Scribd
Upload
53 views4 pages

INSTALLATION

This document outlines the installation procedure for the rear seat assembly of a 60/40 split type seat cushion. It includes safety precautions, specific steps for installing the rear seatback holder and assembly, and instructions for securing the seat with bolts and buckles. Proper handling and installation techniques are emphasized to avoid damage and ensure safety.

Uploaded by

T3BL3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views4 pages

INSTALLATION

This document outlines the installation procedure for the rear seat assembly of a 60/40 split type seat cushion. It includes safety precautions, specific steps for installing the rear seatback holder and assembly, and instructions for securing the seat with bolts and buckles. Proper handling and installation techniques are emphasized to avoid damage and ensure safety.

Uploaded by

T3BL3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

14/3/17, 10)40 am

SEAT REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1.INSTALL REAR SEATBACK HOLDER RH 71397B

NOTICE:
· Perform the following only when replacing the rear seatback holder RH.
· Do not reuse the rear seatback holder RH after removing it.

a. Attach the claw to install 2 new rear seatback


holder RH.

Install in this Direction

2.INSTALL REAR SEAT ASSEMBLY

a. Place the rear seat assembly in the cabin.


NOTICE:
· Installing the rear seat assembly from the vehicle must be performed by multiple people.
· Do not damage the rear seat assembly, body exterior or vehicle interior.

b. Push in the installation direction shown in the illustration and attach the hook to install the rear seat assembly.

c. Temporarily install the rear seat assembly with the 5 bolts.

d. Tighten the 5 bolts in the order shown in the illustration.


Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M00B.html Page 1 of 4
14/3/17, 10)40 am

Install in this Direction

e. w/o Center Headrest:


Pass the 3 inner belt buckles through the elastic
strap of the seatback and connect them to the
seatback.

Install in this Direction

f. w/ Center Headrest:
Pass the 4 inner belt buckles through the elastic strap of the seatback and connect them to the seatback.

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M00B.html Page 2 of 4
14/3/17, 10)40 am

Install in this Direction

g. Detach the 2 No. 1 fold seat stopper band


assemblies from the stay of the rear seat headrest
assembly.

h. Return the 2 rear seat cushion assemblies to its


original position to lock the 2 seat cushion locks.

i. w/ Center Headrest:
Connect the rear seat center outer belt to the buckle.

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M00B.html Page 3 of 4
14/3/17, 10)40 am

Install in this Direction

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000M00B.html Page 4 of 4

You might also like