easy to master

* Rich decoding types

* Support invoice function

* Wired and wireless dual mode free switching

* Large-capacity storage, safe and reliable

*Exclusive power management system, long standby time

1.2 Unpack your device

Unpack and remove the product and its accessories. Check that all items are complete against the
packing list and determine if there are any damaged parts. If there are any damaged or missing parts,
please keep the original packaging and contact your supplier for after-sales service

1.3 Communication port

The product must be connected with a host before it can be operated and used.The host can be a
PC, a POS machine or a smart terminal with a USB interface.

- 11 -
 USB USB interface on the host

1.4 LED indicator light

Indicator status explain

red light on Charging
red light off No charging
green light on No decoding
green light off Decode successfully
one blue light on Pairing successful or connect to USB
two blue light twinkle alternately Bluetooth HID pair mode
1.5 Start-up, shutdown, standby and restart

Start-up：Connect host computer with scanner, which will automatically start-up and in working
state.

Shutdown：Remove the data cable which is connected with scanner; remove the USB which is
connected with host computer;

Restart：If the product crash or no response when pressing button, please restart it.

1.6 Maintenance

* The window must be kept clean, the supplier do not bear the guarantee responsibility due to the
improper maintenance.

* Avoid the window being wear and tear or scratched by hard object

* Use the hairbrush to remove the stain on the window

* Clean the window with a soft cloth, such as lens cleaning cloth

* Spraying liquid onto the window is prohibited.

* Prohibit any cleaning solvents, except for the cleaning water.

- 12 -
1.7 Reading skills

If the barcode is small, it should be closer to the scanning window; if the barcode is large, it
should be far away from the scanning window a little more, thus easier to be read correctly.

If the barcode is highly reflective (for example, the coated surface), you may need to tilt the
barcode at an angle to successfully scan it.

Barcode scanning example：

- 13 -
 2.System Setting

This product is mainly used to set options and functions by reading a series of special barcodes,in
this chapter,we'll detail the options and features available to users and provide the corresponding setup
code.This method of setting up scanning is relatively straightforward and easy to understand, and is
convenient for the user to operate.

2.1 Mark setting

Setting Mode 2

This is the mark for setting up the barcode function of the mode.The mark consists of
two parts:

1.Barcode section of setting code

2.Set the name of the option or function, such as the set function.

2.2 Basic barcode setting

2.2.1 Pair receiver

A: Press the button briefly to start the scanner, and the green indicator light will be on if
the scanner is started successfully

B: Scan the barcode below "enter pairing mode". After successfully entering pairing mode, the
Bluetooth indicator will flash

- 14 -
 Enter Pairing Mode

C:Connect the receiver to the computer or other devices, and the buzzer "beeps" once the
pairing is successful, and the blue indicator light will be always on

2.2.2 Real-time mode

In real-time mode, the scanned data is transmitted directly to the computer via wired or wireless,Aaer
the transmission is successful, the scanner will emit a low-frequency short tone and the green indicator
will flash once.

If the transmission fails, three low-frequency short tones are issued to warn, and the green light flashes
three times.

Enter Real-Time Mode (Default)

2.2.3 Warehousing mode

If the scanner works beyond the wireless transmission range, the storage mode is recommended.In
warehousing mode, the scanned data is stored in the scanner's internal storage.

In the storage mode, after scanning a bar code, the scanner will emit a short tone (the frequency is low

- 15 -
first and then high).At the same time, the green light flashes once and the scanned bar code is
automatically stored in the scanner.

Enter Warehousing Mode

View the number of barcodes stored in the warehouse by scanning the “Display total
warehouse entries” barcode.

Display Total Warehouse Entries

Upload warehousing data by scanning the “Data Upload” barcode,barcodes stored in the scanner
after data upload are not automatically deleted.The user uploads the warehousing data multiple times
by scanning the "data upload".

Data Upload

Note: Please try to ensure that the wireless signal connection is good when uploading data,or
upload with the data cable connected.

Clear barcode data in the warehouse by scanning the “Clear Warehousing Data” barcode.After
the barcode is cleared, it will not be uploaded again. Please confirm whether the data has been uploaded
before clearing.

