Form 6930, Revised

(442)
Printed in U. S. A.

list
OF

PARTS

AAACHINES
Nos. 31-15 and 31-20

A TRADE MARK OF

THE SINGER MANUFACTURING COMPANY

rom the library of: Superior Sewing Machine & Supply LLC
 /
A

/
INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear

of the parts whtch are In movable contact, the machine
requires oiling and when In continuous use, "TYPE B"
OIL, sold only by Singer Sewing Machine Company,
should be applied at least twice each day to all oil
holes marked "OIL" and to other places at rear and
underside of the machine where parts are in movable
contact.

Copyright, U. S. A., 1935, 1936, 1939, 1941 and 1942

by The Singer Manufacturing Co.
All Rights Reserved for all Countries

rom the library of: Superior Sewing Machine & Supply LLC
r-
 "VT?"
•

INDEX

Attachments and Accessories 19

Belt Guards 19
Binders 19 to 25
Bobbin Winders 25 to 28
Cordera 28
Edge Polders on Shank 29
Feed Dogs 29
Finger Guards 30
Guides 31
Hemmers 31 to 34
Hematitcher. 34
Knee Lifter Parts 34
Lap Seam Feller 35
Machine Base 36
Machine No. 31-15 7
Machine No. 31-20 13
Numerical List of Parts 45
Obsolete Parts 42
Piping Attachment 36
Presaer Feet ..........36 to 38
Quilter 39
Ruffler (Power) 39
Throat Plates 40
Tucker 40

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER in the
FIRST column.
The number stamped on a Sewing Machine Part Is In every
case the number of the single part only.
EJvery combination of parts sent out as such has Its
specific number, which, although not stamped on the parts, must
be used when ordering the combination.
Each number always Indicates the SAME PART In whatever list
it appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated
A.C-Brown Baking EUamel Finish
A.D-Gray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
A.Q-Alumlllte, Plain
A.H-Alumlllte, Dyed
A.J-Pollshed, Nickel Plated and Chromium Plated
A.K-Hardened, Polished, Nickel Plated and Chromium Plated
A.L-Heat Treated for Toughness
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
C.R-Hardened and Merllzed
D-Polished Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
0-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Oxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merllzed
S-Cadmium Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING - Conllnued

U-Zlnc Plated
V-Sllver Plated
W-Pollshed and Nickel Plated
I-Black Oxide, for Iron and Steel
X.C-Hardened and Black Oxide, for Iron or Steel
Y-Black Nickel Plated Only
Z-Chromlum Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Polished, Nickel Plated, Buffed and Chromium Plated
Z.C-Hardened and Chromium Plated
Z.D-Pollshed and Chromium Plated
Z.Q-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium
Plated
Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the l i s t .
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to-50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures In the second column i^fer only to the plates.
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts marked with an asterisk (•) are furnished only when
repairs are made at factory.

From the library of: Superior Sewing Machine & Supply LLC
/
 SINGER Needles should be usecT
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO."'*"

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 LIST OF PARTS COMPLETE

MACHINE No. 31-15

FOR CLOTH, TAILORING, ETC; DROP FEED.

No. Plate Name

*12355 Arm with 15404 and two 15405
8582 22307 " Dowel Pin
12453 22307 " Oil Tube for intermediate bearing
12454 22307 " " " with 132590, for oiling
12409
Arm Oil Tube with 52045 for oiling
12408
Arm Oil Tube with 52045 for oiling
20283
132590 Arm Oil Tube Packing (braided cotton)
52045 Arm Oil Tube Packing (braided cotton)
748E " Screw (back) (2;
854E " (front) (2)
12427 " Shaft
44122 " " 1242? with 20188, 20283 and
127152
44189 Arm Shaft 44122 with 20197
12357 " " Flanged Bushing (back)
448AL Set
Screw '....
144D Arm Shaft Screw
12480 " Side Cap
219J " " " Screw

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE NO. 31-15
No. Plate Name
12193 22307 Arm Side Cover
51224J 22307 'I " " Thumb Screw
52239 22307 " Spool Pin and Thread Eyelet
8879 22307 " " " Washer (cloth)
12358 22303 Balance Wheel (power) light rim,
2 3/16 in. pulley, with two 448AL
139631 Balance Wheel (power) "v" belt groove
(outside diam. of belt groove 2.9
in.) with two 443AL
4370 Balance Wheel (stand) heavy rim,
2 3/4 in. pulley, with two 448AL.
2135 22303 Balance Wheel (stand) heavy rim,
2 1/2 in. pulley, for 3022
2662 Balance Wheel (stand) heavy rim, 3
in. pulley, for 3022
24297 22303 Balance Wheel Oil Cover, for use with
2135 and 2862
210J 22303 Balance Wheel Oil Cover Screw
448AL 22303 " " Set Screw for 4370 and
12358 (2)
443AL Balance Wheel Set Screw for 139631
(2)
*12360 Bed
256J 22303 Clamp Stop Motion Clamp Screw
II ir ti M o.. i
248A 22303 Stop Screw...
2020 22303 ^ Washer
•3023 " Flanged Bushing..,.
4933 22303 '• 3023
with two 462AL
•56827 Clamp Stop Motion Flanged Bushing
3023 with 256J
2022 Cl^p Stop Motion Flanged Bushing Pin
462AL 22303 " " " " " Set
Screw (2)
3022 22303 Clamp Stop Motion complete, Nos.248A,
256J, 2020 and 4933
20197 22303 Crank Connecting Rod with two 896AL..
896AL 22303 II II II Cap Screw (2)...
908C 22303 Hinge Screw
11
1619E 22303
20057 22304 Face Plate
20058 Pace Plate complete, Nos. 12150,20057
and 139615
190J 22304 Pace Plate Screw
12150 22304 " " Thread Guard (lower) with
12152
12152 22304 Face Plate Thread Guard (lower) Rivet
45874
" " " (upper)
139615 22304 " 45874
with 125424
125424 22304 Pace Plate Thread Guard (upper) Rivet
51224J 22304 " " Thumb Screw
12368 22305 Peed Bar
3130 22305 " " Screw Center (2)
56813 313C with
1519J (2)
1519J 22305 Peed Bar Screw Center Nut (2)
52165 22303 " Connecting Link
375C
1518J
22303
22303
II II II Hinge Screw (2).
Nut
(2)
44252 22304 Peed Dog, for cloth, 12 teeth (12
teeth to the inch)
208AL 22304 Peed Dog Screw (2)

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR A\ACHINE NO. 31-15

Ko. Plate Name

20283 22303 Feed and Feed Lifting Eccentric with
446AL
446AL 22303 Feed and Peed Lifting Eccentric Set
Screw
127152 22303 Peed and Peed Lifting Eccentric
Sleeve
20284 22303 Peed Forked Connection
375C 22303 " " " Hinge Screw...
1518J 22303 " Nut
43993 - - - - -
Peed Forked Connection complete, Noa.
20284, 52165, 56886 and two each
375C and 1518J
44125 22305 Peed Lifting Rock Shaft
44126 22305 Peed Lifting Rock Shaft complete,
Nos. 12376 and 44125
12376 22305 Peed Lifting Rock Shaft Crank with
157J and 1813
157J 22305 Feed Lifting Rook Shaft Crank Clamp
ing Screw
1813 22305 Feed Lifting Rock Shaft Crank Roller
and Stud
43976 22303 Peed Lifting Rock Shaft Crank Con
necting Rod with two 966E
966E 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Cap Screw (2)
375C 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw
1518J 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw Hut
307C 22305 Feed Lifting Rock Shaft Screw Center
(2)
56814 Peed Lifting Rock Shaft Screw Center
307C with 1513J (2)
1513J 22305 Feed Lifting Rock Shaft Screw Center
Hut (2)
3039 22303 Peed Regulator
56886 " " 3039 with 8iaD
1128E 22303 " " Hinge Screw...
818D 22303 " " Thumb Screw
12379 22305 " Rock Shaft
20333 Feed Rock Shaft complete, Hos. 12379
and 29633
29633 22305 Peed Rock Shaft Crank with 157J
157J 22305 " " " " Clangjing Screw.
3070 22305 "tt "M Screw
M M
"11
Center (2)
jQyj,
56814
with 1513J (2)
1513J 22305 Feed Rock Shaft Screw Center Nut (2).
12381 22306 Needle Bar (hollow)
43997 22306 " " Connecting Link with 794E
and 12384
794E 22306 Needle Bar Connecting Link Adjusting
Screw
12384 22306 Needle Bar Connecting Stud with 453AL
and 1904
1904 22306 Needle Bar Connecting Stud Roller
(roller only)
453AL 22306 Needle Bar Connecting Stud Set Screw.
20188 22303 " " Crank with 858AL and
1065AL
1055AL 22303 Needle Bar Crank Position Screw
858AL 22303 " " " Set Screw
956E 22306 " " Screw Bushing (2)
4302 22306 " " Thread Guard

From the library of: Superior Sewing Machine & Supply LLC
 10 PARTS FOR MACHINE NO. 31-15
No. Plate Name
233D 22306 Needle Bar Thread Guard Screw
4303 22306 " Clamp with 808P
808P 22306 " Screw
*24104 Oscillating Rock Shaft
24105 22303 Oscillating Rock Shaft complete, Nos.
4784, 12388 and 24104
139602 Oscillating Rock Shaft 24105 with
908C
12388 22303 Oscillating'Rook'shaft'Hlnge'Hn!!!!
448AL 22303 " " " " " Set
Screw
4784 22303 Oscillating Rock Shaft Oil Pad
12389 22305 " Shaft
19496 " " Crank for 19447....
44134 22305 " " " " 44135....
19447 Oscillating Shaft Crank complete,
Nos. 457AL, 1518E, 19449 and
19496
44135 22305 Oscillating Shaft Crank "conplete,
Nos. 1518E, 19449, 44134 and two
453AL
2049 Oscillating Shaft Crank Pin
457AL " " " Set Screw for
19447
453AL 22305 Oscillating Shaft Crank Set Screw for
44135 (2)
19448 22305 Oscillating Shaft Crank Slide Block..
226J 22305 " " " " "
Cap Screw
12424 22305 Oscillating Shaft Cra^ Slide Block
Cap Screw Washer
988C 22305 Oscillating Shaft Crank Slide Block
Screw Stud
1518E 22305 Oscillating Shaft Crank Slide Block
Screw Stud Nut
19449 Oscillating Shaft Crank Slide Block
complete, Nos. 226J, 988C, 12424
and 19448
12391 22306 Presser Bar (hollow)
20059 22306 " " Guide Bracket with 453AL.
453AL 22306 Presser Bar Guide Bracket Set Screw..
52016 22306 " " Lifter
6890 22306 " " " Screw. . .
1520J 22306 " " " " Nut.!!!!!!.'!
12327 22306 " " Lifting and Releasing
Lever Bracket
11167 22306 Presser Bar Spring (ll^t) .051 wire.
Note; No. 11167 is sent with this machine omless
another Spring is specified on order.
12139 Presser Bar Spring (medium) .055 wire
20023 ;; "" " heavy) .063 wire.
11170 22306 " " " Washer.
12143 22306 " Foot for 44252 and 44253
190J 22306 Presser Foot Screw
688J 22306 Pressure Regulating Thumb Screw
2996 22306 Shuttle Bobbin
15140 22306 " " Case Latch
2973 22306 " " " " Lever
2974 22306 " " " " " p^cr^
Pin
2975 22306 Shuttle Bobbin Case Latch Spring.....
592E 22306 " " " " Stop Screw.
15141 Shuttle Bobbin Case Hinge, Nos. 2973,
2974 and 15140

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE NO. 31-15 11

No. Plate Name

24412 22307 Shuttle Bobbin Case Position Plate...
391J 22307 " " " " "
Screw (2)
62740 22306 Shuttle Bobbin Case complete, Nos.
591P, 592E, 2975, 15141 and 15278
12393 22306 Shuttle Body
591P 22306 " Tension Regulating Screw
15278 22306 " " Spring
19292 22306 Shuttle, 1 11/16 In. dlam., Nos.2996,
12393, and 62740
12444 22305 Shuttle Driver with two 1266AL
2049 " " Pin
1266AL 22305 " " Set Screw (2)
2531 22307 " Race Back
2532 22307 " " " Position Pin (2)...
2533 22307 " " " Spring
907D 22307 " " " " Screw
24413 22307 " " Body
25000 " " " 24413 with 24414
and two 1053E
24962 Shuttle Race Body 25000 with two 2532
24414 22307 " " Cap
1053B 22307 " " " Screw (2)
24415 22307 Shuttle Race complete, Nos. 907D,
2531, 2533, 24412, 24962 and two
391J
145D 22307 Shuttle Race Screw (2)
12431 22304 " " Slide
12432 22304 Shuttle Race Slide complete, Nos.
4307, 12431 and two 725J
4307 22304 Shuttle Race Slide Spring
725J 22304 " " " " Screw (2)..
20060 22306 Slack Thread Regulator
225P 22306 " " " Adjusting
Screw
2102 22304 Tension Disc (2)
1560C 22304 " Regulating Thumb .Nut
32572 22304 " Releasing Disc
43944 22304 " " Lever
12398 22304 " " " Hinge Pin
12329 22304 " " " Spring
32574 22304 " " Pin
50327C 22304 " Screw Stud
44141 " " " 50327C with 1560C.
43945 22304 " Spring
44118 22304 Tension complete, Nos. 7336, 32572,
32574, 43945, 43946, 44141 and
two 2102
52454 22304 Thread Retainer
624AL 22304 " " Set Screw
12404 22306 " Take-up Crank
3094 22303 " " " Wedge
690E 22303 " " " " Screw
12408 22306 " " Lever
775E 22306 " " " Cap Screw
12166 22306 " " " Hinge Pin
12409 22306 " " " Link
11204 22306 " " " " Hinge Pin..
435AL 22306 " " " " " " Set
Screw
12410 Thread Take-up Lever complete, Nos.
12166, 12408 and 12409
43946 22304 Thread Take-up Spring

From the library of: Superior Sewing Machine & Supply LLC
 12 PARTS FOR MACHINE NO. 31-15

No. Plate Name

7336 22304 Thread Take-up Spring Regulator
448AL 22304 " " " " Set
Screw
43990 Thread Take-up complete, Nos. 775E,
11204, 12404, 12410 and 43997
44256X0 22304 Throat Plate, large needle hole, for
4.4.252 ftnd 4.4.255
691X0 22304 Throat Plate Screw (2)!!!!!!!!!!!!!!!
*15404 Trade Mark
15405 " " Rivet (2)
139622 22341 Drip Pan with four 1 in. wire nails..

SINGER Needles should be used

In SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.'''*"

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 13

LIST OF PARTS COMPLETE

FOR

t;iH63

MACHINE No. 31-20

FOR CLOTH. THROAT PLATE FLUSH WITH BED.

DROP FEED.

No. Plate Name

*12355 Arm with 15404 and two 15405
8582 22317 " Dowel Pin
12453 22317 " Oil Tube for intermediate bearing
12454 22317 " " " with 132590 for oiling
12409
11119 22317 Arm Oil Tuba with 52045 for oiling
12408
24131 22317 Arm Oil Tube with 52045 for oiling
20283
132590 22317 Arm Oil Tube Packing (braided cotton)
52045 22317 " " " " (braided cotton)
748E 22317 " Screw (back) (2)
854E 22317 " " (front) (2)
12427 22303 " Shaft
44122 Arm Shaft 12427 with 20188, 20283 and
127152
44189 Arm Shaft 44122 with 20197
12357 22503 " " Flanged Bushing (back)
448AL 22303 " " .. ® ^
Screw
144D 22303 Arm Shaft Screw
12480 22315 " Side Cap
219J 22315 " " " Screw

From the library of: Superior Sewing Machine & Supply LLC
 14 PARTS FOR MACHINE NO. 31-20

No. Plate Name

12193 22317 Arm Side Cover
51224J 22317 " " " Thimb Screw
52239 22317 " Spool Pin and Thread Eyelet
8879 22317 " " " Waeher (cloth)
12358 22303 Balance Wheel (power) light rim,,
2 3/16 in. pulley, with two 448AL
139631 Balance Wheel (power) "v" halt groove
(outside diam. of belt 2.9 in.)
with two 443AL
4370 Balance Wheel (stand) heavy rim,
2 3/4 in. pulley, with two 448AL.
2135 22303 Balance Wheel (stand) heavy rim,
2 1/2 in. pulley, for 3022
2862 Balance Wheel (stand) heavy rim, 3
in. pulley, for 3022
24297 22303 Balance Wheel Oil Cover for 2135 and
2862
210J 22303 Balance Wheel Oil Cover Screw
448AL 22303 " " Set Screw for 4370 and
12358 (2)
443AL Balance Wheel Set Screw for 139631
(2)
*12360 Bed
256J 22303 Clanro Stop Motion Clamp Screw
248A 22303 "M "
II
"II . "II Stop
, • .
Screw...
2020 22303 ,, „ „ Washer
*3023 Flanged Bushing....
4933 22303 " " " " " 5Q22
with two 462AIi
*56827 Clamp Stop Motion Flanged BusUng
3023 with 256J
2022 Clamp Stop Motion Flanged Bushing Pin
462AL 22303 Set
Screw (2)
3022 22303 Clamp Stop Motion conqilete, Nos.248A,
256J, 2020 and 4933
20197 22303 Crank Connecting Rod with two 896AL..
896AL 22303 ;; ;; ;; cap screw (2)...
908C 22303 Hinge Screw
1619E 22303 " Nut.
20057 22304 Face Plate
20058 Face Plate complete, Nos. 12150,20057
and 139615
190J 22304 Face Plate Screw
12150 22304 " " Thread Guard (lower) with
12152
12152 22304 Face Plate Thread Guard (lower) Rivet
It ft It ft > {
45874 (upper)
139615 22304 " " " " 45874
with 125424....
125424 22304 Face Plate Thread Guard (upper) Rivet
51224J 22304 " " Thiunb Screw
12368 22315 Feed Bar
313C 22315 " " Screw Center (2)
56813 " " " " 313C with 1519J
(2)
1519J 22315 Feed Bar Screw Center Nut (2)
52165 22303 " Connecting Link
375C 22303 " *' " Hinge Screw (2).
1518J 22303 " Nut
(2)
44252 22304 Feed Dog, for cloth, 12 teeth (12
teeth to the inch)
208AL 22304 Feed Dog, Screw (2)

