USSR STATE STANDARD

MEN'S SUITS FOR PROTECTION FROM

GENERAL INDUSTRIAL POLLUTION AND
MECHANICAL EFFECTS
SPECIFICATIONS

GOST 27575-87

Official Edition

USSR STATE COMMITTEE FOR STANDARDS

Moscow

--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 UDC 687.157:006.354 Group M 38
USSR STATE STANDARD

MEN’S SUITS FOR PROTECTION FROM GENERAL

INDUSTRIAL POLLUTION AND MECHANICAL GOST
EFFECTS 27575-87
Specifications

OKP (All-Union Product Classification Code) 85 7211

Term from 01.01.90

to 01.01.95

Failure to comply with this Standard will result in legal proceedings

This Standard applies to men's suits consisting of a jacket and trousers or bib-and-brace
overalls, used as coveralls for protecting workers of various industries from general industrial
pollution and mechanical effects.

1. TECHNICAL REQUIREMENTS
1.1. Suits shall be produced according to the requirements of this Standard, the industrial
methods of producing coveralls, the Unified Industrial Collection of models of men's suits for
protection against general industrial pollution and mechanical effects, the standard samples
and the model descriptions approved in accordance with the established procedure.
1.2. Key par amet ers and sizes
1.2.1. Sizes of suits shall correspond to the height and chest circumference values of the
standard human figure specified in tables 1 and 2.
--````,-`-`,,`,,`,`,,`---

Official Edition Reprinting is prohibited

!
© Standards Publishing House, 1988

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 2 GOST 27575-87

Table 1
Size, cm

Standard human figure height Height intervals

158, 164 from 155 to 167 inclusive

170, 176 from 167 to 179 inclusive
182, 188 from 179 to 191 inclusive
Table 2
Size, cm

Standard human figure chest circumference Chest circumference intervals

88, 92 from 86 to 94 inclusive

96, 100 from 94 to 102 inclusive
104, 108 from 102 to 110 inclusive
112, 116 from 110 to 118 inclusive
120, 124 from 118 to 126 inclusive
Not e t o t a bl e s 1 a n d 2. Suits of sizes smaller than 88, 92 cm in chest circumference and 158, 164 cm in
height of the standard figure and larger than 120, 124 cm in chest circumference and 182, 188 cm in height of
the standard figure shall be produced at the customer's request.
1.2.2. The measurement values of finished suits shall meet those specified in table 3 and in
figures 1 to 4.
Table 3
cm
measurement on

Standard human figure chest circumference

the drawing

Permissible
Number of

deviation
Standard
Measurement human figure
88, 96, 104, 112, 120,
height
92 100 108 116 124

Jacket (figures 1, 2)
1 Back length: without 158, 164 72.0 72.0 72.0 72.0 72.0
waistband 170, 176 76.0 76.0 76.0 76.0 76.0 ±1.0
182, 188 80.0 80.0 80.0 80.0 80.0
with stitched 158, 164 64.0 64.0 64.0 64.0 64.0
waistband 170, 176 68.0 68.0 68.0 68.0 68.0 ±1.0
182, 188 72.0 72.0 72.0 72.0 72.0
2 Jacket width at the
level of armhole
– 60.0 64.0 68.0 72.0 76.0 ±1.0
depth (lapel 3.0 cm
wide)
--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 3

Table 3 (cont.)
cm
measurement on

Standard human figure chest

the drawing

Permissible
Number of

Standard circumference

deviation
human
Measurement
figure
88, 96, 104, 112, 120,
height
92 100 108 116 124

3 Sleeve and shoulder seam 158, 164 77.0 77.8 78.6 79.4 80.2
length (from collar stitch- 170, 176 81.2 82.0 82.8 83.6 84.4 ±1.0
in seam to sleeve bottom) 182, 188 85.4 86.2 87.0 87.8 88.6
4 Collar length – 45.0 47.0 49.0 51.0 53.0 ±1.0
5 Jacket width below:
without waistband (lapel
– 56.0 60.0 64.0 68.0 72.0 ±1.0
3.0 cm wide)
with stitched waistband
– 54.0 58.0 62.0 66.0 70.0 ±1.0
(lapel 3.0 cm wide)