- 16 -
 Clear Warehousing Data

2.2.4 Initialization setting

If you accidentally scan other function setting codes during use, resulting in the scanning function
not working properly, you can restore the initialization status by scanning the initialization bar code.

Restore Factory Settings

2.2.5 Read version information

Read Version Information

2.2.6 Time out setting

Select time out setting barcode

Time Out After 30S (Default)

- 17 -
 Time Out After 1min

Time Out After 5min

Time Out After 10min

Time Out After 30min

No Time Out

Time Out Immediately

- 18 -
 Display Battery

2.3 Volume setting

2.3.1 Volume setting

Low Volume
Mute

High Volume（Default）
Middle Volume

2.3.2 Buzzer frequency setting

2K

2.7K（Default）

2.4 Language setting

Select the language keyboard you need

- 19 -
 English (Default)

German

French

Spanish

Italian

Japanese

International General Keyboard

- 20 -
 French(Belgian)

2.5 Transmission speed setting

Select the required transmission speed (speed selection is related to reading barcode);

Fast Transmission

Medium Speed Transmission (Recommended For Use In IOS System Bluetooth Mode)

Low Speed Transmission (Recommended For Bluetooth Mode In Android)

Ultra Low Speed Transmission (Recommended Test Mode Used)

- 21 -
2.6 Suffix setting

Select the end you want to add;

<Data> <CR>

<Data> <LF>

<Data> <CR> <LF>(Default)

<Data> <\t>

Not S uffix

2.7 Add user-defined prefix/suffix

Method of adding prefix and suffix:First scan to add prefix or suffix, then scan the corresponding
barcode (see appendix), up to 32 bytes.
- 22 -
 Add Prefix

Add Suffix

2.8 Hide user-defined prefix/suffix

Method of hiding prefixes and suffixes:First scan the hidden prefix or suffix, then scan the
hidden bits, hiding up to 16 bytes.

Hidden Barcode Prefix

Hidden Barcode Suffix

- 23 -
Hide 1 bit

Hide 2 bits

Hide 3 bits

Hide 4 bits

Hide 5 bits

- 24 -
 Hide 6 bits

Hide 7 bits

Hide 8 bits

Hide 9 bits

Hide 10 bits

- 25 -
Hide 11 bits

Hide 12 bits

Hide 13 bits

Hide 14 bits

Hide 15 bits

- 26 -
 Hide 16 bits

2.9 Control character escape

Enable Control Character Escape

Disable Control Character Escape（Defaul

t）

2.10 GS Character barcode setting

Enable GS Symbol To Convert to |

Disable GS Symbol To | (Default)

- 27 -
2.11 USB Keyboard case output control

Force Conversion To Uppercase

Force Conversion To Lowercase

Case Interchange

No Case Conversion (Default)

2.12 Product user configuration

Scan the barcode bel ow to save the current parameter s of the product as a user
configuration.

Save User Configuration

Scan the barcode below to restore the product to a saved user configuration

- 28 -
 Restore User Configuration

2.13 Unicode Output Mode

In order to output correctly according to the specified encoding format, you need
to specify the output encoding format, such as Simplified Chinese in Notepad / excel
output configuration into GBK encoding.

When the output encoding format is configured as English/Latin-1 encoding,The

output mode under the USB keyboard is affected by the virtual keyboard function
switch.

When the output encoding format i s confi gured as GBK encoding / UNICODE
encoding,The output mode under the USB keyboard is forced to be the virtual
keyboard out put.

English/Latin-1 Encoding (Default)

GBK Coding (Notepad/ Excel)

2.14 Scan mode

This product has a self-inductive scan code mode.Scan the barcode below to configure the switch.

- 29 -
 When the self-sensing mode is configured to be off, pulled the trigger of the scanner to
decode.This mode is the default configuration.

Auto Sense Mode Off (Default)

When the self-sensing mode is configured to be on, the scanner can automatically sense the barcode

in front of the lens for decoding.。

Auto Sense Mode Turn On

2.15 Repeated code detection

In induction mode, it is used to configure the interval time for solving the same barcode.If the setup
time is not exceeded, the same barcode will only be solved once.