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE NO. 31-20 15

No. Plate Name

20283 22303 Peed and Peed Lifting Eccentric with
446AL
446AL 22303 Peed and Peed Lifting Eccentric Set
Screw
127152 22303 Peed and Peed Lifting Eccentric
Sleeve
20284 22303 Peed Porked Connection
375C 22303 Peed Porked Connection Hinge Screw...
M M II II II
1518J 22303
43993 Peed Porked Connection complete, Nos.
20284, 52165, 56886 and two each
3750 and 1518J
44125 22315 Peed Lifting Rock Shaft
44126 22315 Peed Lifting Rock Shaft conqjlete,
Nos. 12376 and 44125
12376 22315 Peed Lifting Rock Shaft Crank with
157J and 1813
157J 22315 Peed Lifting Rock Shaft Crank Clamp
ing Screw
1813 22315 Peed Lifting Rock Shaft Crank Roller
and Stud
43976 22303 Peed Lifting Rock Shaft Crank Con
necting Rod with two 966E
966E 22305 Peed Lifting Rock Shaft Crank Con
necting Rod Cap Screw (2)
3750 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw
1518J 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw Nut
307C 22315 Peed Lifting Rock Shaft Screw Center
(2)
56814 Peed Lifting Rock Shaft Screw Center
307C with 1513J (2)
1513J 22315 Peed Lifting Rock Shaft Screw Center
Nut (2)
3039 22303 Peed Regulator
56886 " 3039 with 818D
1128E 22303 " " Hinge Screw
818D 22303 " " Thumb Screw
12379 22315 " Rock Shaft
20333 Peed Rock Shaft complete, Nos. 12379
and 29633
29633 22315 Peed Rock Shaft Crank with 157J
157J 22315 " " " " Clamping Screw.
307C 22315 "tt "ti
Screw
II
Center
ti
(2)
307C
"It
56814
with 1513J (2)
1513J 22315 Peed Rock Shaft Screw Center Nut (2).
12381 22316 Needle Bar (hollow)
43997 22316 " " Connecting Link with 794E
and 12384
794E 22316 Needle Bar Connecting Link Adjusting
Screw
12384 22316 Needle Bar Connecting Stud with 453AL
and 1904
1904 22316 Needle Bar Connecting Stud Roller
(roller only)
453AL 22316 Needle Bar Connecting Stud Set Screw.
20188 22303 " " Crank with 858AL and
1065AL
1065AL 22303 Needle Bar Crank Position Screw
858AL 22303 " " " Set Screw
936E 22316 " " Screw Bushing (2)
4302 22316 " " Thread Guard

From the library of: Superior Sewing Machine & Supply LLC
 16 PARTS FOR MACHINE NO. 31-20

No. Plate Name

233D 22316 Needle Bar Thread Guard Screw
4303 22316 " Clamp with 808P
808P 22316 " " Screw
*24104 Oscillating Rock Shaft
24105 22303 Oscillating Rock Shaft complete, Nos.
4784, 12388 and 24104
139602 Oscillating Rock Shaft 24105 with
9080
12388 22303 Oscillating Rock Shaft Hinge Pin
448AL 22303 " " " " " Set
Screw
4784 22303 Oscillating Rock Shaft Oil Pad
12389 22315 " Shaft
19496 " " Crank for 19447..,.
44134 22315 " " " " 44135
19447 Oscillating Shaft Crank complete,
Nos. 457AL, 1518E, 19449 and
19496
44135 22315 Oscillating Shaft Crank complete,
Nos. 1518E,19449,44134 and two
453AL
2049 Oscillating Shaft Cra^ Pin
457AL " " " Set Screw for
19447
453AL 22315 Oscillating Shaft Crank Set Screw for
44135 (2)
19448 22315 Oscillating Shaft Crank Slide Block..
226 J 22315 " " " " "
Cap Screw
12424 22315 Oscillating Shaft Creuck Slide Block
Cap Screw Washer
988C 22315 Oscillating Sheift Crank Slide Block
Screw Stud
1518E 22315 Oscillating Shaft Crank Slide Block
Screw Stud Nut
19449 Oscillating Shaft Crank Slide Block
complete, Nos. 226J, 988C, 12424
and 19448
12391 22316 Presser Bar (hollow) t
20059 22316 Presser Bar Guide Bracket with 453AL.
453AL 22316 " " " " Set Screw..
52016 22316 " " Lifter
689C 22316 " " " Screw
1520J 22316 " " " " Nut
12327 22316 " " Lifting and Releasing
Lever Bracket
11167 22316 Presser Bar Spring (light) .051 wire.
Note: No. 11167 is sent with this machine unless
another Spring is specified on order.
12139 Presser Bar Spring (medium) .055 wire
20023 " " " (heavy) .063 wire.
11170 22316 " " " Washer
12143 22316 " Poot for 44252 and 44253
190J 22316 " " Screw
688J . 22316 Pressure Regulating Thumb Screw
19131 22316 Shuttle Bobbin
20649 22316 " " Case Latch
2973 22316 " " " " Lever
2974 22316 " " " " "
Fulcrum Pin
2975 22316 Shuttle Bobbin Case Latch Spring
592E 22316 " " " " -Stop Screw.
20650 Shuttle Bobbin Case Hinge, Nos. 2973,
2974 and 20649

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE NO. 31-20 17

No. Plate Name

24323 22317 Shuttle Bobbin Case Position Plate...
If 11 II II 11
391J 22317
Screv (2)
20756 22316 Shuttle Bobbin Case complete, Nos.
591P,592E,2975,20650 and 20654...
20757 22316 Shuttle Body
591P 22316 " Tension Regulating Screw
20654 22316 " " Spring.
20758 22316 Shuttle, 1 11/16 In. dlam., Nos.
19131, 20756 and 20757
19406 22315 Shuttle Driver with two 1266AL
2049 " " Pin
1266AL 22315 " " Set Screw (2)
2419 22317 " Race Back
2532 22317 " " " Position Pin (2)...
2533 22317 " " " Spring
907D 22317 " Screw
24324 22317 " " Body
24998 " " " 24324 with 24009
and two 1053E
24999 Shuttle Race Body 24998 with two 2532
24009 22317 " " Cap
1053E 22317 " Screw (2)
24325 22317 Shuttle Race complete, Nos. 907D,
2419,2533,24323,24999 and two
391J
145D 22317 Shuttle Race Screw (2)
12431 22304 " " Slide
12432 22304 Shuttle Race Slide con^lete, Nos.
4307, 12431 and two 725J
4307 22304 Shuttle Race Slide Spring
725J 22304 " Screw (2)..
20060 22316 Slack Thread Regulator
fl II ^11 AJ • A.J
225P 22316 Adjusting
Screw
2102 22304 Tension Disc (2)
1560C 22304 " Regulating Thumb Nut
32572 22304 " Releasing Disc
43944 22304 " " Lever
12398 22304 " " " Hinge Pin
12329 22304 " " " Spring
32574 22304 " " Pin
50327C 22304 " Screw Stud
44141 " " " 503270 with 15600.
43945 22304 " Spring
44118 22304 Tension cosQ>lete, Nos. 7336, 32572,
32574,43945,43946,44141 and two
2102
52454 22304 Thread Retainer
624AL 22304 " " Set Screw
12404 22316 " Take-up Crank.
3094 22303 Wedge
690E 22303 Screw
12408 22316 Lever.
775E 22316 Cap Screw
12166 22316 Hinge Pin
12409 22316 Link
11204 22316 " Hinge Pin..
435AL 22316
Set Screw
12410 Thread Take-up Lever conqilete, Nos.
12166, 12408 and 12409
43946 22304 Thread Take-up Spring

From the library of: Superior Sewing Machine & Supply LLC
 18 PARTS FOR MACHINE NO. 31-20

No. Plate Name

7336 22304 Thread Take-up Spring Regulator
448AL 22304 " " " " Set
i
Screw
43990 Thread Take-up complete, Nos. 775E,
11204, 12404, 12410 and 43997....
44256XC 22304 Throat Plate, large needle hole, for
44252 and 44253...
691XC 22304 Throat Plate Screw (2)
*15404 Trade Mark
15405 " " Rivet (2)
139622 22341 Drip Pan with four 1 In. wire nails..

SINGER Needles should be used

in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO." *" I

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 19

ATTACHMENTS AND ACCESSORIES

No. Plate Name ^
12361 24059 Machine Hinge Connection (2)
41400 24059 " Rest Pin (wood) 3 1/8 in.
long
120342 24059 Oiler (copper plated) with 120343.
120343 24059 " Spout, 3 1/2 in. long
26026 24059 Screw Driver (machine)
26485 24059 " " (shuttle tension)....
8909 24059 Wrench for 1513 and 1518
8908 24059 " " 1519, 1520 and 1620
19221 24059 " " 936 and 1619
4822 24059 " " 1521

BELT GUARDS
No. Plate Name
41929 22343 Belt Guard
8418 22343 " " Button
8419 22343 " " " Washer (leather)...
8420 " " " 8418 with 8419 and
wood screw 1 1/4 in. No. 9 R.H.B.
41930 22343 Belt Guard Hinge (2)
41931 22343 Belt Guard complete, Nos. 8420, 41929,
two 41930 and four wood screws
3/4 in. No. 9

FOR BENCH STANDS

No. Plate Name

126356 22332 Belt Guard.
126363 22332 Bracket
126364 22332 Extension.
162D 22332 " Screw
9331 22332 " " Washer..,
1480D 22332 Retaining Screw
50551J 22332 Set Screw
126365 22332 Belt Guard (adjustable) complete,
Nos. 162D, 1480D, 9331, 50551J,
126356, 126363, 126364 and two
wood screws 1 in. No. 10

BINDERS
WHEN ORDERING BINDERS SEND SAMPLE OF THE

BINDING AND THE MATERIAL TO BE BOUND

BINDER (Adjustable)
SIZE I

No. Plate Name

25644 22912 Bed with 25645
25645 Polder
25646 22912 " Guide (lower) with 25855.
25855 " " " Screw Stud.
25647 22912 Folder Guide (upper)

From the library of: Superior Sewing Machine & Supply LLC
 20 BINDERS

No. Plate Name

157 7D 22912 Polder Guide (upper) Thumb Nut
25648 22912 Pressure Spring
334J 22912 " " Screw
7071 22912 " " " Washer
25650 22912 Binder complete, Nos. 334J, 1577D,
7071, 25644 and 25646 to 25648.
190J 22912 Binder Screw

BINDER (Adjustable)
SIZE 2

THIS BINDER IS THE SAME AS NO. 25650

WITH THE FOLLOWING EXCEPTIONS:

No. Plate Name

25651 22912 Bed with 25652, In place of 25644.,
25652 Polder, In place of 25645
25653 22912 Binder complete, Nos. 334J, 1577D,
7071, 25646 to 25648 and 25651.

BINDER (Adjustable)
SIZE 3

THIS BINDER IS THE SAME AS NO. 25650

WITH THE FOLLOWING EXCEPTIONS:

No. Plate Name

25654 22912 Bed with 25655, In place of 25644..
25655 Polder, In place of 25645
25656 22912 Binder complete, Nos. 334J, 1577D,
7071, 25646 to 25648 and 25654.

BINDER (Adjustable)
FOR CAP FRONTS

FOR 31-20 MACHINE

No. Plate Name

26695 24060 Bed with 9558
25698 24060 Polder
9558 24060 " Steady Pin
26696 24060 Guide (lower) with 1141D and 9780,
1141D 24060 " " Screw Stud
9780 24060 " " Stud
1566D 24060 " " Thumb Nut
26697 24060 " (upper)
152P 24060 " Screw (2)
7071 24060 " Washer (2)...,
25703 24060 Pressure Spring with 26698
26698 24060 " " Lifting Button....

From the library of: Superior Sewing Machine & Supply LLC
 BINDERS 21

No. Plate Name

334J 24060 Pressure Spring Screw
7071 24060 " " " Washer
26694 24060 Binder complete, Nos. 334J, 1566D,
25698,25703,26695 to 26697, two
152P and three 7071

BINDER (English)

No. Plate Name

121444 24061 Peed Dog. 13 teeth (16 teeth to the
inch) for 121445
25721 24061 Polder
207P 24061 " Screw
7071 24061 " " Washer
25983 24061 Presser Poot
26614 Ribhon Tension Pin (bent)
26615 ;; ;; " (straight) (4)....
26616 " " PjLate
25722 24061 Ribbon Tension complete, Nos. 26614,
26616 and four 26615
190J 24061 Ribbon Tension Screw
7071 24061 " " " Washer
121445XC 24061 Throat Plate for 121444
26250 24061 Binder complete, Nos. 190J, 207P,
25721, 25722, 25983, 121444,
121445XC and two 7071

BINDER (English)
FOR CUT CLOTH

No. Plate Name

19474 22916 Peed Dog, 14 teeth (16 teeth to the
inch) for 26401
25733 22916 Polder, for 1/2 in. binding
207P 22916 " Screw
7071 22916 " " Washer
26400 22916 Presser Poot
26617 Ribbon Tension Pin (bent)
26486 ;; ;; " (straight) (7)....
26618 " " Plate
25734 22916 Ribbon Tension complete, Nos. 26617,
26618 and seven 26486...
190J 22916 Ribbon Tension Screw (2)
7071 22916 " Washer (2)
26401X0 22916 Throat Plate for 19474
26402 22916 Binder cocrplete, Nos. 207P, 19474,
25733, 25734, 26400, 26401X0, two
190J and three 7071

BINDER (English)
FOR HEAVY WORK

No. Plate Name

121446 24062 Peed Dog (spiked teeth) 13 teeth (10
teeth to the inch) for 121447....
28334 24062 Polder

From the library of: Superior Sewing Machine & Supply LLC
 22 BINDERS

No. Plate Nmne

193J 24062 Polder Screw.
7071 24062 " " Waeher
28676 24062 Pre seer Foot *
2663 7 Ribbon Tension Pin (bent)
26486 ;; ;; " (straight) (8)...,
28336 " " Plate
28337 24062 Ribbon Tension complete, Nos. 26617,
28336 and eight 26486
233J 24062 Ribbon Tension Screw (2)
121447XC 24062 Throat Plate for 121446
28678 24062 Binder complete, Nos. 193J, 7071,
28334, 28337, 28676, 121446,
121447XC and two 233J

BINDER (.English)
FOR CARPETS

THIS BINDER IS THE SAME AS NO. 28678

WITH THE FOLLOWIN© EXCEPTIONS;

No. Plate Name

12370 24062 Peed Dog. 15 teeth (16 teeth to the
Inch) for 28775, In place of
121446
28775XC 24062 Throat Plate for 12370, In place of
12144 7
28776 24062 Binder conQjlete, Nos. 193J, 7071,
12370,28334,28337,28676,28775X0
and two 233J.

BINDER (English)
FOR AWNINGS

No. Plate Name

120434 22916 Peed Dog. 7 teeth (16 teeth to the
Inch) for 120436
120433 22916 Polder
207P 22916 " Screw
7071 22916 " " Washer
120435 22916 Presser Foot
26614 Ribbon Tension Pin (bent)
26615 ;; ;; " (straight) (4)....
26616 " Plate
25722 22916 Ribbon Tension complete, Nos. 26614,
26616 and four 26615
190J 22916 Ribbon Tension Screw
7071 22916 " " " Washer
120436X0 22916 Throat Plate for 120434
120437 22916 Binder complete, Nos. 190J, 207P,
25722, 120433 to 120436X0 and two
7071

From the library of: Superior Sewing Machine & Supply LLC
 BINDERS 23

BINDER (English)
FOR SLIP COVERS AND GENERAL WORK

THIS BINDER IS THE SAME AS NO. 120437

WITH THE FOLLOWINe EXCEPTION:

No. Plate Name

120458 22918 Presaer Foot, In place of 120435.
120459 22918 Binder complete, Noa. 190J, 207F,
25722,120433,120434,120436X0,
120458 and two 7071

BINDER (English)

No. Plate Name

120124 22918 Feed Dog. 6 teeth (16 teeth to the
inch) for 120126
120120 22918 Polder with 665J and 120121
120121 22918 " Guide
665J 22918 " " Screw
220J 22918 " Screw
7806 22918 " " Waaher....
120125 22918 Preaaer Foot
26614 Ribbon Tenaion Pin (bent)
26615 ;; ;; " (straight) (6)....
120122 " " Plate
120123 22918 Ribbon Tension complete, Nos. 26614,
120122 and six 26615
190J 22918 Ribbon Tension Screw (2)
7071 22918 " Washer (2)
120126X0 22918 Throat Plate for 120124
120127 22918 Binder complete, Nos. 220J, 7806,
120120, 120123 to 120126X0 and
two each 190J and 7071

BINDER (Transverse) ON SHANK

FOR FOLDED OR UNFOLDED BIAS BINDING

(WITH TAPE REEL)

FOR GENERAL WORK

FOR % INCH, % inch and I INCH TAPE

No. Plate Name

121167 23249 Binder Folder on Shank
43525 23249 " Steady Pin
51097J 23249 " Thumb Screw
3146 23249 " " " Washer
121397 23249 Feed Dog. 18 teeth (16 teeth to the
inch) for 121398
121169 23249 Preaaer Foot
121412 23249 Tape Reel Arm with 8879, 23263 and
120537
23263 23249 Tape Reel Arm Steady Pin

From the library of: Superior Sewing Machine & Supply LLC
 24 BINDERS

No. Plate Name

51097J 23249 Tape Reel Arm Thumb Screv
120536 23249 " " Disc with 120538 and 120539
120537 23249 " " " Pin
8879 23249 " " " " Washer (cloth)....
120538 23249 " Stud (wood)
120539 23249 " Sleeve (brass)...
121398X0 25249 Throat Plate with 43525, for 121397..
121168 23249 Binder (transverse) on Shank complete,
for 3/4 In., 7/8 In. and 1 In.
tape, Nos. 3146, 120536, 121167,
121169, 121397, 121398XC, 121412
and two 51097J

BINDERS ON SHANK

No. Plate Name

25705 22922 Binder on Shank, for 3/8 In. tape.,..
If II II ' M ' J ^ w m w w
25706 22922 7/16 In. tape...
25707 22922 1/2 In. tape....
25708 22922 9/I6 In. tape...
25709 22922 5/8 In. tape..,.
25710 22922 II/I6 In. tape..
25711 22922 3/4 In. tape....
25712 22922 12^16 In. tape..
25713 22922 7/8 In. tape....
25714 22922 15/I6 In. tape..
25715 22922 1 In. tape
28632 22922 " " to tTirn edges under.
28635
28693
22922 ,, ,, „ for 7/8 In. binding.
22922 for binding the arm
holes In cotton garments
35066 22943 Presser Foot, for 28693
28970 24061 Binder on Shank, for bias binding, to
turn both edges under
35082 24061 Binder on Shank, for raw edge bias
binding, for wrappers, etc.
35208 24063 Binder on Shank, to ttirn In both
edges, for bias or straight bind
ing, for skirts, wrappers, shirt
waists, etc
26603 24063 Peed Dog. 20 teeth (16 teeth to the
Inch) for 26605, for 35208
52055 24063 Presser Foot, for 35208
26605X0 24063 Throat Plate, large needle hole, for
26603, for 35208
7298 24064 Presser Foot Hinge Pin
120143 24064 " " Plate
19335 24064 " " Shank
120144 24064 Presser Foot (hinged) complete for
35208, Nos. 7298, 19335 and
120143
35226 24064 Binder on Shank, for mattress work...
26603 24064 Peed Dog. 20 teeth (16 teeth to the
Inch) for 26605, for 35226
121446 24064 Feed Dog. 13 teeth (10 teeth to the
Inch) for 26605, for 35226
35231 24064 Presser Foot, for 35226
26605X0 24064 Throat Plate, large needle hole, for
26603 and 121446, for 35226
35325 24064 Binder on Shank, to turn top edge
only, for shirt bosoms, skirt
trimmings, etc

From the library of: Superior Sewing Machine & Supply LLC
 BINDERS 25
No. Plate Name
19474 24064 Feed Dog. 14 teeth (16 teeth to the
Inch) for 24572, for 35325
35066 24064 Presser Foot for 35325
24572XC 24064 Throat Plate, small needle hole, for
19474, for 35325
7298 24064 Presser Foot Hinge Pin
120143 24064 " " Plate
19335 24064 " " Shank
120144 24064 Presser Foot (hinged) complete for
35325, Nos. 7298,19335 and 120143

BINDERS (Horn) ON SHANK

No. Plate Name

28619 24065 Binder (horn) on Shank
28620 24065 Presser Foot for 28619
35062 24065 Binder (horn) on Shank, for 7/8 In.
1 1/2 In. bindings, for tape, for
mattresses
35063 24065 Presser Foot for 35062

BOBBIN WINDERS
BOBBIN WINDER

FOR 4370

No. Plate Name

15072 22335 Bobbin Position Pin
12168 22335 Bracket
692D 22335 " Screw
12169 22335 Frame
12171 22335 Frame coiiq)lete, Nos. 333D,5960, 5961,
5963, 12169 and 15077
32D 22335 Frame Hinge Screw
5960 22335 Friction i^eel (leather)
5961 22335 " " Washer
333D 22335 " " " Screw
15077 22335 Spindle with 15072
5963 22335 " Flange
12170 22335 Spr^
180P 22335 Screw
12172 22335 Bobbin Winder complete, Nos. 32D,
180F, 12168, 12170 and 12171

BOBBIN WINDER

FOR 2135 AND 2862

THIS BOBBIN WINDER IS THE SAME AS NO, 12172

WITH THE FOLLOWIN0 EXCEPTIONS:

No. Plate Name

12201 22335 Frame complete, Nos. 333D,5960,5961,
5963,12169 and 15077, In place of
12171

From the library of: Superior Sewing Machine & Supply LLC
 26 BOBBIN WINDERS

No. Plate Name

12202 22335 Bobbin Winder complete, Noa. 32D,

180P, 12168, 12170 and 12201.