Trousers and bib-and-brace overalls (figures 3 and 4)

1 Side seam length 158, 164 94.0 94.0 94.0 94.0 94.0
170, 176 103.0 103.0 103.0 103.0 103.0 ±1.0
182, 188 112.0 112.0 112.0 112.0 112.0
2 Instep seam length 158, 164 71.2 70.2 69.2 68.2 67.2
170, 176 78.0 77.0 76.0 75.0 74.0 ±1.0
182, 188 84.8 83.8 82.8 81.8 80.8
3 Waistline width - 41.0 45.0 49.0 53.0 57.0 ±1.0
4 Seat seam level width - 33.5 35.5 37.5 39.5 41.5 ±1.0

Note. At the customer's request and by agreement with the appropriate Trade Union Central Committee,
measurement 3 values may be changed as follows:
in jackets: increased or reduced by no more than 2.0 cm for raglan sleeves;
in trousers and bib-and-brace overalls: reduced by no more than 2.0 cm.

--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 --````,-`-`,,`,,`,`,,`--- p. 4 GOST 27575-87

Fig 1

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 5

Fig 2
--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 6 GOST 27575-87

--````,-`-`,,`,,`,`,,`---
Fig 3

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 7

Fig 4

--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 8 GOST 27575-87

1.3. Charact er ist ics

1.3.1. The design of suits shall comply with the effective base designs of men's coveralls.
1.3.2. Suits may be manufactured according to models not stipulated by the United
Industrial Collection of models of men's suits at the customer's request and by agreement with
the appropriate Trade Union Central Committee.
1.3.3. Depending on manufacturing conditions and by agreement between the
manufacturer and the customer, suits of the following modifications may be produced:
with or without various types, dimensions, quantity and location of reinforcing patch
pieces and air holes;
complete with an additional trouser belt made from the basic fabric;
complete with headgear;
as separate articles.
1.3.4. Suits shall be produced from the materials listed in table 4.
Table 4

--````,-`-`,,`,,`,`,,`---
Specifications and technical
Material Purpose of material
documentation
1. Kapron fiber uniformly dyed fabric GOST 11209-85 For manufacturing suits
with BO No.3 finish
2. Melange fabric (dyed cotton and GOST 11209-85 As above
kapron fiber mix) with BO No.5 finish
3. Uniformly dyed suit fabric with GOST 11209-85 As above
BO, BO- У. З No.6 finish
4. “Dozor” uniformly dyed cotton- GOST 11209-85 As above
polyester fabric with BO No.14 finish
5. “Stradniex” cotton fabric No.15 GOST 11209-85 As above
6. Uniformly dyed suit fabric З No.18 GOST 11209-85 As above
7. Cotton-lavsan melange mercerized GOST 12239-76 As above
suit fabric No.1
8. Cotton-polyester melange GOST 12239-76 As above
mercerized suit fabric No. 30
9. “Kolos” cotton-polyester melange GOST 12289-76 As above
tricot No. 40

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 9

Table 4 (cont.)
Specifications and technical
Material Purpose of material
documentation
10. “Voskhod”, mercerized cotton TU 17 Kaz.SSR 01-433-84 For manufacturing suits
fabric article 3238
11. Uniformly dyed mercerized serge TU 17 RSFSR 66-6073-81 As above
with antishrink finish, article 3224
12. Uniformly dyed clothing cotton TU 17 RSFSR 60-10415-82 As above
serge, article 3227
13. Uniformly dyed cotton fabric, TU 17 RSFSR 52-10688-85 As above
article 3703
14. Mercerized coat serge with TU 17 RSFSR 60-8552-81 As above
antishrink finish, article 3202
15. Lavsan-viscose fabric for TU 17 УССР 3689-83 As above
coveralls with oil-repellant impregnation,
article 8605.7
16. Viscose - polyester fabric for TU 17 RSFSR 62-11045-85 As above
coveralls with oil-repellant impregnation
finish, article 86067, 86074
17. Cotton fabric article 3019 TU 17 Latv.SSR 1042-82 As above
18. Uniformly dyed moleskin, З GOST 11209-85 As above
No.19
19. Uniformly dyed suit fabric with GOST 11209-85 As above
finish BO No 4
--````,-`-`,,`,,`,`,,`---