Repeat Code Detection Interval 500s

Repeat Code Detection Interval 750s(Default)

- 30 -
 Repeat Code Detection Interval 1s

Repeat Code Detection Interval 2s

2.16 Screen reading mode

When this mode is turned on, your scanner will be optimized to read the bar code displayed on
the display such as your phone or computer.However, turning this mode on may result in a slight
decrease in the speed at which the printed bar code is read.

Screen Reading Mode Off (Default)

Screen Reading Mode Turn On

2.17 Center mode

When the center mode is on, the scanner will only recognize the bar code located in the center of
the screen to which the scanner lens is facing.By default, this configuration is in a closed state.

- 31 -
 Central Mode Off (Default)

Central Mode Turn On

2.19 Code ID output option setting

Turn Off CODE ID (Default)

Open Barcode Front CODE ID

Open Barcode Latter CODE ID

Edit:

- 32 -
 Custom CODE ID

(Please follow the barcode type ID table and data and edit barcode in the appendix
after scanning)

Clear All Custom CODE ID

2.20 AIM ID Barcode setting

Turn Off Barcode AIM ID (Default)

Open Barcode Front AIM ID

Open Barcode Latter AIM ID

- 33 -
2.21 Inverse code option(for 1D barcode / DataMatrix/Aztec)

Only Decode Normal Code（Default）

Only Decode Inverse Code

2.22 Symbologies Decode Both Normal Code And Inverse Code

2.22.1 Enable/disable all symbologies

Opening all bar code types may result in slower decoding speed. It is recommended to
open the required bar code type according to the usage scenario.The default is to turn on all bar
codes

Enable Al l Symbologies(Default)

- 34 -
 Disable All Symbologies

2.22.2 Enable/disable all 1D symbologies

Enable All 1D Symbologies

Disable All 1D Symbologies

2.22.3 Enable/disable all 2D symbologies

Enable All 2D Symbologies

Disable All 2D Symbologies

- 35 -
2.22.4 Codabar On/off setting

Codabar Turn On

Codabar Turn Off

2.22.5 Codabar Start/ending character setting

Do Not Send Codabar Start/end Characters (Default)

Send Codabar Start/End Characters

2.22.6 Codabar Length limit setting

Codabar Minimum Length Limit (0~50 bits)

- 36 -
 Codabar Maximum Length Limit (0~50 bits)

2.22.7 Code 39 Turn barcode on/off setting

Code 39 Turn On

Code 39 Turn Off

2.22.8 Code 39 Check bit setting

Code 39 Check Off (Default)

- 37 -
 Code 39 Check Open Does Not Send Check Bit

Code 39 Check Open Send Check Bit

2.22.9 Code 39 Full ASCII On/off setting

Full ASCII Turn On

Full ASCII Turn Off(Default)

- 38 -
2.22.10 Code 39 Length limit setting

Code 39 Minimum Length Limit (0~50 bits)

Code 39 Maximum Length Limit (0~50 bits)

2.22.11 Code 32 (need code39to open) Turn barcode on/off setting

Code 32 Turn On

Code 32 Turn Off

2.22.12 Interleaved 2 of 5(ITF25)Turn barcode on/off setting

ITF25 Turn On
- 39 -
 ITF25 Turn Off

2.22.13 Interleaved 2 of 5(ITF25)Check bit setting

ITF25 Check Off (Default)

ITF25 Check Open Does Not Send Check Bit

ITF25 Check Open Send Check Bit

2.22.14 Interleaved 2 of 5(ITF25)Length selection setting

ITF25 Any Length (4-24 bits) (Default)

- 40 -
 ITF25 6-bit Length

ITF25 8-bit Length

ITF25 10-bit Length

12-bit Length

ITF25 14-bit Length

- 41 -
 ITF25 16-bit Length

ITF25 18-bit Length

ITF25 20-bit Length

ITF25 22-bit Length

ITF25 24-bit Length

2.22.15 Interleaved 2 of 5 Length limit setting

Interleaved
- 42 - 2 of 5 Minimum Length Limit (0~50 bits)
 Interleaved 2 of 5 Maximum Length Limit (0~50 bits)