BOBBIN WINDER

FOR 12358

THIS BOBBIN WINDER IS THE SAME AS NO. 12172

WITH THE FOLLOWING EXCEPTIONS:

No. Plate Name

20307 22335 Frame, in place of 12169
20308 22335 Frame complete, Nos. 333D,5960,5961,
5963, 15077 and 20307, in place
of 12171
20309 22335 Bobbin Winder complete, Nos. 32D,
180F, 12168, 12170 and 20308

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND)

FOR 31-15 MACHINE

No. Plate Name

27540 22333 Base
15072 22333 Bobbin Position Pin
27302 22333 Frame
50356D 22333 "n Hinge
11°
Screw
ti
162 OJ 22333 „ Nut
27303 Spring
27541 22333 Pulley
27538 22333 Spindle Collar with 15072 and 41828..
41828 22333 " " Pin
27306 22333 Spool Pin
11241 22333 " " Washer (cloth)
27307 22333 Stand
27308 22333 Spool Stand complete, Nos. 418E,
1562J, 2106, 10141, 11241, 27306,
27307 and two each 2455 and wood
screws 1 in. No. 10
27312 22333 Stop Latch
35D 22333 " " Hinge Screw
2455 22333 Tension Disc (2)
1562J 22333 " Regulating Thvunb Nut
418E 22333 Screw Stud
10141 22333 " Spring
2106 22333 " Thread Guide
27647 22333 Bobbin Winder, Nos. 35D,1620J,27302,
27303,27312,27538,27540,27541,
50356D and two wood screws 1 in.
No. 7
27544 22333 Bobbin Winder (swinging automatic,
right hand) complete, Nos.27308
and 27647

From the library of: Superior Sewing Machine & Supply LLC
 BOBBIN WINDERS 27

BOBBIN WINDER
(SWINGING AUTOA^ATIC, RIGHT HAND)
FOR 31-20 A\ACHINE

THIS BOBBIN BINDER IS THE SAME AS NO. 275A4

WITH THE FOLLOWING EXCEPTIONS:

No. Plate Name

27587 24066 Stop Latch, in place of 27312
27875 24066 Bobbin Winder, Nos. 35D,1620J,27302,
27303,27538,27540,27541,27587,
50356D and two wood screws 1 in.
No. 7, in place of 27647
27876 24066 Bobbin Winder (swinging automatic,
right hand) complete, Nos. 27308
and 27875

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND)

FOR POWER TABLE

FOR ROUND BELT

No. Plate Name

259428 23253 Brake (leather)
259429 23253 " Clang)..
200113P 23253 " " Screw
259430 23253 Bobbin Winder and Tension Bracket
Base
225453 23253 Frame with 202277 and 225438
225454 23253 " Hinge Pin
202277 23253 " Oil Packing (wick)
225438 23253 " " Well Cap
225455 23253 " Spring
225456 23253 " " Pi\mger....
225368 23253 Pulley with 200380C
200380C 23253 " Set Screw
225381 23253 Spindle
225444 23253 Stop Latch
200056E 23253 " " Screw
225458 23253 " " Thumb Lever
225459 23253 " " " " Hinge Stud.,
225459 23253 " " " " Joint Stud.,
202478 23253 " " Trip Lever
200299H 23253 " " " " Hinge Screw.,
225461 23253 Tension Bracket with 201499B
200082D 23253 " " Screw
228026 23253 " " " Washer
2102 23253 " Disc (2)
13710 23253 " Spring
201499B 23253 " Stud
201572B 23253 " " Thumb Nut
225462 23253 Bobbin Winder Tension Bracket
conqplete, Nos. 13710, 201572B,
225461 and two 2102

From the library of: Superior Sewing Machine & Supply LLC
 28 BOBBIN WINDERS

No. Plate Name

259431 23253 Bobbin Winder complete for round belt^
Nos. 200056E, 200082D, 200113P,
200299H, 202478, 225368, 225381,
225444,225453 to 225456,225458,
225462, 228026, 259428 to 259430
and two each 225459 and vood
screws 3/4 in. No. 12 R.H.B

BOBBIN WINDER
(SWINGING AUTOAAATIC, RIGHT HAND)
FOR POWER TABLE

FOR "V BELT

THIS BOBBIN BINDER IS THE SAME AS NO. 259431

WITH THE FOLLOWING EXCEPTIONS:

No. Plate Name

259461 23253 Pulley with 2003800, in place of
225368
259462 23253
Nos. 200056E, 200082D, 200113P,
200299H,202478,225381,225444,
225453 to 225456,225458,225462,
228026,259428 to 259430,259461
and two each 225459 and wood
screws 3/4 in. No. 12 R.H.B....,

CORDERS
WHEN ORDERING CORDERS OR PARTS THEREOF, STATE SIZE

OR NUMBER OF CORDS TO THE INCH

CORDER ( Adjustable )
FOR SHORT TURNS ON CUSHIONS

No. Plate Name

26795 24063 Cord Guide
26796 24063 " " Arm
1044D 24063 " " " Hinge Screw
120206 24063 " Bed with 457AL
457AL 24063 " " " Leveling Screw
190J 24063 " " Screw
120207 24063 Corder complete, Nos. 190J, 1044D,
26795, 26796 and 120206
121446 24063 Peed Dog (spiked teeth) 13 teeth (10
teeth to the inch) for 26605X0...
120208 24063 Presser Poot (grooved)
26605X0 24063 Throat Plate, large needle hole, for
121446

From the library of: Superior Sewing Machine & Supply LLC
 CORDERS 29

CORDER (Adjustable)
FOR CUSHIONS

No. Plate Name

26795 24067 Cord Guide
26796 24067 " " Arm
1044D 24067 " " " Hinge Screw
28644 24067 " ' Bed
190J 24067 " " Screw
28645 24067 Corder complete, Nos. 190J, 1044D,
26795, 26796 and 28644
35562 24067 Presser Foot for 28645

EDGE FOLDERS ON SHANK

No. Plate Name
28649 24068 Edge Folder on Shank
35175 24069 Edge Folder on Shank
12450 24069 Feed Dog. 11 teeth (18 teeth to the
inch) for 12451 and 12464, for
35175
35176 24069 Preaser Foot, for 35175
12464XC Throat Plate, large needle hole, for
12450, for 35175
12451XC 24069 Throat Plate, small needle hole, for
12450, for 35175

FEED DOGS
FOR 31-15 MACHINE

No. Plate Name

12455 24070 Feed Dog. 13 teeth (14 teeth to the
inch) for shirt work, beveled for
hemmer, for 12456 and 20398
12468 24070 Feed Dog. 16 teeth (16 teeth to the
inch) for shirt work, beveled for
hemmer, for 139616 and 139617....
20471 24070 Feed Dog. 22 teeth (22 teeth to the
inch) for shirt work, beveled for
hemmer, for 139616 and 139617....

FOR 31-20 MACHINE

20147 24060 Feed Dog, 12 teeth (14 teeth to the

inch) for 19412 and 19413
44156 24060 Feed Dog, 24 teeth (24 teeth to the
inch) for 19418 and 19419
44177 24060 Feed Dog, 19 teeth (22 teeth to the
inch) for 19412 and 19413
20158 24060 Feed Dog, 16 teeth (16 teeth to the
inch) for shirt work, for 19418
and 19419

From the library of: Superior Sewing Machine & Supply LLC
 30 feed dogs

FOR 31-15 AND 31-20 MACHINES

No. Plate Name
12481 24067 Feed Dog, 18 teeth (16 teeth to the
inch) for 12482 and 12483
43978 24067 Peed Dog, 24 teeth (22 teeth to the
inch) for 12482 and 12483
12450 24067 Feed Dog. 11 teeth (18 teeth to the
inch) for cloth, for 12451 and
12464
44253 24067 Feed Dog. 16 teeth (16 teeth to the
inch) for cloth, for 44255 and
44256
20348 24067 Feed Dog. 22 teeth (36 teeth to the
inch) for chiffon, for 12451 and
12464

FINGER GUARDS

No. Plate Name

36818 24071 Finger Guard
36819 24071 " " Friction Washer
50316J 24071 " " Hinge Screw
36820 24071 " " Holder with 196J
133J 24071 " " " Clamping Screw...
36821 24071 Finger Guard complete, Nos. 36818 to
36820 and 50316J
120496 24071 Finger Guard
120497 24071 " " Holder with 50302J
50302J 24071 " " " Set Screw
236J 24071 " " Screw
120498 24071 Finger Guard complete, Nos. 236J,
120496 and 120497
120856 24071 Finger Guard
120858 24071 " " Holder with 50302J
50302J 24071 " " " Screw
236J 24071 " Screw (2)
120859 24071 Finger Guard con5)lete, Nos. 120856,
120858 and two 236J
120857 24071 Finger Guard
120858 24071 " " Holder with 50302J
50302J 24071 " " " Screw
236J 24071 " " Screw (2)
120860 24071 Finger Guard complete, Nos. 120857,
120858 and two 236J
121334 24071 Finger Guard
120497 24071 " " Holder with 50302J
50302J 24071 " " " Set Screw
236J 24071 " " Screw
121335 24071 Finger Guard complete, Nos. 236J,
120497 and 121334
121618 24071 Finger Guard...
120858 24071 " " Holder with 50302J
50302J 24071 " " " Screw
236J 24071 " Screw (2)
121619 24071 Finger Guard complete, when machine
is fitted with a Roller Presser,
Nos. 120858, 121618 and two 236J.

From the library of: Superior Sewing Machine & Supply LLC
 31

GUIDES

No. Plate Namtr

25866 22337 Guide, for throat plate flush with
bed
25874 22337 Guide, for throat plate raised above
bed
25873 22337 Guide (combination)
28658 22337 " (roller) with 1852
1852 22337 " Roller
284 W 22337 " Thumb Screw (long)
50190W 24063 " (short)
3146 22337 " " " Washer for 25873...

GUIDE (Adjustable, Hinged)

28971 22337 Guide
11
28972 22337 Holder
tl
35610 22337 " Friction Washer.
tl
940W 22337 " Hinge Screw
120427 22337 " Shank
II
51224W 22337 Thumb Screw
II
7071 22337 " " Washer
120428 22337 Guide
Nos. 940W, 7071, 28971, 28972,
35610, 51224W and 120427

HEA\MERS
HEMMER WITH LEVER FOROPENING THEFOLDER AND RELEASjNG
THE HEM, SO THAT IT CAN BE FINISHED WITHOUT REMOVING
THE HEMMER FROM THE MACHINE. FOR SKIRTS, OVERALLS

OR SIMILAR CLOSED ARTICLES.

No. Plate Name

28679 24072 Hemmer Bed with 28681
28680 " Polder (left)
233J 24072 "" " " Screw
2362 24072 " " " Steady Pin
28681 " " (right)
28685 24072 Hemmer Polder Disengaging Lever
94D 24072 " " " " Hinge
Screw
2362 24072 Hemmer Polder Disengaging Lever Stop
Pin
28682 24072 Hemmer Slide with 28687 and two each
2362 and 12152
28683 24072 Hemmer Slide Cap (left)
28684 24072 " " " (right)
207F 24072 " " Screw (back) (2)...
233J 24072 " " " " (front) (2)..
28686 24072 " Spring
28687 24072 " " Cover

From the library of: Superior Sewing Machine & Supply LLC
 32 MEMMERS

No. Plate Name

12152 24072 Hemmer Slide Spring Cover Rivet (2)..
28688 24072 Henuner complete, Nos. 94D, 28679,
28680,28682 to 28686, two 207P
and 233J
190J 24072 Hemmer Screw
18055 24072 Presser Foot Hinge Pin
28689 24072 " " Plate.....
28690 24072 " " Shank
26231 24072 " " Spring
28691 24072 Presser Foot (spring hinged) complete,
Nos. 18055,26231,28689 and 28690..

HEMMERS (Foot)

No. Plate Name

120938 24073 Hemmer (foot) for 3/32 in. hem.
120803 24073 1/8 in. hem.
120804 24073 5/32 in. hem
120805 24073 3/16 in. hem
36122 24073 7/32 in. hem
120806 24073 1/4 in. hem
120807 24073 5/16 in. hem
121761 24073 l/8 in. hem, for
hemming shirts
121762 24073 Hemmer (foot) for 5/32 in. hem, for
hemming shirts
121760 24073 Hemmer (foot) for 1/6 in. hem for
hemming shirts, for 121758 and
121759
121758 24073 Feed Dog. 13 teeth (16 teeth to the
inch) for 121759, for 121760
121759X0 24073 Throat Plate, small needle hole, for
121758, for 121760
35710 24073 Hemmer (foot) for 3/32 in. hem, with
guide on bottom to right of
needle hole
35682 24073 Hemmer (foot) for l/8 in. hem, with
guide on bottom to right of .
needle hole
36524 24073 Hemmer (foot) for 5/32 in. hem, with
guide on bottom to right of
needle hole
35997 24073 Hemmer (foot) for 3/I6 in. hem, with
guide on bottom to right of
needle hole
36309 24073 Hemmer (foot) for 7/32 in. hem, with
guide on bottom to right of
needle hole
36072 24073 Hemmer (foot) for 1/4 in. hem, with
guide on bottom to right of
needle hole
120898 24073 Hemmer (foot) for 1/I6 in. to 1/8 in.
hem, for China silk, etc
120911 24073 Hemmer (foot with shell hemmer) for
5/52 in. to 1/4 in. hem, for
China silk, etc
36413 24073 Hemmer (foot) plain bottom, for 1/I6
in. hem
36414 24073 Hemmer (foot) plain bottom for 3/52
in. hem
36480 24073 Hemmer (foot) plain bottom for 5/32
in. hem

From the library of: Superior Sewing Machine & Supply LLC
 HEMMERS 33

No. Plate Name

36416 24073 Hemmer (foot) plain bottom, for 3/16
In. hem
120837 24073 Hemmer (foot) plain bottom, for l/S
in. hem, slotted for lace
121801 24064 Hemmer (foot) for l/8 in. hem, for
hemming shirts for 44252, 44256,
52031 and 52032
121802 24064 Hemmer (foot) for 5/32 in. hem, for
hemming shirts, for 44252,44256,
52031 and 52032
121803 24064 Hemmer (foot) vide folder, for 3/I6
in. hem, for hemming shirts, for
44252, 44256, 52031 and 52032
121804 24064 Hemmer (foot) narrow folder, for 3/I6
in. hem, for hemming shirts, for
44252, 44256, 52031 and 52032
121848 24064 Hemmer (foot) for 3/32 in hem, for
hemming shirts, for 44252,44256,
52031 and 52032
121798 24064 Hemmer (foot) for 1/8 in. hem, for
hemming shirto, for 44252,44256,
52031 and 52032
52031 24064 Peed Dog. 19 teeth (22 teeth to the
inch) for 52032, for 121801 to
121804, 121798 and 121848
52032XC 24064 Throat Plate, large needle hole, for
52031, for 121801 to 121804,
121798 and 121848

HEMMERS ON SHANK

No. Plate Name

26652 Hemmer, for 3/32 in. hem
26654 " Rivet
26653 " Shank
26655 24074 Hemmer on Shank complete, Nos. 26652
to 26654
12450 24074 Peed Dog. 11 teeth (I8 teeth to the
inch) for 12451 and 12464, for
26655
26656 24074 Prosser Poot, for 26655
12464XC 24067 Throat Plate, large needle hole, for
12450, for 26655
12451XC 24074 Throat Plate, small needle hole, for
12450, for 26655
26659 Hemmer
26660 24074 Hemmer on Shank complete, for 3/32 in.
hem, for umbrella work, Nos.
26653, 26654 and 26659
26661 Hemmer (wide)
26662 24074 Hemmer on Shank complete, Nos. 26653,
26654 and 26661
26663 Hemmer
26664 24074 Hemmer on Shank complete, for raw
edge silk, Nos. 26653, 26654 and
26663
26665 Hemmer, for l/s in. hem
26666 24074 Hemmer on Shank complete, Nos. 26653,
26654 ^d 26665
121843 Hemmer
28711 24065 Hemmer on Shank with 121843, for I/8
in. to 1/2 in. hem, for towels...