20. Uniformly dyed cotton-polyester GOST1.1209-85 As above

fabric, З No. 21
21. Uniformly dyed suit fabric with TU 17 RSFSR 66-10449-82 As above
BO and without BO impregnation, article
3199
22. Uniformly dyed baize GOST 11680-76 For suit finishings
53. Uniformly dyed baize TU 17 RSFSR 60-10724-84 As above
24. Uniformly dyed baize TU 17 Kaz.SSR 01-385-80 As above, except for State
Order articles
25. Uniformly dyed baize TU 17 Gr.SSR 122-83 As above

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 10 GOST 27575-87

Table 4 (cont.)
Specifications and technical
Material Purpose of material
documentation
26. Uniformly dyed pocket GOST 7896-76 For suit finishings
material
27. Inkle 8 to 12 mm wide OST 17-591-86 For jacket fastenings (two rows)
28. Garter elastic tape 20 OST 17-284-73 For jacket fastenings (one row) and
to 24 mm wide adjusting braces of bib-and-brace
overalls (two rows)
29. Garter elastic tape 32 OST17-284-73 For adjusting braces of bib-and-brace
to 38 mm wide overalls
30. Five-sided buckles OST 17- 802-81 For fixing and adjusting braces of bib-
and-brace overalls
31. Eyelet rings OST 17-192-78 As above
32. Riveted buttons OST 17-699-83 For fastening jacket, trousers and bib-
and-brace overalls
33. Hooks and eyes OST 17-165-79 For fastening trousers and short overalls
34. Metal zipper OST 17-31-88 As above
35. Plastic zipper OST 17-891-86 As above
36. Buttons 17 to 23 mm in OST 17-699-83 For fastening jacket, belt of trousers and
diameter bib-and-brace overalls
37. Buttons 14 to 17 mm in OST 17-699-83 For fastening fly of trousers and bib-
diameter and-brace overalls
38. Plastic (aminoplast) OST 17-699-83 For fastening jacket, trousers and bib-
buttons and-brace overalls made by State Order

--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 11

Table 4 (cont.)
Specifications and technical
Material Purpose of material
documentation
39. Cotton sewing thread GOST 6309-87 For manufacturing suits
Rн 68.6 tex (30/6)
Rн 53.0 tex (40/6)
40. Reinforced sewing thread Rн OST 17-921-82 As above
45.0 tex (44 ЛХ -1)
41. Reinforced sewing thread Rн TU 17 RSFSR 63-11255-86 As above
35.0 tex (36 ЛХ)
42. Lavsan sewing thread OST 17-257-84 As above
Rн 62.0 tex (55 Л)
Rн 37.5 tex (33 Л)
43. Kapron sewing thread Rн 50.0 TU 17-1371- -84 As above
tex (50 K) TU 17 RSFSR 62-10645-83
44. Cotton sewing thread GOST 6309-87 For whipping cuts
Rн 50.0 tex ((40/3)
Rн 39.4 tex (50/3)
45. Cotton yarn GOST 9092-81 As above
Rн 30.8-50.0 tex
(No. 64,9/2; No. 54/2; No. 40/2)

--````,-`-`,,`,,`,`,,`---
Notes:
1. By agreement of the manufacturer with the customer and the Central Committee of the appropriate Trade
Union, materials and other accessories not inferior in quality to those specified in table 4 may be used.
2. Accessories shall be resistant to dry-cleaning and heat treatment.
3. The materials listed in clauses 20 and 21 shall be used for manufacturing suits until 01.01.91.
1.3.5. When manufacturing suits, basic material or ribbon shall be used for finishing the
upper edges of pockets and for hangers; basic material or corsage tape shall be used for lining
waistband of trousers or bib-and-brace overalls.
1.3.6. The classification and types of stitches, stitch-lines and seams employed in
manufacturing suits shall comply with GOST 12807-79.
The requirements for stitches, stitch-lines and seams shall comply with GOST 12.4.116-
82.
1.3.7. Definition of grades of finished suits shall comply with GOST 12.4.031-84.