2.22.16 Industrial 2 of 59(Industry 25 code)Turn barcode on/off setting

Industrial 2 of 5 Turn On

Industrial 2 of 5 Turn Off

2.22.17 Industrial 2 of 5 Length limit setting

Industrial 2 of 5 Minimum Length Limit (0~50 bits)

Industrial 2 of 5 Maximum Length Limit (0~50 bits)

- 43 -
2.22.18 Matrix 2 of 5(matrix 25 yards) (4-24 digits)Turn barcode on/off setting

Matrix 2 of 5 Turn On

Matrix 2 of 5 Turn Off

2.22.19 Matrix 2 of 5 Length limit setting

Matrix 2 of 5 Minimum Length Limit (0~50 bits)

Matrix 2 of 5 Maximum Length Limit (0~50 bits)

2.22.20 Code 93 Turn barcode on/off setting

Code 93 Turn On

- 44 -
 Code 93 Turn Off

2.22.21 Code 93 Length limit setting

Code 93 Minimum Length Limit (0~50 bits)

Code 93 Maximum Length Limit (0~50 bits)

2.22.22 Code 11 Turn barcode on/off setting

Code 11 Turn On

Code 11 Turn Off(Default)

- 45 -
2.22.23 Code 11 Check bit output Turn barcode on/off setting

Code 11 Check Digit Output Turn On

Code 11 Check Digit Output Turn Off (Default)

2.22.24 Code 11 Check selection setting

Code 11 Check Off (Default)

Code 11 1 bit Check

Code 11 2bit Check

- 46 -
2.22.25 Code 11 Length limit setting

Code 11 Minimum Length Limit (0-50 bits)

Maximum Length Limit (0-50 bits)

2.22.26 Code 128 Turn barcode on/off setting

Code 128 Turn On

Code 128 Turn Off

2.22.27 GS1-128 Turn barcode on/off setting

GS1-128 Turn On

- 47 -
 GS1-128 Turn Off

2.22.28 128 code Length limit setting

128 Code Minimum Length Limit (0-50 bits)

128 code Maximum Length Limit (0-50 bits)

2.22.29 UPC-A Turn barcode on/off setting

UPC-A Turn On

UPC-A Turn Off

- 48 -
2.22.30 UPC-A Check bit setting

Send UPC-A Check Bits (Default)

Do Not Send UPC-A Check Bits

2.22.31 UPC-A turn EAN-13

UPC-A Turn EAN-13 Turn On

UPC-A Turn EAN-13 Turn Off

2.22.32 UPC-E Turn barcode on/off setting

- 49 -
 UPC-E Turn On

UPC-E Turn Off

2.22.33 UPC-E Check bit

Send UPC-E Check Bits (Default)

Do Not Send UPC-E Check Bits

2.22.34 UPC-E extend UPC-A

UPC-E Extend UPC-A Turn On

UPC-E Extend UPC-A Turn Off (Default)

- 50 -
2.22.35 EAN/JAN-8 Turn barcode on/off setting

EAN/JAN-8 Turn On

EAN/JAN-8 Turn Off

2.22.36 EAN/JAN-13 Turn barcode on/off setting

EAN/JAN-13 Turn On

EAN/JAN-13 Turn Off

2.22.37 UPC/EAN/JAN Additional code setting

Ignore UPC/EAN/JAN Add-On Code (Default)

- 51 -
 Decode UPC/EAN/JAN Add-On Code

Adaptive UPC/EAN/JAN add-on code

2.22.38 EAN13 turn ISBN

Turn On EAN13 To ISBN Code

Turn Off EAN13 To ISBN Code (Default)）

2.22.39 EAN13 turn ISSN

Turn On EAN13 To ISSN Code

- 52 -
 Turn Off EAN13 To ISSN Code(Default)