From the library of: Superior Sewing Machine & Supply LLC
 34 HEMMERS

No. Plate Name

120338 24065 Hemmer
1443J 24065 " Screw (2)
120339 24065 " Shank
120340 24065 Hemmer (adjustable) on Shank,
complete, for 1/2 in. to 2 in.
hem, Nos. 120338, 120339 and two
1443J
28627 24072 Hemmer on Shank, for l/8 in . to 5/6
in. gauges, for M€o?seilles quilts
28628 24072 Presser Foot for 28627
35241 22943 Hemmer on Shank, for Oanton flannel,
etc
19474 22943 Feed Dog. 14 teeth (16 teeth to the
inch) for 19475, for 35241
35066 22943 Presser Foot for 35241
7298 22943 " " Hinge Pin
120143 22943 " " Plate
19335 22943 " " Shank
120144 22943 Presser Foot (hinged) complete, for
35241, Nos. 7298, 19335 and
120143
19475X0 22943 Throat Plate, large needle hole, for
19474, for 35241
35863 22943 Hemmer on Shank, for canvas work
26603 22943 Feed Dog. 20 teeth (16 teeth to the
inch) for 26605, for 35863
35066 22943 Prosser Foot, for 35863
26605X0 22943 Throat Plate, large needle hole, for
26603, for 35863
28650 24065 Hemmer on Shank, for hemming heavy
Canton flannel
28653 24074 Hemmer on Shank, for 2 9/l6 in. to 3
in. hem
28710 24068 Hemmer on Shank, for 1/8 in. hem
II II II II -1 1 /. . n
28721 24068 1 1/4 in. to 2
in. hem
35475 24068 Hemmer on Shank, for 5/32 in. hem,
with right hand lower guide, for
lace
36776 24065 Hemmer on Shank,for 2 1/4 in. to 3
in. hem

HEMSTITCHER

No. Plate Name

28671 24067 Hemstitcher.

KNEE LIFTER PARTS

No. Plate Name
5596 22305 Bell Crank
56848 " " 5596 with 5599 and 5601.
5599 22305 " " Bracket
178E 22305 " " " Screw (2)
5601 22305 " " Hinge Pin
5735 22305 " " Spring
5598 22305 Bell Crank cosiplete, Nos. 5735 and
56848
12237 22305 Lifting Lever with 448AI
12415 22305 " " Connecting Rod
12416 22305 " " " " Joint.

From the library of: Superior Sewing Machine & Supply LLC
 KNEE LIFTER PARTS 35

No. Plate Name

76D 22305 Lifting Lever Connecting Rod Joint
Hinge Screv
152IJ 22305 Lifting Lever Connecting Rod Lock Nut
802D 22305 Hinge Screw
n H -p ^ A
12241 22306 Link
766E 22306 " " " Hinge Screw
12240 22305 " " Pin
448AL 22305 " " " Set Screw
2763 22338 Rock Shaft
139633 " " 2763 with 2770, 6357 and
139623
127312 22338 Rock Shaft Hanger (back) with two
wood screws 1 In. Ho. 10 P.H.,
for 139624
12242 22338 Rock Shaft Hanger (front) with two
wood screws 1 In. No. 10 P.H.,
for 139624
7539 22338 Rook Shaft Hanger with two wood
screws 1 In. Ho. 10 P.H., for
139625 (2)
2765 22338 Rock Shaft Itoee Arm
2766 22338 " " " " Hub with 356C...
356C 22338 " " " " " Set Screw...
2768 Rock Shaft Knee Arm complete, Hos.
2765 to 2767
2767 22338 Rock Shaft Knee Plate with 356C
356C 22338 " " " " Set Screw
6337 22338 " " Lifting Bracket with two
3560
139623 22338 Rock Shaft Lifting
.... « ®
Bracket
..
Hook
..
356C 22338
Screw
356C 22338 Rock Shaft Lifting Bracket Set Screw.
2770 22338 " " Stop Dog with 1402190
140219C 22338 " " " " Set Screw
139624 22338 Rock Shaft complete, for 139626, Nos.
2768, 12242, 127312 and 139633...
139625 22338 Rock Shaft complete, for 139627, Nos.
2768, 139633 and two 7539
139626 Knee Lifter complete (power table)
Hos. 76D, 766E, 802D, 1521J,
5598, 12237, 12240, 12241, 12415,
12416, 139624 and two 178E
139627 Knee Lifter complete (individual
motor and foot power stands) Hos.
76D, 766E, 8020, 1521J, 5598,
12237, 12240, 12241, 12415, 12416,
139625 and two 178E

LAP SEAM FELLER

Ho. Plate Name

28673 24072 Lap Seam Peller (right hand) on Shank,
to fold top only
28674 24072 Lap Seam Guide on Shank

From the library of: Superior Sewing Machine & Supply LLC
 36

MACHINE BASE

No. Plate Name

19219 22309 Bed Frame Cushion (leather) (4)
158C 22309 Screw (8)
19220 22309 " " Spring (4)
19226 22309 " Hinge Connection (2)
19398 " " " " 19226 with
211E and 19397 (2)
19397 22309 Bed
II
Frame
II
Hinge
II
Connection
II
Cap (2)...
II Sqpq^
211E 22309
(2)
16555 22509 Bed Frame Hinge Plate (2)
14010 22309 " Rivet (6)
20067 22309 Bed Frame with two each 16555^ 19398,
four each 19219, 19220, six each
14010, wood screws 1 1/4 In. No.
12 and eight 158C

PIPINe ATTACHMENT

No. Plate Name

44253 24061 Feed Bog. 16 teeth (16 teeth to the
Inch) for cloth, for 44255 and
44256
120977 24061 Piping Attachment
1443J 24061 " " Screw
35245 24061 Piping Attachment complete, for
piping house dresses, Nos. 1443J
and 120977
52056 24061 Presser Foot
44256XC 24061 Throat Plate, large needle hole, for
44253
44255XC Throat Plate, small needle hole, for
44253

PRESSER FEET

No. Plate Name

12258 24075 Presser Foot (wide) for 44252 and
44253
12335 24075 Presser Foot (narrow) for 44252 and
44253
12142 24075 Presser Foot for 12455, 12468, 12481,
20158, 20471, 24978 and 44156
12144 24075 Presser Foot for 12455, 12468, 12481,
20147, 20158, 20471, 43978 and
44156
12259 24075 Presser Foot, for 12455, 12468^ 12481,
20158, 20471, 43978 and 44156
12260 24075 Presser Foot, for 12450, 12455, 12468,
12481, 20147, 20158, 20348, 20471,
43978 and 44156
12261 24075 Presser Foot, for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....
12474 24075 Presser Foot, for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....
20020 24075 Presser Foot, for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....

From the library of: Superior Sewing Machine & Supply LLC
 PRESSER FEET 37

No. Plate Name

20342 24075 Preeaer Foot, for 12450, 12455, 12468,
12481, 20158, 20348, 20471, 43978
and 44156
20343 24075 Preaser Foot with guide on bottom to
right of needle hole for 12450,
12455, 12468, 12481, 20158, 20348,
20471, 43978, 44156, 44252 and
44253
20458 24075 Preaaer Foot, for 12455, 12468,
12481, 20158, 20471, 43978 and
44156
121941 24075 Preaaer Foot for No. 5 Slide Faatener,
for atitchin^ *it right or left of
alide fastener, for heavy woolen
suiting and dresses, for 12455,
12468, 12481, 20158, 20471, 43978
and 44156
'7298 24075 Preaaer Foot Hinge Pin
19334 24075 " " Plate
19335 24075 " " Shank
19336 24075 Preaaer Foot (hinged) coniplete, for
12455, 12468, 12481, 20158, 20473,
43978 and 44156, Noa. 7298, 19334
and 19335
7298 24075 Preaaer Foot Hinge Pin
20268 24075 " " Plate
20269 24075 " " Shank
20270 24075 Preaaer Foot (hinged) complete, for
44252 and 44253, Noa. 7298, 20268
and 20269
62527 24075 Preaaer Foot Hinge Pin
20310 24075 " " Plate
19223 24075 " " Shank
20311 24075 Preaaer Foot (hinged) complete, for
12455, 12468, 12481, 20147, 20158,
20471, 43978 and 44156, Noa.
19223, 20310 and 62527
62527 24075 Preaaer Foot Hinge Pin
20344 24075 " " Plate
20345 24075 " " Shank
26231 24075 " " Spring
20346 24075 Preaaer Foot (spring hinged) complete,
for 12455, 12468, 12481, 20147,
20471 and 43978, Noa. 20344,
20345, 26231 and 62527
62527 24075 Preaaer Foot Hinge Pin
24544 24075 " " Plate
24982 24075 " " Shank
26231 24075 " " Spring
24983 24075 Preaaer Foot (spring hinged) complete,
for 12455, 12468, 12481, 20158,
20471, 43978 and 44156, Noa.
24544, 24982, 26231 and 62527....
62527 24075 Preaaer Foot Hinge Pin
121943 24075 " " Plate
121944 24075 " " Shank
121945 24075 " " Spring
121946 24075 Preaaer Foot complete, for No. 5
Slide Faatener, for stitching at
right or left of slide faatener,
for crossing seams, for 12455,
12468, 12481, 20158, 20471, 43978
and 44156, Noa. 62527 and 121943
to 121945

From the library of: Superior Sewing Machine & Supply LLC
 38 PRESSER FEET

Ko. Plate Name

12467 24075 Presser Foot, for umbrella work
28612 24075 " " for plain stitching....
28614 24075 " " for plain stitching
28622 24075 " " (grooved) for cording..
28715 24075 " " (tube) for laying
fringe-edged bradd
28725 24075 Presser Foot, Spring Guide
665J 24075 " " " " Screw
28726 24075 " " (right h£ind, spring
guide) with 665J and 28725, for
l/32 In. to 1/4 In. gauges
Note : When ordering Nos. 28725 or 28726 state re
quired distance from edge of goods to seam.
36183 24075 Presser Foot Braid Guide...,
665J 24075 " " " " Screw
36182 24075 " " with 665J and 36183, for
blind stitch braiding, for
soutache braid
Note : When ordering 36182 or 36185 send sample of
braid for which I t Is to be used.
36622 24075 Presser Foot
36576 24075 " " Finger Guard
50202J 24075 " " " " Screw (2)..
36623 24075 " " 36622 with 36576 and two
50202J

PRESSER FEET
WITH GRADUATED ADJUSTABLE GUIDES

35134 22946 Presser Foot with 36696, for 35137

121948 24075 " " with 36696, for 121949.
35002 22946 " " Extension for 35137..
35003 22946 " " Graduated Adjustable
Guide (long, left)
35004 22946 Presser Foot Graduated Adjustable
Guide (long, right)
35005 22946 Presser Foot Graduated Adjustable
Guide (short, right)
35006 22946 Presser Foot Graduated Adjustable
Guide (short, right) flush for
35137
35135 22946 Presser Foot Graduated Adjustable
Guide Clonq)
35136 22946 Presser Foot Graduated Adjustable
Guide Clamp Lever
337B 22946 Presser Foot Graduated Adjustable
Guide Clamp Screw
36696 22946 Presser Foot Graduated Adjustable
Guide Clamp Steady Pin
35137 22946 Presser Foot with Extension and
Graduated Adjustable Guides com
plete, for 12455, 12468, 12481,
20158, 20471, 43978 and 44156,
Nos. 337B, 35002 to 35006 and
35134 to 35136
121949 24075 Presser Foot with Graduated Adjust
able Guides complete, for No. 3
and No. 5 Slide Fastener, for
making various margins up to l/2
Inch between the slide fastener
and the line of stitching, for
12455, 12468, 12481, 20158, 20471,
43978 and 44156, Nos. 337B, 35003
to 35005, 35155, 35136 and 1219*8

From the library of: Superior Sewing Machine & Supply LLC
 39

QUILTERS
No. Plate Name
28659 22946 Quilter Guide
25992 22946 " " Holder vith two 207P..
207P 22946 " " Set Screw
207P 22946 Quilter Guide Set Screw
28660 22946 Qiiilter con5)lete, Noa. 25992 and
28659
120479 22946 Quilter Guide (ieft)..
120480
120481
22946
22946
;; : Bracket
Ught)
120482 " " 120481 with
120483 and two 2090
120483 22946 Quilter Guide Disengaging Sleeve....
120484 22946
Spring
602D 22946 Quilter Guide Disengaging Sleeve
Spring Screw
2090 22946 Quilter Guide Set Screw (2)
120485 22946 Quilter conrplete, Nos. 602D, 120479,
120480, 120482 and 120484

RUFFLER (Power)
WITH RI6HT AND LEFT GUIDES, WITH SEPARATING BLADES

AND DISENGAGING LEVER TO THROW RUFFLING

BLADE OUT OF ACTION.

No. Plate Name

26722 24068 Driving Lever
11010 24068 " " Hinge Screw
26668 24068 " " Spring
16400 24068 " " " Adjusting Nut..
26669 24068 Prame .'
26670 24068 Gviide (left) with 26679 and two 662J.
26671 24068 " (right) with 26679 and two 662J
223J 24068 " Screw
26718 24068 Needle Olamp Body
1943 24068 " " Roller
1115P 24068 " " Screw
26719 24068 Needle Olamp cong)lete, Nos. 1115P,
1943 and 26718
26675 24068 Ruffling Blade
26676 24068 " " Olamp
337J 24068 " Screw (2)
26723 24068 " " Lever
812B 24068 RTjffling Blade Lever Adjusting Thumb
Screw
1621J 24068 Ruffling Blade Lever Adjusting Thumb
Screw Nut
26678 24068 Ruffling Blade Lever Disengaging
Lever
102J 24068 Ruffling Blade Lever Disengaging
Lever Hinge Screw

From the library of: Superior Sewing Machine & Supply LLC
 40 RUFFLER

No. Plate Name

2301 24060 Ruffling Blade Lever Disengaging
Lever Stop Pin
26679 24068 Separating Blade
662J 24068 " " Screw (4)
26724 24068 Ruffler cooplete, Nos. 102J, 223J,
812B, IIOIC, 1621J, 16400, 2301,
26668 to 26671, 26675, 26676,
26678, 26719, 26722, 26723 and
two 337J .•

THROAT PLATES
FOR 31-IS MACHINE

No. Plate Name

20398X0 24070 Throat Plate, large needle hole, for
12455
12456X0 Throat Plate, small needle hole, for
12455
139616X0 24070 Throat Plate, large needle hole, for
12468 and 20471
139617X0 Throat Plate, small needle hole, for
12468 and 20471

FOR 31-20 MACHINE

No. Plate Name

19412X0 24060 Throat Plate, large needle hole, for
20147 and 44177
19413X0 Throat Plate, small needle hole, for
20147 and 44177
19418X0 24060 Throat Plate, large needle hole, for
20158 and 44156
19419X0 Throat Plate, small needle hole, for
20158 and 44156

FOR 31-15 AND 31-20 /MACHINES

No. Plate Name

12464X0 24067 Throat Plate, large needle hole, for
12450 and 20348
12451X0 24069 Throat Plate, small needle hole, for
12450 and 20348
12482X0 24067 Throat Plate large needle hole, for
12481 and 43978
12483X0 Throat Plate, small needle hole, for
12481 and 43978
44255X0 24067 Throat Plate, small needle hole, for
44252 and 44253

TUCKER
No. Plate Name
36655 24069 Driving Lever
36656 24069 " " Hinge Stud
36657 24069 " " Lock Spring
36658 24069 " " " " Rivet (2)
120500 24069 Frame

From the library of: Superior Sewing Machine & Supply LLC
 TUCKER 41

No. Plate Name

26718 24069 Needle Clamp Body
1943 24069 " " Roller
1115P 24069 " " Screw
26719 24069 Needle Clamp coaiplete, Noa. 1115P,
1943 and 26718
36660 24069 Tuck Guide
50238B 24069 " " Thumb Screw
36661 24069 " " " " Washer
36662 24069 " Marker (lower)
36663 " " " 36662 with 36664
and two 36648
36664 24069 Tuck Marker (upper)
120572 24069 " " Clamping Plate
50238B 24069 '• " " " Thumb
Screw
36648 24069 Tuck Meurker Rivet (2)
36667 24069 " Smoothing Spring
86354 24069 " " Rivet (2)
36561 24069 Tucker complete, Nos. 26719, 36655 to
36657, 36660, 36661, 36663, 36667,
120500, 120572 and two each 36658,
50238B and 86354

SINGER Needles should be used

in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.**"

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 42

OBSOLETE PARTS
No. Plate Name
12403 24077 Arm Spool Pin and Thread Eyelet, use
52239
29599 24077 Arm Oil Tube Packing (felt) for 11119,
12454 and 24131
44212 24076 Drip Pan with four 1 In. wire nails,
use 139622
45720 Pace Plate Thread Guard (upper)
45874 with 125373, use 139615....
125373 _ _ _ ^ _

Pace Plate Thread Guard (upper) Rivet

3033 24077 Peed Connecting Link, use 52165
120001 24077 Peed Dog (spiked teeth) 12 teeth (lO
teeth to the inch) superseded by
121446, not Interchangeable
12369 24077 Peed Dog, for cloth, 12 teeth (12
teeth to the Inch) superseded by
44252, not interchangeable
12457 24077 Peed Dog, for cloth, 16 teeth (16
teeth to the Inch) superseded by
44253, not Interchangeable
24036 24077 Feed and Peed Lifting Eccentric
Sleeve, use 127152
12374 24077 Peed Lifting Rock Shaft
12375 24077 Peed Lifting Rock Shaft coii5)lete, Nos.
3043, 12374 and 12376, use 44126.
3043 24077 Peed Lifting Rock Shaft Crank (back)
with 462AL
2049 Peed Lifting Rock Shaft Crank (back)
Pin
462AL Peed Lifting Rock Shaft Crank (back)
Set Screw
12430 24077 Feed Lifting Rock Shaft Crank Con
necting Rod with two 966E, use
43976
878J 24077 Oscillating Rock Shaft Hinge Pin Oil
Hole Stop Screw
12459 24077 Oscillating Rock Shaft Hinge Pin Oil
Hole Stop Screw Washer (leather).
460AL 24077 Oscillating Shaft Crank Set Screw,
for 19447
229J Oscillating Shaft Crank Slide Block
Cap Screw for 19449
2062 24077 Presser Bar Lifter, use 52016
2532 24077 Presser Foot Hinge Pin for 20157,
20311 and 20346
24545 24077 Presser Foot Shank, use 24982
24546 24077 Presser Foot (spring hinged) complete
for 12481 and 19474, Nos. 24544,24545,
26231 and 62527, use 24983
24074 Shuttle Bobbin Case complete for
19292, Nos. 591P, 592E, 2975,
15098 and 15141, use 62740
462AL Shuttle Driver Set Screw
15098 24077 Shuttle Tension Spring for 24074
2921 24077 Tension Disc (2)
20314 24077 Releaser
29549 24077 Releasing Lever
1018C Screw Stud
200B1 24077 " " Bushing
448AL " " " Set Screw.
20062 24077 " " Flange
20063 24077 " Collar

