Fosroc Nitotile XS Grout constructive solutions
Polymer modified, anti bacterial cementitious grout
Uses Instructions for use
As a grout for tile joints in: Preparation
Kitchens All tiles must be securely fixed in place and thoroughly
cleaned before Nitotile XS Grout is applied. The gap
Bathrooms
between tiles should not exceed 6 mm.
Shower stalls
Mixing
Swimming pools
A slow speed drill fitted with Fosroc Mixing Paddle MR4 and
a mixing vessel of minimum 20 litre capacity are recom-
Advantages
mended.
Low cost service life-mould resistant, tropical grade suits
Measure out 6 litres of clean water into the mixing vessel,
Middle East working conditions
add the powder component to the mix and continue mixing
Easy to apply - thixotropic, non-slump grout for 2 to 3 minutes until a uniform, lump-free consistency is
achieved. Allow to stand for 10 minutes prior to use.
Water resistant - can be used in submerged conditions
Application
Resists bacterial growth
Apply Nitotile XS Grout to the spaces between the tiles using
Available in a range of attractive colours
a sponge or a small piece of soft cloth. Work the mixture into
the joints and around the edges.
Description
Remove surplus material from the face of the tiles with a dry
Nitotile XS Grout is supplied as a one component pack, which
cloth and run the tip of a gloved finger or suitable rounded
requires only the on-site addition of clean water. It readily
tool along the grout to level it off and form a profile.
blends to produce a smooth creamy paste which, when set, is
water and mould resistant. Nitotile XS Grout is used in con- When the grout is dry, clean the tiles with a damp sponge to
junction with Nitotile tile adhesives. remove any excess material. It is advisable to remove
uncured grout from textured tiles prior to setting, failure to do
Standard Compliance so may result in difficulty in removal.
Complies with the European standard EN13888, of tile grouts. Cleaning
Properties Nitotile XS Grout should be removed from tools, equipment
and mixers with clean water immediately after use. Cured
Density : 1600kg/m3 material can only be removed mechanically.
Flexural strength
(EN 12808-3)
28 d sc : >6 N/mm2
Compressive strength
(EN 12808-3)
28 d sc : >22 N/mm²
Shrinkage after 28 d sc : < 2 mm/m
Water absorption
(EN 12805-5)
30mins : < 3g
240 mins : < 5g
Resistance to Fungi/Mould : Resists growth of Fungi/
(ASTM G21) Mould
Bacterial growth : Resistance to range of
Nitotile XS Grout
Bacteria
Fosroc Nitotile XS Grout
Limitations Precautions
Nitotile XS Grout should not be used when the temperature Health and safety
is below 5°C and falling. The product should not be exposed
Nitotile XS Grout is cement based. Care should be taken to
to moving water during application. If any doubts arise
avoid inhalation of dust and contact with eyes. All cement
concerning temperature or substrate conditions, consult your
based products, when mixed or damp release alkalis which
local Fosroc office.
can be harmful to the skin.
Certain types of tiles, particularly natural stones are porous
Additional Information
in nature and therefore may discolour after grouting; compat-
ibility of grouting materials with the tiles should always be Nitotile XS Grout is part of a range of Fosroc tile adhesives
confirmed with a trial area. and tile grouts.
Fosroc manufactures a wide range of complementary
Estimating
products which include:
Supply
Nitotile XS Grout powder : 20 kg bags Waterproofing membranes & waterstops
Yield Joint sealants & filler boards
Nitotile XS Grout : 16 ltrs per bag Cementitious & epoxy grouts
Storage Specialised flooring materials
Shelf life Fosroc additionally offers a comprehensive package of
products specifically designed for the repair and refurbish-
Nitotile XS Grout has a shelf life of 12 months if kept in a dry ment of damaged concrete. Fosroc’s ‘Systematic Approach’
store in the original, unopened bags or packs. to concrete repair features the following:
Storage conditions Hand-placed repair mortars
Store in dry conditions in the original, unopened bags or packs. Spray grade repair mortars
If stored at high temperature and / or high humidity conditions
the shelf life may be reduced to 4 to 6 months. Fluid micro-concretes
Chemically resistant epoxy mortars
Technical support
Fosroc offers a comprehensive range of high performance, Anti-carbonation/anti-chloride protective coatings
high quality repair, maintenance and construction products. Chemical and abrasion resistant coatings
In addition, Fosroc offers a technical support package to
specifiers, end-users and contractors, as well as on-site For further information on any of the above, please consult
technical assistance in locations all over the world. your local Fosroc office - as below.
* Denotes the trademark of Fosroc International Limited
†
See separate data sheet
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Fosroc Chemtech Head Office Alex. Branch
6th of October City, 3rd Industrial Zone, Arab Republic of Egypt. 156 Port-Said St. Al-Ibrahimeya, Kesm Bab
Construction Chemicals
Tel: (02) 38242045 / (02) 38242046 Shark-No.5,1st floor.
Fax: (02) 38242098 Tel: (03) 5925264
E-mail: Egypt@Fosroc.com
EG/0551/21/A