- 53 -
2.22.40 GS1 DataBar（RSS14）

GS1 DataBar Turn On

GS1 DataBar Turn Off

2.22.41 GS1 DataBar Limited

GS1 DataBar Limited Turn On

GS1 DataBar Limited Turn Off

2.22.42 GS1 DataBar Expanded

GS1 DataBar Expanded Turn On

- 54 -
 GS1 DataBar Expanded Turn Off

2.22.43 PDF417

PDF417 Turn On

PDF417 Turn Off

2.22.44 QR Code

QR Turn On

QR Turn Off

- 55 -
2.22.45 Micro QR

Micro QR Turn On

Micro QR Turn off

2.22.46 Data Matrix

Data Matrix Turn On

Data Matrix Turn Off

2.22.47 Aztec Code

Aztec Turn On

Aztec turn off

- 56 -
 Appendix 1 Data and edit barcode

- 57 -
6

- 58 -
 C

Cancel Current Setting

- 59 -
 Cancel A String Of Data Read Before

Cancel The Previous Read Data

Save

- 60 -
 Appendix 2 prefix / suffix control character table

No. Disable Enable Setting barcode No. Disable Enable Setting barcode
control control control control
1 Insert
character Ctrl+A
character 17 ↑
characte Ctrl+Q
character
r
2 Home Ctrl+B 18 ↓ Ctrl+R

3 End Ctrl+C 19 ← Ctrl+S

4 Delete Ctrl+D 20 → Ctrl+T

5 PageUp Ctrl+E 21 F12 Ctrl+U

6 PageDown Ctrl+F 22 F1 Ctrl+V

7 ESC Ctrl+G 23 F2 Ctrl+W

8 Backspace Ctrl+H 24 F3 Ctrl+X

9 Tab Ctrl+I 25 F4 Ctrl+Y

10 Enter Enter 26 F5 Ctrl+Z

11 Caps Lock Ctrl+K 27 F6 Ctrl+[

12 Print Screen Ctrl+L 28 FS Ctrl+\

13 Enter Ctrl+M 29 GS Ctrl+]

14 F7 Ctrl+N 30 F9 Ctrl+^

15 F8 Ctrl+O 31 F10 Ctrl+_

16 F11 Ctrl+P

- 61 -
 Appendix 3 prefix / suffix visible character table

visible visible
NO. Setting barcode NO. Setting barcode
character character

32 space 44 ,

33 ! 45 -

34 " 46 .

35 # 47 /

36 $ 48 0

37 % 49 1

38 & 50 2

39 ' 51 3

40 ( 52 4

41 ) 53 5

42 * 54 6

- 62 -
43 + 55 7

56 8 70 F

57 9 71 G

58 : 72 H

59 ; 73 I

60 < 74 J

61 = 75 K

62 > 76 L

63 ? 77 M

64 @ 78 N

65 A 79 O

66 B 80 P

67 C 81 Q

- 63 -
68 D 82 R

69 E 83 S

84 T 98 b

85 U 99 c

86 V 100 d

87 W 101 e

88 X 102 f

89 Y 103 g

90 Z 104 h

91 [ 105 i

92 \ 106 j

93 ] 107 k

94 ^ 108 l

- 64 -
95 _ 109 m

96 ` 110 n

97 a 111 o

112 p 120 x

113 q 121 y

114 r 122 z

115 s 123 {

116 t 124 |

117 u 125 }

118 v 126 ~

119 w 127 DEL

- 65 -
 Appendix 4 barcode type ID table

Code type HEX CODE ID(default)