From the library of: Superior Sewing Machine & Supply LLC
 OBSOLETE PARTS 43

No. Plate Nome

2923 24077 Tension Spring
210958 Thread Retainer Collar
50429AL 24077 " Set Screw
210993 " Sleeve
12400 24077 " Sleeve
52398 24077 '' Spring
12401 24077 Spring
52378 24077 " Stud
12402 24077 " Stud
460AL 24077 " " Set Screw
52379 Thread Retainer complete, Kos. 52378,
52398, 210958 and 210993
12399 Thread Retainer complete, Nos. 12400
to 12402, use 52379
430C 24077 Thread Take-up Lever Link Hinge Pin
Set Screw
8511 24077 Thread Take-up Spring
12411X0 24077 Throat Plate, large needle hole, for
12369 and 12457, superseded by
44256, not interchangeable
12449XC Throat Plate, small needle hole, for
12369 and 12457, superseded by
44255, not interchangeable
12469XC 24077 Throat Plate, large needle hole, for
12468 and 20471, use 139616
12470X0 Throat Plate, small needle hole, for
12468 and 20471, use 139617

From the library of: Superior Sewing Machine & Supply LLC
 SINGER Needles should be used
In SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.**"

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL

LIST

OF PARTS

From the library of: Superior Sewing Machine & Supply LLC
 45

NUMERICAL LIST OF PARTS

No. Plate Name

32D 22335 Bobbin Winder Prsime Hinge Screv for
12172, 12202 and 20309
35D 22333 Bobbin Winder Stop Latch Hinge Screw
for 27647 and 27875
76D 22305 Lifting Lever Connecting Rod Joint
Hinge Screw for 139626 and 139627
94D 24072 Hemmer Polder Disengaging Lever Hinge
Screw for 28688
102J 24068 Ruffler Ruffling Blade Lever Disen
gaging Lever Hinge Screw for
26724
144D 22303 Arm Shaft Screw ?
145D 22307 Shuttle Race Screw (2)
152P 24060 Binder Guide (upper) Screw for 26694
(2)
157J 22305 Peed Lifting Rock Shaft Crank Clamp
ing Screw for 12376
157J 22305 Peed Rock Shaft Crank Clamping Screw
for 29633
158C 22309 Bed Prame Cushion Screw for 20067
(8)
162D 22332 Belt Guard Extension Screw for
126365
178E 22305 Bell Crank Bracket Screw for 139626
and 139627 (2)
180P 22335 Bobbin Winder Spring Screw for
12172, 12202 and 20309
190J 24061 Binder Ribbon Tension Screw for
26250, 26402, 120127, 120437 and
120459
190J 22912 Binder Screw
190J 24063 Corder Cord Guide Screw, for 28645
and 120207
190J 22304 Pace Plate Screw
190J 24072 Hemmer Screw
190J 22306 Presser Poot Screw
193J 24062 Binder Polder Screw for 28678 and
28776
196J 24071 Pinger Guard Holder Clamping Screw.
for 36820
207P 24061 Binder Polder Screw for 26250,26402,
120437 and 120459
207P 24072 Hemmer Slide Cap Screw (back) for
28688 (2)*...
207P 22946 Quilter Guide Holder Set Screw for
25992
207P 22946 Quilter Guide Set Screw for 25992...
208AL 22304 Peed Dog Screw (2)
209C 22946 Quilter Guide Set Screw for 120482
(2)
210J 22303 Balance Wheel Oil Cover Screw
211E 22309 Bed Prame Hinge Connection Cap Screw.
for 19398 (2)
219J 22305 Arm Side Cap Screw
220J 22918 Binder Polder Screw for 120127
223J 24068 Ruffler Guide Screw for 26724
225P 22306 Slack Thread Regulator Adjusting
Screw
226J 22305 Oscillating Shaft Crank Slide Block
Cap Screw for 19449

From the library of: Superior Sewing Machine & Supply LLC
 46 NUMERICAL LIST OF PARTS

No. Plate ITajne

229J Oscillating Shaft Crank Slide Block
Cap Screv for 19449, obsolete....
233J 24062 Binder Ribbon Tension Screw for
28678 and 28776 (2)
233J 24072 Henmier Polder (left) Screw for 28688
233J 24072 " Slide Cap Screw, (front) for
28688 (2)
233D 22306 Reedle Bar Thread Guard Screw
236J 24071 Finger Guard Screw for 120498,
120859, 120860, 121335 and 121619
248A 22303 Clamp Stop Motion Clamp Stop Screw
for 3022
256J 22303 Clamp Stop Motion Clamp Screw for
3022 and 56827
284V 22337 Guide Thumb Screw (long)
3070 22305 Feed Lifting Rock Shaft Screw Center
for 58814 (2)
307C 22305 Feed Rock Shaft Screw Center for
56814 (2)
313C 22305 Feed Bar Screw Center for 56813 (2).
333D 22335 Bobbin Winder Friction Wheel Washer
Screv for 12171, 12201 and 20308.
534J 22912 Binder Pressure Spring Screw for
25650, 25653, 25656 and 26694....
337B 22946 Presser Foot Graduated Adjustable
Guide Claii^) Screv for 35137 and
121949
337J 24068 Ruffler Ruffling Blade Clamp Screw
for 26724 (2)
356C 22338 Rock Shaft Knee Arm Hub Set Screv
for 2766
356C 22338 Rock Shaft Knee Plate Set Screw for
2767
356C 22338 Rock Shaft Lifting Bracket Hook Set
Screw for 6337
3560 22338 Rock Shaft Lifting Bracket Set Screv
for 6337
375C 22303 Peed Connecting Link Hinge Screw, for
43993 (2)
375C 22303 Feed Forked Connection Hinge Screv...
375C 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw
391J 22307 Shuttle Bobbin Case Position Plate
Screw for 24325 and 24415 (2)...
418E 22333 Bobbin Winder Tension Screw Stud for
27308
430C 24077 Thread Take-up Lever Link Hinge Pin
Set Screw obsolete
435AL 22306 Thread Take-up Lever Link Hinge Pin
Set Screw
443AL Balance Wheel Set Screw for 139631
(2)
446AL 22303 Feed and Peed Lifting Eccentric Set
Screw for 20283
448AL 22303 Arm Shaft Flanged Bushing (back) Set
Screw
448AL 22303 Balance Wheel Set Screw for 4370 and
12358 (2)
448AL 22305 Lifting Lever Pin Set Screw for
12237
44aAL 22303 Oscillating Rock Shaft Hinge Pin Set
Screw
446AL Tension Screw Stud Bushing Set Screw,
obsolete

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 47

No. Plate Name

448AL 22304 Thread Take-up Spring Regulator Set
Screw
4S3AL 22306 Needle Bar Connecting Stud Set Screw
for 12384
453AL 22305 Oscillating Shaft Crank Set Screw
for 44135 (2)
453AL 22306 Presser Bar Guide Bracket Set Screw
for 20059
457AL 24063 Corder Cord Guide Bed Leveling Screw
for 120206
457AL Oscillating Shaft Crank Set Screw
for 19447
460AL 24077 Oscillating Shaft Crank Set Screw for
19447, obsolete
460AL 24077 Thread Retainer Stud Set Screw, obso
lete
452AL 22303 Clamp Stop Motion Flanged Bushing Set
Screw for 4933 (2)
462AL Peed Lifting Rock Shaft Crank (back)
Set Screw for 3043, obsolete
462AL Shuttle Driver Set Screw, obsolete...
591P 22306 Shuttle Tension Regulating Screw for
20756, 24074 and 62740
592E 22306 Shuttle Bobbin Case Latch Stop Screw
for 20756, 24074 and 62740
602D 22946 Qullter Guide Disengaging Sleeve
Spring Screw, for 120485
624AL 22304 Thread Retainer Set Screw
662J 24068 Ruffler Separating Blade Screw for
26670 and 26671 (4)
665J 22918 Binder Polder Guide Screw for 120120
665J 24075 Presser Foot Braid Guide Screw for
36182
665J 24075 Presser Foot Spring Guide Screw for
28726
688J 22306 Pressure Regulating Thiimb Screw
589C 22306 Presser Bar Lifter Screw......
690E 22303 Thread Take-up Crank Wedge Screw
691XC 22304 Throat Plate Screw (2) .*.
692D 22335 Bobbin Winder Bracket Screw, for use
with Bobbin Winders 12172, 12202
and 20309
725J 22304 Shuttle Race Slide Spring Screw for
12432 (2)
748E 22307 Arm Screw (back) (2)
766E 22306 Lifting Lever Link Hinge Screw for
139626 and 139627
775E 22306 Thread Take-up Lever Cap Screw for
43990
794E 22306 Needle Bar Connecting Link Adjusting
Screw for 43997
802D 22305 Lifting Lever Hinge Screw for 139626
and 139627
808P 22306 Needle Clanqi Screw for 4303
812B 24068 Ruffler Riiffling Blade Lever Adjust
ing Thumb Screw for 26724
8iaD 22303 Feed Regulator Thumb Screw for 56886
854E 22307 Arm Screw (front) (2)
eSSAL 22303 Needle Bar Crank Set Screw for 20188
878J 24077 Oscillating Rook Shaft Hinge Pin Oil
Hole Stop Screw, obsolete
896AL 22303 Crank Connecting Rod Cap Screw for
20197 (2)

From the library of: Superior Sewing Machine & Supply LLC
 48 NUMERICAL LIST OF PARTS

No. Plate Name

907D 22307 Shuttle Race Back Spring Screw for
24325 and 24415
908C 22303 Crank Connecting Rod Hinge Screw for
139602
936E 22306 Needle Bar Screw Bushing (2)
940W 22337 Guide Holder Hinge Screw for 120420
966E 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Cap Screw for 12430
and 43976 (2)
988C 22305 Oscillating Shaft Crank Slide Block
Screw Stud for 19449
1018C Tension Screw Stud^ obsolete
1044D 24063 Corder Cord Guide Arm Hinge Screw,
for 28645 and 120207
1053E 22307 Shuttle Race Cap Screw, for 24998 and
25000 (2)
1065AL 22303 Needle Bar Crank Position Screw for
20188
IIOIC 24068 Ruffler Driving Lever Hinge Screw
for 26724
1115P 24068 Ruffler Needle Clan^ Screw for 26719
1115P 24069 Tucker Needle Clang) Screw for 26719.
1128E 22303 Peed Regulator Hinge Screw
1141D 24060 Binder Guide (lower) Screw Stud for
26696
1266AL 22305 Shuttle Driver Set Screw for 12444
and 19406 (2)
1443J 24065 Hemmer Screw, for 120340 (2)
1443J 24061 Piping Attachment Screw for 35245...
1480D 22332 Belt Guard Retaining Screw for
126365
1513J 22305 Peed Lifting Rock Shaft Screw Center
Nut for 56814 (2)
1513J 22305 Peed Rook Shaft Screw Center Nut for
56814 (2)
1518J 22303 Peed Connecting Link Hinge Screw Nut
for 43993 (2)
1518J 22303 Peed Porked Connection Hinge Screw
Nut
1518J 22303 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw Nut
1518E 22305 Oscillating Shaft Crank Slide Block
Screw Stud Nut for 19447 and
44135
1519J 22305 Peed Bar Screw Center Nut for 56813
(2)
1520J 22306 Presser Bar Lifter Screw Nut
1521J 22305 Lifting Lever Connecting Rod Lock Nut
for 139626 and 139627
156 OC 22304 Tension Regulating Thumb Nut for
44141
1562J 22333 Bobbin Winder Tension Regulating
Thumb Nut for 27308
1566D 24060 Binder Guide (lower) Thumb Nut for
26694
1577D 22912 Binder Polder Guide (upper) Thumb
Nut for 25650, 25653 and 25656..
1619E 22303 Crank Connecting Rod Hinge Screw Nut.
1620J 22333 Bobbin Winder Prame Hinge Screw Nut
for 27647 and 27875
1621J 24068 Ruffler Rviffling Blade Lever Adjust
ing Thvunb Screw Nut for 26724....
1640C 24068 Ruffler Driving Lever Spring Adjust
ing Nut for 26724 -

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 49

No. Plate Name

1813 22305 Feed Lifting Rook Shaft Creuik Roller
and Stud for 1237G
1852 22337 Guide Roller for 28658
1904 22306 Needle Bar Connecting Stud Roller
(roller only) for 12384
1943 24068 Ruffler Needle Clamp Roller for 26719
1943 24069 Tucker Needle Clang? Roller for 26719
2020 22303 Clamp Stop Motion Clamp Washer for
3022
^
2022 Clamp Stop Motion Flanged Bushing Pin
2049 Feed Lifting Rock Shaft Crank (back)
Pin, obsolete
2049 Oscillating Shaft Crank Pin
2049 Shuttle Driver Pin
2062 24077 Presser Bar Lifter, obsolete, use
52016
2102 23253 Bobbin Winder Tension Disc for
225462 (2)
2102 22304 Tension Disc, for 44118 (2)
2106 22333 Bobbin Winder Tension Thread Guide
for 27308
2135 22303 Balance Wheel (stand) heavy rim,
2 l/2 in. pulley, for 3022
2301 24068 Ruffler Ruffling Blade Lever Disen
gaging Lever Stop Pin for 26724.
2362 24072 Hammer Folder Disengaging Lever Stop
Pin for 28682
2362 24072 Hemmer Folder (left) Steady Pin for
28682
2419 22317 Shuttle Race Back for 24325
2455 22333 Bobbin Winder Tension Disc for 2730S
(2)
2531 22307 Shuttle Race Back, for 24415
2532 24077 Presser Foot Hinge Pin for 20311 and
20346, obsolete
2532 22307 Shuttle Race Back Position Pin for
24962 and 24999 (2)
2533 22307 Shuttle Race Back Spring for 24325
and 24415
2763 22338 Rock Shaft for 139633
2765 22338 Rock Shaft Knee Arm for 2768
2766 22338 Rock Shaft Knee Arm Hub vith 356C fo
2768
2767 22338 Rock Shaft Knee Plate with 356C for
2768
2768 Rock Shaft Knee Arm complete, for
139624 and 139625, Nos. 2765 to
2767
2770 22338 Rock Shaft Stop Dog with 140219C,for
139633
2862 Balance Wheel (stand) heavy rim, 3
in. pulley for 3022
2921 24077 Tension Disc, obsolete (2)
2923 24077 Tension Spring, obsolete
2973 22306 Shuttle Bobbin Case Latch Lever, for
15141 and 20650
2974 22306 Shuttle Bobbin Case Latch Lever
Fulcriim Pin for 15141, and 20650
2975 22306 Shuttle Bobbin Case Latch Spring, fo
20756, 24074 and 62740
2996 22306 Shuttle Bobbin, for 19292...
3022 22303 Clamp Stop Motion complete, Nos. 248A,
256J, 2020 and 4933

From the library of: Superior Sewing Machine & Supply LLC
 50 NUMERICAL LIST OF PARTS

No. Plate name

3023 Clamp Stop Motion Flanged Bushing,
for 4933 and 56627
3033 24077 Feed Connecting Link, obsolete, use
52165
3039 22303 Peed Regulator for 56886
3043 24077 Peed Lifting Rock Shaft Crank (back)
with 462AL, for 12375
3094 22303 Thread Take-up Crank Vedge
3146 25249 Binder Thmnb Screw Washer for 121168.
3146 22337 Guide Thumb Screw Washer for 25873..
4302 22306 Needle Bar Thread Guard
4303 22306 Needle Clamp with 808P
4307 22304 Shuttle Race Slide Spring, for 12432.
4370 Balance Wheel (stand") heavy rim,
2 3/4 in. pulley, with two 448AL.
4784 22303 Oscillating Rock Shaft Oil Pad for
24105
4822 24059 Wrench for 1521. (Attachments and
Accessories)
4933 22303 Clamp Stop Motion Flanged Bushing
3023 with two 462AL for 3022....
5596 22305 Bell Crank, for 56848
5598 22305 Bell Crank conqjlete, for 139626 and
139627, Nos. 5735 and 56848
5599 22305 Bell Crank Bracket for 56848
5601 22305 Bell Crank Hinge Pin for 56848
5735 22305 Bell Crank Spring, for 5598
5960 22335 Bobbin Winder Friction Wheel O-eather)
for 12171, 12201 and 203O8
5961 22335 Bobbin Winder Friction Wheel Washer,
for 12171, 12201 and 20308
5963 22335 Bobbin Winder Sprindle Flange for
12171, 12201 and 20308
6337 22338 Rock Shaft Lifting Bracket with two
356C, for 139633
7071 24060 Binder Guide (upper) Screw Washer
for 26694 (2)
7071 24061 Binder Folder Screw Washer for 26250,
26402,28678,28776,120437 and
120459
7071 22912 Binder Pressure Spring Screw Washer
for 25650, 25553, 25656 and
26694
7071 24061 Binder Ribbon Tension Screw Washer
for 26250, 26402, 120127, 120437
and 120459
7071 22337 Guide Thumb Screw Washer for 120428..
7298 24064 Presser Foot Hinge Pin for 19336,
20270 and 120144
7336 22304 Thread Take-up Spring Regulator for
44118
7539 22338 Rock Shaft Hanger with two wood
screws 1 in. No. 10 F.H. for
139625 (2)
7806 22918 Binder Folder Screw Washer for
120127
8418 22343 Belt Guard Button, for 8420
8419 22343 Belt Guard Button.Washer (leather)
for 8420
8420 Belt Guard Button 8418 with 8419 and
wood screw 1 1/4 in. No. 9 R.H.B.
8511 24077 Thread Take-up Spring, obsolete
8582 22307 Arm Dowel Pin

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 51

No, Plate Name

8879 22307 Arm Spool Pin Washer (cloth)
8879 23249 Tape Reel Disc Pin Washer (cloth) for
121412
8908 24059 Wrench for 1519, 1520 and 1620
(Attachments and Accessories)...
8909 24059 Wrench for 1513 and 1518 (Attach
ments sind Accessories)
9331 22332 Belt Guard Extension Screw Washer,
for 126365
9558 24060 Binder Folder Steady Pin for 26695.
9780 24060 Binder Guide (lower) Stud for 26696.
10141 22333 Bobbin Winder Tension Spring for
27308
11119 22307 Arm Oil Tube with 52045, for oiling
12408
11167 22306 Presser Bar Spring (light) .051 wire
Note : No. 11167 i s sent with these machines
unless another Spring is specified on order.
11170 22306 Presser Bar Spring Washer
11204 22306 Thread Take-up Lever Link Hinge Pin
for 43990
11241 22333 Bobbin Winder Spool Pin Washer
(cloth) for 27308
12139 Presser Bar Spring (medium) .055 wire
12142 24075 Presser Foot for 12455, 12468, 12481,
20158, 20471, 43978 and 44156...
12143 22306 Presser Foot for 44252 and 44253...
12144 24075 Presser Foot for 12455, 12468, 12481
20147, 20158, 20471, 43978 and
44156
12150 22304 Face Plate Thread Guard (lower) with
12152, for 20058
12152 22304 Face Plate Thread Guard (lower) Rivet
for 12150
12152 24072 Hemmer Slide Spring Cover Rivet for
28682 (2)
12166 22306 Thread Take-up Lever Hinge Pin for
12410
12168 22335 Bobbin Winder Bracket for 12172,
12202 and 20309
12169 22335 Bobbin Winder Frame for 12171 and
12201
12170 22335 Bobbin Winder Spring for 12172, 1220
and 20309
12171 22335 Bobbin Winder Frame complete, for
12172, Nos. 333D, 5960, 5961,
5963, 12169 and 15077
12172 22335 Bobbin Winder complete 3 for 4370,
Nos. 32D,180F,12168,12170,12171.
12193 22307 Arm Side Cover
12201 22335 Bobbin Winder Frame complete, for
12202, Nos. 333D, 5960, 5961,
5963, 12169 and -15077
12202 22335 Bobbin Winder complete, for 2135 and
2862, Nos. 32D, 180F, 12168,
12170 and 12201
12237 22305 Lifting Lever with 448AL,for 139626
and 139627
12240 22305 Lifting Lever Pin for 139626 and
129627
12241 22306 Lifting Lever Link for 139626 and
139627
12242 22338 Rook Shaft Hanger (front) with two
wood screws 1 in. No, 10 P.H. for
139624

