Scribd
Upload
28 views2 pages

kvr1066d3s7 2g

The document outlines the specifications for ValueRAM's 2GB DDR3-1066 CL7 SDRAM memory module, including its electrical and mechanical characteristics. It details features such as power supply requirements, CAS latency options, and operational temperature ranges. Additionally, the document provides information on the module's dimensions and performance metrics.

Uploaded by

manaman4.djamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

kvr1066d3s7 2g

The document outlines the specifications for ValueRAM's 2GB DDR3-1066 CL7 SDRAM memory module, including its electrical and mechanical characteristics. It details features such as power supply requirements, CAS latency options, and operational temperature ranges. Additionally, the document provides information on the module's dimensions and performance metrics.

Uploaded by

manaman4.djamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Memory Module Specifications

KVR1066D3S7/2G
2GB 256M x 64-Bit PC3-8500
CL7 204-Pin SODIMM

DESCRIPTION SPECIFICATIONS
This document describes ValueRAM’s 256M x 64-bit 2GB
CL(IDD) 7 cycles
(2048MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM)
Row Cycle Time (tRCmin) 50.63ns (min.)
memory module, based on sixteen 128M x 8-bit DDR3-1066
FBGA components. The SPD is programmed to JEDEC Refresh to Active/Refresh 110ns
Command Time (tRFCmin)
standard latency 1066Mhz timing of 7-7-7 at 1.5V. This 204-
pin SODIMM uses gold contact fingers and requires +1.5V. Row Active Time (tRASmin) 37.5ns (min.)
The electrical and mechanical specifications are as follows: Power 1.560 W (operating)

UL Rating 94 V - 0
FEATURES
Normal Operating Temperature 0° C to 85° C
• JEDEC standard 1.5V ± 0.075V Power Supply
Storage Temperature -55° C to +100° C
• VDDQ = 1.5V ± 0.075V
• 533MHz fCK for 1066Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 6,7,8,9
• Posted CAS
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7(DDR3-1066)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does
not allow seamless read or write [either on the fly using A12
or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE ≤ 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component

Continued >>

Kingston.com Document No. VALUERAM0667-001.A00 06/22/08 Page 1


continued ValueRAM

MODULE DIMENSIONS:

(units = millimeters)

Kingston.com Document No. VALUERAM0667-001.A00 06/22/08 Page 2

You might also like