All code type 99

Codabar 61 a

Code128 6A j

Code32 3C <

Code93 69 i

Code39 62 b

Code11 48 H

EAN-13 64 d

EAN-8 64 d

GS1 DataBar 79 y

GS1-128 (EAN-128) 6A j

2 of 5

Interleaved 2 of 5 65 e

Matrix 2 of 5 76 v

Industry 2 of 5 44 D

UPC-A 63 c

UPC-E 63 c

ISBN 42 B

ISSN 6E n

- 66 -
Aztec Code 7A z

DataMatrix 75 u

PDF417 72 r

Micro PDF417 53 S

QR Code 51 Q

Micro QR Code 51 Q

- 67 -
 Appendix 5 AIM ID table

Code type AIM ID Explain

Codabar ]Fm m：0~1

Code128 ]C0 m：0，1，2，4

Code32 ]A0

Code93 ]G0

Code39 ]Am m：0，1，3，4，5，7

Code11 ]Hm m：0，1，3，8，9

EAN-13 / EAN-8 ]Em m：0，1，3，4

GS1 DataBar ]e0

GS1-128 (EAN-128) ]C1

Interleaved 2 of 5 ]Im m：0，1，3

Matrix 2 of 5 ]X0

Industry 2 of 5 ]S0

UPC-A/ UPC-E ]Em m：0，3

ISBN ]X0

ISSN ]X0

Aztec Code ]z0

DataMatrix ]dm m: 0~6

PDF417 / Micro PDF417 ]Lm m: 0~5

- 68 -
QR Code / Micro QR Code ]Qm m: 0~6

- 69 -
 Appendix 6 Control character set (USB keyboard mode) (not enabled)

Corresponding key value

Corresponding key value (control
Decimal Hex (control character escaping
character escaping off)
on)

1 01 Insert Ctrl+A

2 02 Home Ctrl+B

3 03 End Ctrl+C

4 04 Delete Ctrl+D

5 05 PageUp Ctrl+E

6 06 PageDown Ctrl+F

7 07 ESC Ctrl+G

8 08 Backspace Ctrl+H

9 09 Tab Ctrl+I

Enter (performance is affected by

10 0A carriage return line feed processing Enter
configuration)

11 0B Caps Lock Ctrl+K

12 0C Print Screen Ctrl+L

Enter (performance is affected by

13 0D carriage return line feed processing Ctrl+M
configuration)

14 0E F7 Ctrl+N

15 0F F8 Ctrl+O

- 70 -
16 10 F11 Ctrl+P

17 11 Direction key ↑ Ctrl+Q

18 12 Direction key ↓ Ctrl+R

19 13 Direction key ← Ctrl+S

20 14 Direction key → Ctrl+T

21 15 F12 Ctrl+U

22 16 F1 Ctrl+V

23 17 F2 Ctrl+W

24 18 F3 Ctrl+X

25 19 F4 Ctrl+Y

26 1A F5 Ctrl+Z

27 1B F6 Ctrl+[

28 1C <FS> Ctrl+\

29 1D <GS> Ctrl+]

30 1E F9 Ctrl+^

31 1F F10 Ctrl+_

- 71 -
 Some feature configuration instructions and examples

Barcode length limit configuration example

When configuring the barcode minimum length limit, you must ensure that the configured
minimum length is not greater than the current maximum length configuration,otherwise, errors will
be prompted.Similarly, when configuring the barcode maximum length limit, you must also ensure
that the maximum length of the configuration is not less than the current minimum length configuration.

Example 2.1: Configuring Code 128 barcode length is 4-12 bits

Scan configuration code Code 128 minimum length limit,then scan the appendix data and edit the 4

in the barcode, save；

Scan configuration code Code 128 maximum length limit,then scan the appendix data and edit the

1,2 in the bar code, save；That is, the configuration is completed.

Example 2.2: Configure Interleaved 2 of 5 barcode length to 14 bits

Configure Interleaved 2 of 5 barcode length 14 bits to directly scan the quick configuration barcode
ITF25 14-bit length configuration,or configure it with the maximum and minimum length of barcodes:

Scan configuration code Interleaved 2 of 5 minimum length limit,then scan the appendix data and

edit the 1,4 in the barcode, save；

Scan configuration code Interleaved 2 of 5 maximum length limit,then scan the appendix data and
edit the 1,4 in the barcode, save;That is, the configuration is completed.

Example 2.3: Configuring Code 39 barcode length to any length supported

Scan configuration code Code 39 minimum length limit,then scan the appendix data and edit the 0

in the barcode, save；

- 72 -
Scan configuration code Code 39 maximum length limit,then scan the appendix data and edit the 0
in the barcode, save;That is, the configuration is completed.

- 73 -