From the library of: Superior Sewing Machine & Supply LLC
 52 NUMERICAL LIST OF PARTS

No. Plate Name

12258 24075 Presaer Foot (vide) for 44252 and
44253
12259 24075 Ppesser Foot for 12455, 12468, 12481,
20158,20471,43978 and 44156
12260 24075 Presser Foot for 12450, 12455, 12468,
12481, 20147, 20158, 20348, 20471,
43978 and 44156
12261 24075 Presser Foot for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....
12327 22306 Presser Bar Lifting and Releasing
Lever Bracket
12329 22304 Tension Releasing Lever Spring
12335 24075 Presser Foot (narrov) for 44252 and
44253
*12355 Arm with 15404 and two 15405
12357 22303 Arm Shaft Flanged Bushing (hack)
12358 22303 Balance Wheel (power) light rim,
2 3/l6 In. pulley, with two 44aAL
•12360 Bed
12361 24059 Machine Hinge Connection (Attachments
and Accessories) (2)
12368 22305 Feed Bar
12369 24077 Peed Dogj for cloth, 12 teeth (12
teeth to the Inch) obsolete,
superseded by 44252, not Inter
changeable
12370 24062 Peed Dog, 15 teeth (16 teeth to the
Inch) for 28775, for 28776
12374 24077 Peed Lifting Rock Shaft for 12375,
obsolete
12375 24077 Feed Lifting Rock Shaft complete, Nos.
3043, 12374 and 12376, obsolete
use 44126
12376 22305 Feed Lifting Rock Shaft Crank with
157J and 1813, for 12375 and
44126
12379 22305 Peed Rock Shaft for 20333
12381 22306 Needle Bar (hollow)
12384 22306 -" " Connecting Stud with 453AL
and 1904, for 43997
12388 22303 Oscillating Rock Shaft Hinge Pin for
24105 '
12389 22305 Oscillating Shaft
12391 22306 Presser Bar (hollow)
12393 22306 Shuttle Body for 19292
12398 22304 Tension Releasing Lever Hinge Pin....
12399 Thread Retainer complete, Nos. 12400
to 12402, obsolete, use 52379....
12400 24077 Thread Retainer Sleeve, for 12399,
obsolete
12401 24077 Thread Retainer Spring for 12399,
obsolete
12402 24077 Thread Retainer Stud for 12399,
obsolete
12403 24077 Arm Spool Pin and Thread Eyelet,
obsolete, use 52239
12404 22306 Thread Take-up Crank for 43990
12408 22306 Thread Take-up Lever for 12410
12409 22306 Thread Take-up Lever Link for 12410.
12410 Thread Take-up Lever complete, for
43990, Nos. 12166, 12408 and
12409

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 53

Ho. Plate Name

12411XC 24077 Throat Plate, large needle hole, for
12369 and 12457, obsolete, super
seded by 44256, not Interchange
able
12415 22305 Lifting Lever Connecting Rod for
139626 and 159627
12416 22305 Lifting Lever Connecting Rod Joint
for 139626 and 139627
12424 22305 Oscillating Shaft Crank Slide Block
Cap Screv Washer for 19449
12427 22303 Arm Shaft, for 44122
12430 24077 Peed Lifting Rock Shaft Crank Con
necting Rod vlth two 966E,
obsolete, use 43976
12431 22304 Shuttle Race Slide for 12432
12432 22304 Shuttle Race Slide complete, Nos.
4307, 12431 and two 725J
12444 22305 Shuttle Driver vlth tvo 1266AL, for
31-15 Machine
12449XC Throat Plate, small needle holey for
12369 and 12457, obsolete super
seded by 44255, not interchange
able
12450 24069 Peed Dog, 11 teeth (18 teeth to the
inch) for 12451 and 12464,for
26655 and 35175
12451XC 24069 Throat Plate, small needle hole, for
12450 and 20340, for 26655 and
35175
12453 22307 Arm Oil Tube, for intermediate bear
ing
12454 22307 Arm Oil Tube vlth 132590, for oiling
12409
12455 24070 Peed Dog, 13 teeth (14 teeth to the
Inch) for shirt vork, beveled for
hemmer, for 31-15 Machine, for
12456 and 20398
12456XC Throat Plate, small needle hole, for
31-15 Machine for 12455
12457 24077 Peed Dog, for cloth, 16 teeth (16
teeth to the inch) obsolete,
superseded by 44253, not inter
changeable
12459 24077 Oscillating Rock Shaft Hinge Pin Oil
Hole Stop Screv Washer (leather)
obsolete
12464XC 24067 Throat Plate, large needle hole, for
12450 and 20348, for 26655 and
35175
12467 24075 Presser Foot, for umbrella vork
12468 24070 Peed Dog, 16 teeth (16 teeth to the
inch) for shirt vork, beveled for
hemmer, for 51-15 Machine, for
139616 and 139617
12469XC 24077 Throat Plate, large needle hole, for
12468 and 20471, obsolete use
139616
12470XC Throat Plate, small needle hole, for
12460 and 20471, obsolete use
139617
12474 24075 Presser Poot for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....
12480 22305 Arm Slide Cap

From the library of: Superior Sewing Machine & Supply LLC
 54 NUMERICAL LIST OF PARTS

No. Plate Heime

124B1 24067 Peed Dog, 18 teeth (16 teeth to the
Inch) for 12482 and 12483
12482XC 24067 Throat Plate, large needle hole for
12481 and 43978
12483XC Throat Plate, small needle hole, for
12481 and 43978
13710 23253 Bobbin Winder Tension Spring for
225462
14010 22309 Bed Frame Hinge Plate Rivet for 20067
(6)
15072 22335 Bobbin Winder Bobbin Position Pin
for 15077 and 27538
15077 22335 Bobbin Winder Spindle with 15072, for
12171, 12201 and 20308
15098 24077 Shuttle Tension Spring for 24074
15140 22306 Shuttle Bobbin Case Latch for 15141.
15141 Shuttle Bobbin Case Hinge for 24074
and 62740, Nos. 2973, 2974 and
15140
15278 22306 Shuttle Tension Spring for 62740
♦15404 Trade Mark, for 12355
15405 " " Rivet, for 12355 (2)
16555 22309 Bed Frame Hinge Plate for 20067 (2)..
18055 24072 Presser Foot Hinge Pin for 28691..,.
19131 22316 Shuttle Bobbin for 20758
19219 22309 Bed Frame Cushion (leather) for 20067
. (i)
19220 22309 Bed Frame Cushion Spring for 20067
(4)
19221 24059 Wrench, for 936 and 1619 (Attachments
and Accessories)
19223 24075 Presser Foot Shank for 20311
19226 22309 Bed Frame Hinge Connection for 19398
(2)
19292 22306 Shuttle, 1 11/16 in. diam., for 31-15
Machine, Nos. 2996, 12393, and
62740
19334 24075 Presser Foot Plate for 19336
19335 24064 Presser Foot Shank for 19336 and
120144
19336 24075 Presser Foot (hinged) complete, for
12455, 12468, 12481, 20158, 20471,
43978 and 44156, Nos. 7298, 19334
and 19335
19397 22309 Bed Frame Hinge Connection Cap for
19398 (2)
19398 Bed Frame Hinge Connection 19226 vlth
21LE and 19397 (2)
19406 22315 Shuttle Driver with two 1266AL, for
31-20 Machine
19412XC 24060 Throat Plate, large needle hole, for
31-20 Machine, for 20147 and
44177
19413XC Throat Plate, small needle hole, for
31-20 Machine, for 20147 and
44177
19418XC Throat Plato, large needle hole, for
31-20 Machine, for 20158 and
44156
19419XC Throat Plate, small needle hole, for
31-20, for 20158 and 44156
19447 Oscillating Shaft Crank complete,
Nos. 457AL, 1518E, 19449 and
19496

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 55

No. Plate Name

19448 22305 Oscillating Shsift Crank Slide Block
for 19449
19449 Oscillating Shaft Crank Slide Block
complete,for 19447 and 44135, Noa.
226J, 988C, 12424 and 19448
19474 22916 Peed Dog, 14 teeth (16 teeth to the
inch) for 19475, 24572 and 26401
for 26402, 35241 and 35325
19475XC 22943 Throat Plate, large needle hole, for
19474, for 35241
19496 Oscillating Shaft Crank for 19447....
20020 24075 Presser Foot for 12455, 12468, 12481,
20158, 20471, 43978 and 44156
20023 Presser Bar Spring (heavy) .063 wire
20057 22304 Pace Plate, for 20058
20058 Pace Plate complete, Nos. 12150,20057
and 139615
20059 22306 Presser Bar Guide Bracket vith 453AL.
20060 22306 Slack Thread Regulator
20061 24077 Tension Screv Stud Bushing, ohsolete.
20062 24077 Tension Screv Stud Flange, obsolete..
20063 24077 Tension Screv Stud Flange Collar,
obsolete
20067 22309 Bed Frame with two each, 16555,19398,
four each 19219, 19220, six each,
14010 wood screws 1 1/4 in. Ho.12
and eight 158C
20147 24060 Peed Dog. 12 teeth (14 teeth to the
inch) for 31-20 Machine, for
19412 and 19413
20158 24060 Peed Dog. 16 teeth (16 teeth to the
inch) for shirt work, for 31-20
Machine, for 19418 and 19419
20188 22303 Needle Bar Crank with 85aAL and
1065AL, for 44122
20197 22303 Crank Connecting Rod vith two 896AL,
for 44189
20268 24075 Presser Foot Plate for 20270
20269 24075 Presser Foot Shank for 20270
20270 24075 Presser Foot (hinged) complete, for
44252 and 44253, Nos. 7298, 20268
and 20269
20283 22303 Peed and Peed Lifting Eccentric vith
446AL, for 44122
20284 22303 Feed Forked Coxmection for 43993....
20307 22335 Bobbin Winder Frame for 20308
20308 22335 Bobbin Winder Frame complete, for
20309, Nos. 333D, 5960, 5961,
5965, 15077 and 20307
20309 22335 Bobbin Winder complete, for 12358,
Nos. 32D, 180P, 12168, 12170 and
20308
20310 24075 Presser Foot Plate for 20311
20311 24075 Presser Foot (hinged) complete, for
12455, 12468, 12481, 20147, 20158,
20471, 43978 and 44156, Nos.1922^
20310 and 62527
20314 24077 Tension Releaser, obsolete
20333 Peed Rock Shaft complete, Nos. 12379
and 29635
20342 24075 Presser Foot for 12450,12455,12468,
12481, 20158,20348,20471,43978
and 44156

From the library of: Superior Sewing Machine & Supply LLC
 56 NUMERICAL LIST OF PARTS

Ho. Plate Name

20343 24075 Presser Foot with guide on bottom to
right of needle hole for 12450,
12455,12468,12481,20158,20348,
20471,43978,44156,44252 and 44253
20344 24075 Presser Foot Plate for 20346
20345 24075 Presser Foot Shank for 20346
20346 24075 Presser Foot (spring hinged) complete
for 12455, 12468, 12481, 20147,
20471 and 43978, Hos. 20344,20345,
26231 and 62527
20348 24067 Feed Dog. 22 teeth (36 teeth to the
inch) for chiffon, for 12451 and
12464
20398XC 24070 Throat Plate, large needle hole, for
31-15 Machine for 12455
20458 24075 Presser Foot, for 12455, 12468, 12481,
20158, 20471, 43978 and 44156....
20471 24070 Feed Dog. 22 teeth (22 teeth to the
inch) for shirt vork, beveled for
hemmer, for 31-15 Machine, for
139616 and 139617
20649 22316 Shuttle Bobbin Case Latch for 20650..
20650 Shuttle Bobbin Case Hinge for 20756,
Hos. 2973, 2974 and 20649
20654 22316 Shuttle Tension Spring for 20756....
20756 22316 Shuttle Bobbin Case complete, for
20758, Hos. 591F, 592E, 2975,
20650 and 20654
20757 22316 Shuttle Body, for 20758
20758 22316 Shuttle, 1 11/16 in. dlam., for 31-20
Machine, Hos. 19131, 20756 and
20757
23263 23249 Tape Reel Arm Steady Pin for 121412.
24009 22317 Shuttle Race Cap for 24998
24036 24077 Feed and Feed Lifting Eccentric
Sleeve, obsolete, use 127152
24074 Shuttle Bobbin Case complete, for
19292, Hos. 591P, 592E, 2975,
15098 and 15141, obsolete, use
62740
*24104 Oscillating Rock Shaft for 24105....
24105 22303 Oscillating Rock Shaft complete, for
139602, Hos. 4784,12388 and 24104
24131 22307 Arm Oil Tube with 52045, for oiling
20283
24297 22303 Balance Wheel Oil Cover for use with
2135 and 2862
24523 22317 Shuttle Bobbin Case Position Plate
for 24325
24324 22317 Shuttle Race Body for 24998
24325 22317 Shuttle Race conqjlete, for 31-20 Ma
chine, Hos. 907D, 2419, 2533,
24323, 24999 and two 391J
24412 22307 Shuttle Bobbin Case Position Plate
for 24415
24413 22307 Shuttle Race Body for 25000
24414 22307 Shuttle Race Cap for 25000
24415 22307 Shuttle Race complete, for 31-15 Ma
chine, Hos. 907D, 2531, 2533,
24412, 24962 and two 391J
24544 24075 Presser Foot Plate for 24546 and
24983
24545 24077 Presser Foot Shank, for 24546,
obsolete, use 24982

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 57

No. Plate Name

24546 24077 Presser Foot (spring hinged) complete^
for 12481 and 19474, Nos. 24544,
24545, 26231 and 62527, obsolete
use 24983
24572XC 24064 Throat Plate, small needle hole, for
19474, for 35325
24962 Shuttle Race Body 25000 with tvo
2532 or 24415
24982 24075 Presser Foot Shank for 24983
24983 24075 Presser Foot (spring hinged) conplete,
for 12455, 12468, 12481, 20158,
20471, 43978 and 44156, Noa.24544
24982, 26231 and 62527
24998 Shuttle Race Body, 24324 with 24009
and tvo 105^ for 24999
24999 Shuttle Race Body, 24998 with two
2532, for 24325
25000 Shuttle Race Body 24413 with 24414
and two 1053E, for 24962
25644 22912 Binder Bed with 25645 for 25650
25645 Binder Folder for 25644
25646 22912 Binder Folder Guide (lower) with
25855, for 25650, 25653 and 25656
25647 22912 Binder Folder Guide (upper) for
25650, 25653 and 25656
25648 22912 Binder Pressure Spring for 25650,
25653 and 25656
25650 22912 Binder (adjustable) Size 1, complete,
Nos. 334D, 1577D, 7071, 25644 and
25646 to 25648
25651 22912 Binder Bed with 25625 for 25653
25652 Binder Folder for 25651
25653 22912 Binder (adjustable) Size 2, complete,
Nos. 334D, 1577D, 7071, 25646 to
25648 and 25651
25654 22912 Binder Bed with 25655 for 25656
25655 Binder Folder' for 25654
25656 22912 Binder (adjustable) Size 3, cosiplete,
Nos. 334D, 1577D, 7071, 25646 to
25648 and 25654
25698 24060 Binder Folder for 26694
25703 24060 Binder Pressure Spring with 26698 for
26694
25705 22922 Binder on Shank, for 3/8 In. tape....
25706 22922 Binder on Shank, for 7/16 In. tape...
25707 22922 Binder on Shank, for 1/2 In. tape....
25708 22922 Binder on Shank, for 9/16 In. tape...
25709 22922 Binder on Shank, for 5/8 In. tape....
25710 22922 Binder on Shank, for 11/16 In. tape..
25711 22922 Binder on Shank, for 3/4 In. tape....
25712 22922 Binder on Shank, for 1^16 In. tape..
25713 22922 Binder on Shank, for 7/8 In. tape....
25714 22922 Binder on Shank, for 15/16 In. tape..
25715 22922 .Binder on Shank, for 1 In. tape
25721 24061 Binder Folder, for 26250
25722 24061 Binder Ribbon Tension complete, for
26250, 120437 and 120459, Nos.
26614, 26616 and four 26615
25733 22916 Binder Folder, for 1/2 In. binding,
for 26402
25734 22916 Binder Ribbon Tension complete, for
26402, Nos. 26617, 26618 and
seven 26486

From the library of: Superior Sewing Machine & Supply LLC
 58 NUMERICAL LIST OF PARTS
No. Plate Name
25855 Binder Polder Giiide (lower) Screw
Stud for 25646
25866 22337 Guide, for throat plate flush with
bed
25873 22337 Guide (combination)
25874 22337 Guide, for throat plate raised above
bed
25983 24061 Presser Foot, for 26250
25992 22946 Quilter Guide Holder with two 207F,
for 28660
26026 24059 Screw Driver (machine) Attachments
and Accessories
26231 24072 Presser Foot Spring for 20346,24546,
24983 and 28691
26250 24061 Binder (English) complete, Nos. 190J,
207F, 25721, 25722, 25983,
121444, 121445XC and two 7071....
26400 22916 Presser Foot for 26402
26401XC 22916 Throat Plate for 19474, for 26402...
26402 22916 Binder complete, for cut cloth, Nos.
207F, 19474, 25733, 25734, 2640Q
26401XC, two 190J and three 7071
26485 24059 Screw Driver (shuttle tension)
Attachments and Accessories
26486 Binder Ribbon Tension Pin (straight)
for 25734 and 28337
26603 24063 Feed Dog. 20 teeth, (16 teeth to the
inch) for 26605, for 35208,
35226 and 35863
26605XC 24063 Throat Plate, large needle hole for
26603 and 121446, for 35208,
35226, 35863 and 120207
26614 Binder Ribbon Tension Pin (bent) for
25722 and 120123
26615 Binder Ribbon Tension Pin (straight)
for 25722 and 120123
26616 Binder Ribbon Tension Plate for
25722
26617 Binder Ribbon Tension Pin (bent) for
25734 and 28337
26618 -*r Binder Ribbon Tension Plate for
25734
26652 Hemmer, for 3/32 in. hem, for 26655..
26653 Hemmer Shank for 26655, 26660, 26662,
26664 and 26666
26654 ^ Hemmer Rivet, for 26655, 26660, 26662,
26664 and 26666
26655 24074 Hemmer on Shank complete, Nos. 26652
to 26654
26656 24074 Presser Foot, for 26655
26659 Hemmer, for 26660
26660 24074 Hemmer on Shank complete, for 3/32
in. hem for umbrella work, Nos.
26653, 26654 and 26659
26661 Hemmer (wide) for 26662
26662 24074 Hemmer on Shank comolete, Nos. 26653,
26654 and 26661*.
26663 Hemmer, for 26664
26664 24074 Hemmer on Shank congplete, for raw
edge silk, Nos. 26653, 26654 and
26663
26665 . Hemmer, for l/8 in. hem, 26666
26666 24074 Hemmer on Shank complete, Nos. 26653,
26654 and 26665