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 12 GOST 27575-87

1.4. Marking
The marking of suits shall comply with GOST 10581-82 and GOST 12.4.115-82; the
marking of suits made by State Order shall comply with GOST 19159-85.
1.5. Packing
The packing of suits shall comply with GOST 10581-82; the packing of suits made by
State Order shall comply with GOST 19159-85.
--````,-`-`,,`,,`,`,,`---

2. ACCEPTANCE PROCEDURES
Acceptance procedures of suits shall comply with GOST 23948-80.

3. QUALITY MONITORING METHODS

Monitoring the quality of suits shall comply with GOST 4103-82.

4. TRANSPORTATION AND STORAGE

The transportation and storage of suits shall comply with GOST 10581-82 and with GOST
19159-85 for suits made by State Order.

5. USAGE INSTRUCTIONS
Dry-cleaning of suits shall comply with GOST 12.4.169-85.

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 GOST 27575-87 p. 13

DETAILS

1. DEVELOPED AND SUBMITTED by the USSR Ministry for Light Industry

DEVELOPERS
Z. C. Chubarova, Cand. Sci (Tech.) (Project Head); T. N. Kochegura, Cand. Sci (Tech.);
Z. D. Repina, I. G. Druz
2. APPROVED AND INTRODUCED by Decree No. 5088, dated 29.12.87, of the USSR
State Committee for Standards
3. IN PLACE OF GOST 12.4.109-82
4. REFERENCE DOCUMENTS

Number of reference document referred to Number of clause, section

GOST 12.4.031–84 1.3.7

GOST 12.4.115–82 1.4
GOST 12.4.116–82 1.3.6
GOST 12.4.169–85 Section 5
GOST 4103–82 Section 3
GOST 6309–87 1.3.4
GOST 7896–76 1.3.4
GOST 9092–81 1.3.4
GOST 10581–82 1.4, 1.5,
Section 4
GOST 11209–85 1.3.4
GOST 11680–76 1.3.4
GOST 12239–76 1.3.4
GOST 12807–79 1.3.6
GOST 19159–85 1.4, 1.5,
Section 4
GOST 23948–80 Section 2
OST 17–31–83 1.3.4
OST 17–165–79 1.3.4
OST 17–192–78 1.3.4
--````,-`-`,,`,,`,`,,`---

OST 17–257–84 1.3.4

OST 17–284–73 1.3.4
OST 17–591–86 1.3.4
OST 17–598–81 1.3.4
OST 17–602–81 1.3.4
OST 17–699–83 1.3.4
OST 17–891–86 1.3.4
OST 17–921–82 1.3.4
TU 17–1371–84 1.3.4

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale
 p. 14 GOST 27575-87

Number of reference document referred to Number of clause, Section

TU 17 60–9764–80 1.3.4
TU 17 RSFSR 45–9758–80 1.3.4
TU 17 RSFSR 52–10888–85 1.3.4
TU 17 RSFSR 60–8552–81 1.3.4
TU 17 RSFSR 60–10415–82 1.3.4
TU 17 RSFSR 60–10724–84 1.3.4
TU 17 RSFSR 62–10645–83 1.3.4
TU 17 RSFSR 62–10876–84 1.3.4
TU 17 RSFSR 62–11045–85 1.3.4
TU 17 RSFSR 63–11255–86 1.3.4
TU 17 RSFSR 66–6073–81 1.3,4
TU 17 RSFSR 66–11049–85 1.3.4
TU 17 RSFSR 8021–75 1.3.4
TU 17 Ukr.SSR 3689–83 1.3.4
TU 17 Kaz.SSR 01–385–80 1.3.4
TU 17 Kaz.SSR 01–433–84 1.3.4
TU 17 Gr.SSR 122–83 1.3.4

Editor L. A. Zimovnova
Technical Editor I. N. Dubina
Proof-reader A. I. Zyuban

--````,-`-`,,`,,`,`,,`---

Provided by IHS
No reproduction or networking permitted without license from IHS Not for Resale