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 59

No. Plate Name

26666 24068 Ruffler Driving Lever Spring for
26724
26669 24068 Ruffler Frame for 26724
26670 24068 Ruffler Guide (left) with 26679 and
two 662J for 26724
26671 24068 Ruffler Guide (right) with 26679 and
two 662J for 26724
26675 24068 Ruffler Ruffling Blade for 26724
26676 24068 Ruffler Ruffling Blade Clamp for
26724
26678 24068 Rixffler Ruffling Blade Lever Disen
gaging Lever for 26724
26679 24068 Ruffler Separating Blade for 26670
and 26671
26694 24060 Binder (adjustable) complete, for cap
fronts, for 31-20 Machine, Nos.
334J, 1566D, 25698, 25703, 26695
to 26697, two 152P smd three 7071
26695 24060 Binder Bed with 9558, for 26694.
26696 24060 Binder Guide (lower) with 1141D, and
9780, for 26694
26697 24060 Binder Guide (upper) for 26694.......
26698 24060 Binder Pressure Spring Lifting Button
for 25703
26718 24068 Ruffler Needle Clanqp Body for 26719.
26718 24069 Tucker Needle Clang) Body for 26719...
26719 24068 Ruffler Needle Clang) complete, for
26724, Nos. 1115P, 1943 and 26718
26719 24069 Tucker Needle Clang) complete, for
36561, Nos. IIISP, 1943 and 26718
26722 24068 Ruffler Driving Lever for 26724
26723 24068 Ruffler Ruffling Blade Lever for
26724
26724 24068 Ruffler (power) complete, with right
and left guides, with separating
blades and disengaging lever to
throTigh ruffling blade out of
action, Nos. 102J, 223J, 812B,
IIOIC, 1621J, 1640C, 2301, 26668
to 26671, 26675, 26676, 26678,
26719, 26722, 26723, «two 337J....
26795 24063 Corder Cord Guide, for 28645 and
120207
26796 24063 Corder Cord Guide Arm, for 28645 and
120207
27302 22333 Bobbin Winder Frame for 27647 and
27875
27303 Bobbin Winder Frame Spring for 27647
and 27875
27306 22333 Bobbin Winder Spool Pin for 27308...
27307 22333 Bobbin Winder Spool Stand for 27308..
27308 22333 Bobbin Winder Spool Stand coiig>lete,
for 27544 and 27876, Nos. 418E,
1562J, 2106, 10141, 11241, 27306,
27307 and two each 2455 and wood
screws 1 In. No. 10
27312 22333 Bobbin Winder Stop Latch for 27647...
27538 22333 • Bobbin Winder Spindle with 15072,for
27647 and 27875
27540 22333 Bobbin Winder Base for 27647 and
27875...
27541 22333 Bobbin Winder Pulley for 27647 and
27875

From the library of: Superior Sewing Machine & Supply LLC
 60 NUMERICAL LIST OF PARTS

Ko. Plat© Nam©

27S44 22333 Bobbin Winder (swinging automatic,
right hand) complete, for 31-15
Machine, Hos. 27308 and 27647....
27587 24066 Bobbin Winder Stop Latch for 27875..
27647 22333 Bobbin Winder, for 27544, Hos. 35D,
1620J, 27302, 27303, 27312, 27538,
27540, 27541, 50356D and two wood
screws 1 in. Ko. 7
27075 24066 Bobbin Winder, for 27876, Hos. 35D,
1620J, 27302, 27303, 27538, 27540,
27541, 27587, 50356D and two wood
screws 1 In. No. 7
27876 24066 Bobbin Winder (swinging automatic,
right hand) complete, for 31-20
Machine, Nos. 27308 and 27875....
28334 24062 Binder Polder, for 28678 and 28776...
28336 Binder Ribbon Tension Plate, for
28337
28337 24062 Binder Ribbon Tension complete, for
28678 and 28776, Nos. 26617,28336
and eight 26486
28612 24075 Presser Foot for plain stitching
28614 24075 Presser Foot for plain stitching
28619 24065 Binder (horn) on Shank for 28620
28620 24065 Presser Foot for 28619
28622 24075 Presser Foot (grooved) for cording...
28627 24072 Hemmer on Shank, for 1/8 in. to S/Q
In. gauges, for Marseilles quilts
28628 24072 Presser Foot for 28627
28632 22922 Binder on Shank, to tiirn edges under.
28635 22922 Binder on Shank, for 7/8 In binding..
28644 24067 Corder Cord Guide Bed for 28645
28645 24067 Corder (adjustable) complete, Nos.
190J, 1044D, 26795, 26796 and
28644
28649 24068 Bdge Folder on Shank
28650 24065 Hemmer on Shank, for hemming heavy
Canton flannel
28653 24074 Hemmer on Shank, for 2 9/I6 in. to 3
In. hem
28658 22337 Guide (roller) with 1852
28659 22946 Qullter Guide for 28660
28660 22946 Qullter congslete, Nos. 25992 and
28659
28671 24067 Hemstitcher
28673 24072 Lap Seam Feller (right hand) on Shahk;
to fold top only
28674 24072 Lap Seam Guide on Shank
28676 24062 Presser Foot for 28678 and 28776
28678 24062 Binder (English) complete, Nos. 193J,
7071, 28334, 28337, 28676, 121446,
121447XC and two 233J
28679 24072 Hemmer Bed with 28681, for 28688
28680 Hemmer Folder (left) for 28688
28681 Hemmer Polder (right for 28679
28682 24072 Hemmer Slide with 28687 and two each
2362 and 12152, for 28688
26683 24072 Hemmer Slide Cap (left) for 28688....
28684 24072 Hemmer Slide Cap (right) for 28688...
26685 24072 Hemmer Folder Disengaging Lever, for
28688
28686 24072 Hemmer Slide Spring for 28688
28687 24072 Hemmer Slide Spring Cover for 26682..

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 61

No. Plate Name

28688 24072 Hemmer complete)vlth lever for open
ing the folder and releasing the
hem, 30 that I t can be finished
vlthout removing the heramer from
the machine, for shirts, overalls
or similar closed articles, Nos.
94D, 28679, 28680, 28682 to 28686,
two 207P and three 233J
26689 24072 Presser Foot Plate for 28691
28690 24072 Presser Foot Shank for 28691
28691 24072 Presser Foot (spring hinged) complete,
for 28688, Nos, 19055, 26231,
28689 and 28690
28693 22922 Binder on Shank, for binding the arm
holes in cotton garments
28710 24068 Hemmer on Shank for l/8 in hem
28711 24065 Hemmer on Shank with 121843 for l/8
in. to 1/2 in. hem, for towels...
28715 24075 Presser Foot (tube) for laying
fringe-edged braid
28721 24068 Hemmer on Shank for 1 1/4 in. to 2
in. hem
28725 24075 Presser Foot Spring Guide for 28726.
28726 24075 Presser Foot (right hand, spring
guide) with 665J and 28725, for
1/32 in. to 1/4 in. gauges
Note; When ordering Nos. 28725 or 28726 state re
quired distance from edge of goods to seam.
28775XC 24062 Throat Plate, for 12370, for 28776...
28776 24062 Binder (English) complete, for
carpets, Nos. 193J, 7071, 12370,
28334, 28337, 28676, 28775XC and
two 233J
28970 24061 Binder on Shank for bias binding, to
turn both edges under
28971 22337 Guide for 120428
28972 22337 Guide Holder for 120428
29549 24077 Tension Heleasing Lever, obsolete....
29599 24077 Arm Oil Tube Packing (felt) for 11119,
12454 and 24131, obsolete
29633 22305 Feed Rock Shaft Crank with 157J, for
20333
32572 22304 Tension Releasing Disc for 44118....
32574 22304 Tension Releasing Pin for 44118
35002 22946 Presser Foot Extension for 35137
35003 22946 Presser Foot Graduated Adjustable
Guide (long, left) for 35137 and '
121949
35004 22946 Presser Foot Graduated Adjustable
Guide (long, right) for 35137 and
121949
35005 22946 Presser Foot Graduated Adjustable
Guide (short, right) for 35137
and 121949
35006 22946 Presser Foot Graduated Adjustable
Guide (short, right) flush for
35137
35062 24065 Binder (horn) on Shank, for 7/8 in.
to 1 1/2 in. binding, for tape,
for mattresses.
35063 24065 Presser Foot for 35062
35066 22943 Presser Foot for 28693, 35241, 35325
and 35863

From the library of: Superior Sewing Machine & Supply LLC
 62 NUMERICAL LIST OF PARTS
No. Plate Name
35002 24061 Binder on ShanJc, for raw edge Ijiaa
binding, for wrappers, etc
35134 22946 Fresser Foot with 36696, for 35137...
35135 22946 Presser Foot Graduated Adjustable
Ouide ClaiiQ) for 35137 and 121949.
35136 22946 Presser Foot Graduated Adjustable
Ouide Clarap Lever for 35137 and
121949
35137 22946 Presser Foot with Extension and
Graduated Adjustable Guides com
plete, Nos. 337B, 35002 to 35006
and 35134 to 35136
35175 24069 Edge Folder on Shank
35176 24069 Presser Foot for 35175
35208 24063 Binder on Shank, to turn in both
edges, for bias or straight bind
ing, for skirts, wrappers, shirt
waists, etc
35226 24064 Binder on Shank, for mattress work...
35231 24064 Presser Foot for 35226
35241 22943 Hemmer on Shank, for Canton flannel,
etc
35245 24061 Piping Attachment coiiQ>lete, for pip
ing house dresses, Nos. 1443J
and 120977
35325 - 24064 Binder on Shank, to turn top edge
only, for shirt bosoms, skirt
trimmings, etc
35475 24068 Hemmer on Shank for 5/32 in. hem,
with ri£^t hand lower guide, for
lace
35562 24067 Presser Foot for 28645
35610 22337 Guide Holder Friction Washer for
120428
35682 24073 Hemmer (foot) for l/8 in. hem with
guide on bottom to right of
needle hole
35710 24073 Hemmer (foot) for 3/32 in. hem, with
guide on bottom to right of
needle hole
35863 22943 Hemmer on Shank for canvas work
35997 24073 Hemmer (foot) for 3/16 In. hem with
guide on bottom to right of
needle hole
36072 24073 Hemmer (foot) for l/4 in. hem with
guide on bottom to rif^t of
needle hole
36122 24073 Hemmer (foot) for 7/32 in. hem
36182 24075 Presser Foot with 665J and 36183, for
blind stitch braiding, for
soutache braid
36183 24075 Fresser Foot Braid Guide for 36182...
Note: When ordering 36182 or 36183 send sair^le of
braid for which i t is to be used
36309 24073 Hemmer (foot) for 7/32 in. hem with
guide on bottom to ri^t of
needle
36413 24073 Hemmer (foot) plain bottom for l/l6
in. hem
36414 24073 Hemmer (foot) plain bottom for 3/32
in. hem
36416 24073 Hemmer (foot) plain bottom for 3/l6
in. hem

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 63

No. Plate Hame

36480 24073 Henmer (foot) plain bottom for 5/32
in. hem
36524 24073 Heaimer (foot) for 5/32 in. hem vith
guide on bottom to right of
needle hole
36561 24069 Tucker complete, Nos. 26719, 36655 to
36657, 36660, 36661, 36663, 36667,
120500, 120572 and tvo each 36658^
50238B and 86354
36576 24075 Fresser Foot Finger Guard for 36623..
36622 24075 Presser Foot, for 36623....
36623 24075 Fresser Foot 36622 with 36576 and tvo
50202J
36648 24069 Tucker Tuck Marker Rivet for 36663
(2)
36655 24069 Tucker Driving Lever for 36561
36656 24069 Tucker Driving Lever Hinge Stud for
36561
36657 24069 Tucker Driving Lever Look Spring for
36561
36658 24069 Tucker Driving Lever Lock Spring
Rivet for 36561 (2)
36660 24069 Tucker Tuck Guide for 36561
36661 24069 Tucker Tuck Guide Thumb Screv Washer
for 36561 ;
36662 24069 Tucker Tuck Marker (lower) for 36663.
36663 Tucker Tuck Marker (lower) 36662 with
36664 and two 36648, for 36561....
36664 24069 Tucker Tuck Marker (upper) for 36663.
36667 24069 Tucker Tuck Smoothing Spring for
36561
36696 22946 Fresser Foot Graduated Adjustable
Guide Clamp Steady Fin for 35134
and 121948
36776 24065 Hemmer on Shank for 2 l/4 in. to 3
in. hem
36818 24071 Finger Guard for 36821
36819 24071 Finger Guard Friction Washer for
36821
36820 24071 Finger Guard Holder with 196J for
36821
36821 24071 Finger Guard con^lete, Nos. 36818 to
36820 and 50316J
41400 24059 Machine Rest Fin (wood) 3 l/8 in.
long (Attachments and Accessories)
41828 22333 Bobbin Winder Spindle Collar Fin for
27538
41929 22343 Belt Guard for 41931
41930 22343 Belt Guard Hinge for 41931 (2)
41931 22343 Belt Guard complete, Nos. 8420,41929,
tvo 41930 and four wood screws
3/4 in. Ho. 9
43525 23249 Binder Steady Fin for 121398
43944 22304 Tension Releasing Lever
43945 22304 Tension Spring for 44118
43946 22304 Thresid Take-up Spring for 44118
43976 22303 Feed Lifting Rock Shsift Crank Con
necting Rod vith two 966E
43978 24067 Feed Dog. 24 teeth (22 teeth to the
inch) for 12482 and 12483
43990 Thread Take-up cojQ>lete, Nos. 775E,
11204, 12404, 12410 and 43997....
43993 Feed Forked Connection coiiQilete, Nos.
20284, 52165, 56886 .and two each
375C and 1518J

From the library of: Superior Sewing Machine & Supply LLC
 64 NUMERICAL LIST OF PARTS

No. Plate Name

43997 22306 Needle Bar Cotmectlsg Link vlth 794E
and 12384,for 43990
44118 22304 Tenalon oonrplete, Noa. 7336, 32572,
32574, 43945, 43946, 44141 and
two 2102
44122 Arm Shaft 12427 with 20188, 20283 and
127152, for 44189
44125 22305 Peed Lifting Rock Shaft for 44126...
44126 22305 Feed Lifting Rock Shaft complete,
Noa. 12376 and 44125
44134 22305 Oaclllatlng Shaft Crank for 44135....
44135 22305 Oaclllatlng Shaft Crank cojgilete.
Nob. 1518E, 19449, 44134 and tvo
453AL
44141 Tenalon Screw Stud 50327C with 1560C,
for 44118
44156 24060 Feed Dog. 24 teeth (24 teeth to the
Inch) for 31-20 Machine, for
19418 and 19419
44177 24060 Feed Dog. 19 teeth (22 teeth to the
Inch) for 31-20 Machine 19412 and
19413
44189 Arm Shaft 44122 with 20197
44212 24076 Drip Fan with four 1 In. wire nalla,
obaolete, uae 139622
44252 22304 Feed Dog, for cloth, 12 teeth (l2
teeth to the Inch)
44253 24067 Feed Dog. 16 teeth (16 teeth to the
Inch) for cloth, for 44255 and
44256, for 35245
44255XC 24067 Throat Plate, amall needle hole, for
44252 and 44253, for 35245
44256XC 22304 Throat Plate, large needle hole, for
44252 and 44253, for 35245
45720 Face Plate Thread Guard (upper) 45874
with 125373, obaolute, uae 139615
45874 Face Plate Thread Guard (upper) for
45720 and 139615
50190V 24063 Guide Thumb Screw (abort)
50202J 24075 Preaaer Foot Finger Guard Screw for
36623 (2)
50238B 24069 Tucker Tuck Guide Thumb Screw for
36561
50238B 24069 Tucker Tuck Marker Clamping Plate
Thumb Screw for 36561..
50302J 24071 Finger Guard Holder Set Screw for
120497 and 120858
50316J 24071 Finger Guard Hinge Screw for 36821..
50327C 22304 Tenalon Screw Stud for 44141
50356D 22333 Bobbin Winder Frame Hinge Screw for
27647 and 27875
50429AL 24077 Thread Retainer Set Screw, obaolete..
50551J 22332 Belt Guard Set Screw for 126365
51097J 23249 Binder Thumb Screw for 121168
51097J 23249 Tape Reel Arm Thumb Screw for 121168.
51224J 22307 Arm Side Cover Thumb Screw
51224J 22304 Face Plate Thumb Screw
51224W 22337 Guide Thumb Screw for 120428
52016 22306 Preaaer Bar Lifter
52031 24064 Feed Dog, 19 teeth (22 teeth to the
Inch) for 52032, for 121801 to
121804, 121798 and 121848
52032X0 24064 Throat Plate, large needle hole) for
52031, for 121801 to 121804,
121798 and 121848

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 65

Ho. Plate Hame

52045 22307 Arm Oil Tube Packing (braided cotton)
for 11119 and 24131
52055 24063 Presaer Foot for 35208
52056 24061 Preaser Foot for 35245
52165 22303 Peed Connecting for 43993
52239 22307 Arm Spool Pin and Thread Eyelet
52378 24077 Thread Retainer Stud for 52379, ob
solete
52379 Thread Retainer complete, Hos. 5237B,
52398, 210958 and 210993, obso
lete
52398 24077 Thread Retainer Spring for 52379,
obsolete
52454 22304 Thread Retainer
56813 Feed Bar Screv Center 313C vlth 1519J
(2)
56814 Feed Lifting Rock Shaft Screw Center
307C vlth 1513J (2)
56814 ----- Peed Rock Shaft Screv Center 307C
with 1513J (2)
•56827 Clamp Stop Motion Flanged Bushing
3023 with 2560"
56848 Bell Crank 5596 with 5599 and 5601
for 5598
56686 Peed Regulator 3039 with 818D, for
43993
62527 24075 Presser Foot Hinge Pin for 20311,
20346, 24546, 24983 and 121946...
62740 22306 Shuttle Bobbin Case complete, for
19292, Noa. 591P, 592E,2975,15141
and 15278
86354 24069 Tucker Tuck SmootMng Spring Rivet
for 36561 (2)
120001 24077 Feed Dog (spiked teeth) 12 teeth (lO
teeth to the Inch) obsolete,
superseded by 121446, not Inter
changeable
120120 22918 Binder Polder with 665J and 120121,
for 120127
120121 22918 Binder Fold Guide for 120120
120122 Binder Ribbon Tension Plate for
120123
120123 22918 Binder Ribbon Tension congjlete, for
120127, Nos. 26614, 120122 and
six 26615
120124 22918 Feed Dog. 6 teeth (16 teeth to the
Inch) for 120126, for 120127
120125 22918 Presser Foot for 120127
120126XC 22918 Throat Plate for 120124, for 120127..
120127 22918 Binder (English) "complete,Hos. 220J,
7806, 120120, 120123 to 120126XC
and two each 190J and 7071
120143 24064 Presser Foot Plate for 120144
120144 24064 Presser Foot (hinged) complete, for
35208, 35241 and 35325, Nos.7298,
19335 and 120143
120206 24063 Corder Cord Guide Bed with 457AL, for
120207
120207 24063 Corder (adjustable) complete, for
short turns on cushions, Nos.
190J, 1044D, 26795, 26796 and
120206
120208 24063 Presser Foot (grooved) for 120207....
120338 24065 Hemmer for 120340

From the library of: Superior Sewing Machine & Supply LLC
 66 NUMERICAL LIST OF PARTS

No. Plate Kane

120339 24065 Henmer Shank for 120340
120340 24065 Hemmer (adjustable) on Shank, com
plete, for 1/2 In. to 2 in. hem,
Nos. 120338,120339 and tvo 1443J
120342 24059 Oiler (copper plated) with 120343
(Attachments and Accessories)...
120343 24059 Oiler Spout, 3 1/2 in. long for
120342
120427 22337 Guide Holder Shank for 120428
120428 22337 Guide (adjustable, hinged) complete,
Nos. 940W, 7071, 28971, 28972,
35610, 51224W and 120427
120433 22916 Binder Polder for 120437 and 120459
120434 22916 Peed Dog, 7 teeth (16 teeth to the
inch) for 120436, for 120437 and
120459
120435 22916 Presser Poot for 120437
120436X0 22916 Throat Plate for 120434, for 120437
and 120459
120437 22916 Binder (English) complete, for awn
ings, Nos. 190J, 207P, 25722,
120433 to 120436X0 and two 7071
120458 22918 Presser Poot for 120459
120459 22918 Binder (English) for slip covers and
general work, Nos. 190J, 207P,
25722, 120433, 120434, 120436X0,
120458 and two 7071....
120479 22946 Quilter Guide (left) for 120485
120480 22946 Quilter Guide (right) for 120485
120481 22946 Quilter Guide Bracket for 120482....
120482 filter Guide Bracket 120481 with
120483 and two 2090, for 120485..
120483 22946 Quilter Guide Disengaging Sleeve for
120482
120484 22946 Quilter Guide Disengaging Sleeve
Spring for 120485
120485 22946 Quilter complete, Nos. 602D, 120479,
120480, 120482 and 120484
120496 24071 Pinger Guard for 120498
120497 24071 Pinger Guard Holder with 50302for
120498 and 121335
120498 24071 Pinger Guard complete, Nos. 236J,
120496 and 120497
120500 24069 Tucker Prame for 36561
120536 23249 Tape Reel Disc, with 120538 and
120539..
120537 23249 Tape Reel Disc Pin for 121412
120538 23249 Tape Reel Disc Stud (wood) for 120536
120539 23249 Tape Reel Disc Stud Sleeve (brass)
for 120536
120572 24069 Tucker Tuck Marker Clamping Plate for
36561
120803 24073 Hemmer (foot for 1/8 in. hem
120804 24073 Hemmer (foot for 5/32 in. hem
120805 24073 Hemmer (foot for 3/I6 in. hem
120806 24073 Hemmer (foot for 1/4 in. hem
120807 24073 Hemmer (foot for 5/I6 in. hem
120837 24073 Hemmer (foot plain bottom, for l/s
in. hem. slotted for lace
120856 24071 Pinger Guard for 120859
120857 24071 Pinger Guard for 120860
120858 24071 Pinger Guard Holder with 50302J, for
120859, 120860 and 121619

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 67

No. Plate Name

120859 24071 Finger Ouard complete, Noa. 120856,
120858 and two 236J
120860 24071 Finger Ouard complete, Nos. 120857,
120858 and two 236J
120898 24073 Hemmer (foot) for l/l6 In. to 1/8 In.
hem, for China allk, etc
120911 24073 Hemmer (foot with shell hemmer) for
5/32 In. to 1/4 In. hem, for
China allk, etc
120938 24073 Hammer (foot) for 3/32 In. hem
120977 24061 Piping Attachment for 35245
121167 23249 Binder Folder on Shank,, for 121168...
121168 23249 Binder (transverse) on'Shank complete^
for folded or unfolded bias bind
ing, with tme reel, for general
work, for 3A in.* VQ in. and
1 In. tape, Noa. 3146,120536,
121167, 121169, 121397, 121398XC,
121412 and two 51097J
121169 23249 Presaer Foot for 121168
121334 24071 Finger Guard for 121335
121335 24071 Finger Guard complete, Nos. 236J,
120497 and 121334
121397 23249 Feed Dog. 18 teeth (16 teeth to the
Inch) for 121398, for 121168
121398XC 23249 Throat Plate with 43525, for 121397,
for 121168
121412 23249 Tape Reel Arm with 8879, 23263 and
120537, for 121168
121444 24061 Feed Dog. 13 teeth (16 teeth to the
Inch) for 121445, for 26250
121445XC 24061 Throat Plate, for 121444, for 26250..
121446 24062 Feed Dog (spiked teeth) 13 teeth (10
teeth to the Inch) for 26605 and
121447, for 28678, 35226 and
120207
121447XC 24062 Throat Plate for 121446, for 28678
121618 24071 Finger Guard for 121619
121619 24071 Finger Guard complete, when machine
la fitted with a Roller Presaer,
Nos. 120858, 121618 and two 236J.
121758 24073 Feed Dog, 13 teeth (16 teeth to the
Inch) for 121759 for 121760
121759XC 24073 Throat Plate, small needle hole, for
121758 for 121760
121760 24073 Hemmer (foob) for I/8 In. hem for
hemming shirts, for 121758 and
121759
121761 24073 Hemmer (foot) for 1/8 In hem, for
hemming shirts
121762 24073 Hemmer (foot) for 5/32 In. hem, for
hemming shirts
1S1798 24064 Hemmer (foot) for 1/8 In. hem, for
hemming shirts, for 44252, 44256,
52031 and 52032
121801 24064 Hemmer (foot) for 1/8 In. hem, for
henmlng shirts, for 44252, 44256,
52031 and 52032
121802 24064 Hemmer (foot) for 5/32 In. hem, for
hemming shirts, for 44252, 44256,
52031 and 52032
121803 24064 Hemmer (foot) wide folder, for 3/I6
In. hem, for hemming shirts, for
44252, 44256, 52031 and 52032....

From the library of: Superior Sewing Machine & Supply LLC
 68 NUMERICAL LIST OF PARTS

Wo. Plate Name

121804 24064 Hemmer (foot) narrov folder, for 3/16
In. hem, for hemming shirts, for
44252, 44256, 52031 and 52032....
121843 Hennner for 28711
121848 24064 Hemmer (foot) for 3/32 In. hem, for
hemming shirts, for 44252, 44256,
52031 and 52032
121941 24075 Presser Foot for No. 5 Slide Fastener,
for stitching at right or left of
slide fastener, for heavy woolen
suiting and dresses, for 12455,
12468, 12481, 20158, 20471, 43978
and 44156
121943 24075 Presser Foot Plate for 121946
121944 24075 Presser Foot Shank for 121946
121945 24075 Presser Foot Spring for 121946
121946 24075 Presser Foot complete, for Ho. 5
Slide Fastener, for stitching at
right or left of slide fastener,
for crossing seams, for 12455,
12468, 12481, 20158, 20471, 43978
and 44156, Nos. 62527 and 121943
to 121945
121948 24075 Presser Foot with 36696, for 121949..
121949 24075 Presser Foot with Graduated Adjust
able Guides congjlete, for No. 3
and No. 5 Slide Fastener, for
making various margins up to 1/2
inch between the slide fastener
and the line of stitching, for
12455, 12468, 12481, 20158, 20471,
43978 and 44156, Nos. 337B, 35003
to 35005, 35135, 35136 and 121948
125373 Pace Plate Thread Guard (upper) Rivet
for 45720
125424 22304 Face Plate Thread Guard (upper) Rivet
for 139615
126356 22332 Belt Guard for 126365
126365 22332 Belt Guard Bracket for 126365
126364 22332 Belt Guard Extension for 126365
126365 22332 Belt Guard (adjustable) complete, for
Bench Stand, Nos. 162D, 1480D,
9331, 50551J, 126356, 126363,
126364, and two wood screws 1 In.
No. 10
127152 22303 Peed and Feed Lifting Eccentric
Sleeve, for 44122
127312 22338 Rock Shaft Hanger (back) with two
wood screws 1 in. No. 10 P.H.,
for 139624
132590 22307 Arm Oil Tube Packing (braided cotton)
for 12454
139602 Oscillating Rock Shaft 24105 with
9080
139615 22304 Pace Plate Thread Guard (upper) 45874
with 125424, for 20058
139616XC 24070 Throat Plate (large needle hole) for
31-15 Machine, for 12468 and 20471
139617XC Throat Plate (small needle hole) for
31-15 Machine for 12468 and 20471
139622 22341 Drip Pan with four 1 in. wire nails..
139623 22338 Rock Shaft Lifting Bracket Hook for
139633

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 69

No. Plate . Name

139624 22338 Rock Shaft complete^for 139626, Nos.
2768, 12242, 127312 and 139633...
139625 22338 Rook Shaft complete, for 139627, Nos.
2768, 139633 and two 7539
139626 Knee Lifter complete (power table)
Nos. 76D, 766E, 802D, 1521J, 5598,
12237, 12240, 12241, 12415, 12416,
139624 and two 178E
139627 Knee Lifter complete (individual
motor and foot power stands) Nos.
76D, 766E, 802D, 1521J, 5598,
12237, 12240, 12241, 12415, 1241^
139625 and two 178E
139631 Balance Wheel (power) "V" belt groove
(outside dlam. of belt groove 2.9
In.) with two 443AL
139633 Rock Shaft 2763 with 2770, 6337 and
139623, for 139624 and 139625....
140219C 22338 Rock Shaft Stop Dog Set Screw for
2770
200056E 23253 Bobbin Winder Stop Latch Screw for
259431 and 259462
200082D 23253 Bobbin Winder Tension Bracket Screw
for 259431 and 259462
200113P 23253 Bobbin Winder Brake Clamp Screw for
259431 and 259462
200299H 23253 Bobbin Wider Stop Latch Trip Lever
Hinge Screw for 259431 and
259462
200380C 23253 Bobbin Winder Pulley Set Screw for
225368 and 259461
201499B 23253 Bobbin Winder Tension Stud for
225461
201572B 23253 Bobbin Winder Tension Stud Thumb Nut
for 225462
202277 23253 Bobbin Winder Frame Oil Packing
(wick) for 225453
202478 23253 Bobbin Winder Stop Latch Trip Lever
for 259431 and 259462
210958 Thread Retainer Collar for 52379,
obsolete
210993 Thread Retainer Sleeve for 52379,
obsolete
225368 23253 Bobbin Winder Pulley with 200380C,
for 259431
225381 23253 Bobbin Winder Spindle for 259431 and
259462
225438 23253 Bobbin Winder Frame Oil Well Cap for
225453
225444 23253 Bobbin Winder Stop Latch for 259431
and 259462
225453 23253 Bobbin Winder Frame with 202277 and
225438 for 259431 and 259462
225454 23253 Bobbin Winder Frame Hinge Pin for
259431 and 259462
225455 23253 Bobbin Winder Frame Spring for 259431
and 259462
225456 23253 Bobbin Winder Frame Spring Plunger
for 259431 and 259462
225458 23253 Bobbin Winder Stop Latch Thiomb Lever
for 259431 and 259462
225459 23253 Bobbin Winder Stop Latch Thumb Lever
Hinge Stud for 259431 and 259462.

From the library of: Superior Sewing Machine & Supply LLC
 70 NUMERICAL LIST OF PARTS

Ho. Plate - Name

225459 23253 Bobbin Winder Stop Latch Thumb Lever
Joint Stud for 259431 and 259462
225461 23253 Bobbin Winder Tension Bracket with
201499B, for 225462
225462 23253 Bobbin Winder Tension Bracket com
plete for 259431 and 259462^ Nos.
13710, 201572B, 225461 and two
2102
228026 23253 Bobbin Winder Tension Bracket Screw
Washer for 259431 and 259462....
259428 23253 Bobbin Winder Brake (leather) for
259431 and 259462
259429 23253 Bobbin Winder Brake Clamp for 259431
and 259462
259430 23253 Bobbin Winder and Tension Bracket
Base for 259431 and 259462.......
259431 23253 Bobbin Winder (swinging automatic,
right hand) cooplete, for power
table, for round belt, Nos.
200056E, 200082D, 200113P,200299H,
202478, 225368, 225381, 225444,
225453 to 225456, 225458, 225462,
228026, 259428 to 259430 and two
each 225459 and wood screws 3/4
in. No. 12 R.H.B
259461 23253 Bobbin Winder Pulley with 200380C,
for 259462
259462 23253 Bobbin Winder (swinging automatic,
right hand) complete, for power
table, for "V" belt, No3.200056E,
200082D, 200113P, 200299H, 202478,
225381, 225444, 225453 to 225456,
225458, 225462, 228026, 259428 to
259430,259461 and two each 225459
and wood screws 3/4 in. No. 12
R.H.B

From the library of: Superior Sewing Machine & Supply LLC
 ILLUSTRATIONS
OF

PARTS

From the library of: Superior Sewing Machine & Supply LLC
 20188 966b 896aL
127152\« 12357 iltim

1518J 20197

1518J

210J :

24105
1518J 375c
BOO
1518JM 375c
/
4933 1^62AL 2020 ^ 256j IjUSAL
From the library of: Superior Sewing Machine & Supply LLC
 12432 LU256!tc

208&L
(&

44II8
/s

^ 1*39U5

From the library of: Superior Sewing Machine & Supply LLC
r
1519J
44135

44126 1518B

From the library of: Superior Sewing Machine & Supply LLC
 22306 - V2

11170 1120L\

i^aoj

62740

2975 15140 ^2e 2975 /

From the library of: Superior Sewing Machine & Supply LLC
 22307 - 2/3
2ltl3l

8879 r

24415

1053E

From the library of: Superior Sewing Machine & Supply LLC
 158c 19220

From the library of: Superior Sewing Machine & Supply LLC
 fi

K>
KJ
OJl W

From the library of: Superior Sewing Machine & Supply LLC
 22316 - 1/2
31-20

11170

20060

1520J

20758
20756

592E 2975

19131
20757

From the library of: Superior Sewing Machine & Supply LLC
 22317 - 2/3
&5hE 7U8e 12^3 I2I45U 21431

520U5
132^0

8582 11119
12193

1053E

591J \v2Uoo9

From the library of: Superior Sewing Machine & Supply LLC
 22332 - 1/3

From the library of: Superior Sewing Machine & Supply LLC
 22333 - 2/3

y
112a

From the library of: Superior Sewing Machine & Supply LLC
 22335 - %

12168

20307

12170

12202

12170
12168

12169

15072
15077

12168
/

12169

15077 12170

From the library of: Superior Sewing Machine & Supply LLC
 22337 %

25874

From the library of: Superior Sewing Machine & Supply LLC
 22338 - Vs

139624
2770
2766

6337

m0219C

127312

2767

139625

356C

2770

7539 7539

356C

2767

From the library of: Superior Sewing Machine & Supply LLC
 22341 - ^3
31-17

From the library of: Superior Sewing Machine & Supply LLC
 22343 -1/2

in
c u u u u o
. ca a

From the library of: Superior Sewing Machine & Supply LLC
 22912 - 2/3
25650

25647

25653
25648 7071 "4J

From the library of: Superior Sewing Machine & Supply LLC
 22916 -.2/3
26402
A

26401XC
25734
19474 7F 7071
rr

7071
26400

120437
-A-

120436XC

/ 7071
25722
120434
207F

. '
i
7071

190J
120435
120433

From the library of: Superior Sewing Machine & Supply LLC
w *
 22918 - 2/3
120459

120127

120125 665
S 120121 ^

120120

From the library of: Superior Sewing Machine & Supply LLC
 m::

From the library of: Superior Sewing Machine & Supply LLC
 22943 - %

35241

120143

35066 19475XC

26605XC

35066

From the library of: Superior Sewing Machine & Supply LLC
 22946 - 2/3
120485
120479

120U84

120403 -209AL

209AL
120480
120481

28660
A

/207F
28659

35137

35136

/y^^~36696
28953
35135
35002

35004 35005

From the library of: Superior Sewing Machine & Supply LLC
 I2II68

From the library of: Superior Sewing Machine & Supply LLC
 23253 - 3/8
•31 259428
235^58259429/
1 / / 225368

200056E —
200380c

259462

A
259^1

200082D

13710 1
201572B

225462

From the library of: Superior Sewing Machine & Supply LLC
 24059 - %

From the library of: Superior Sewing Machine & Supply LLC
 24060 - %

3.9112XC

20147

19418X0

44156

26694

25698 / \
1141D 1566D

From the library of: Superior Sewing Machine & Supply LLC
 24061 - %
26250

fJi

From the library of: Superior Sewing Machine & Supply LLC
I

From the library of: Superior Sewing Machine & Supply LLC
120208 121^6 26605 •69IXC
26605XC

10-1

208AL

10
^IXC
o
o
120207 OJ

120206
26795
50i90ir

iai4i;D
5019CW
190J
From the library of: Superior Sewing Machine & Supply LLC
26796
 2/f064 - 1/2

26605XC
12iuy6 26603

From the library of: Superior Sewing Machine & Supply LLC
 24065 - Vz
?8620
28619

28711

36776

28650

120340

120339
1««3J

From the library of: Superior Sewing Machine & Supply LLC
 24066 - %
3l-20l
27876

27541
41828
15072

27538

27587

1620J

50356D 27540

27308

r5
10141
2455

2106

1562J

418E

27307
11241

From the library of: Superior Sewing Machine & Supply LLC
 24067 - %

44255XC 32464XC
20348

44253

#
iO I 12450

28671 12481 12482XC

43978

28645
35562
jCJ
28644
. \ 26796

1044D

From the library of: Superior Sewing Machine & Supply LLC
r-

24068 - 2/3
26649

28710

35475

28721

26724
26669 ItZ 26678

26670

2301

6668 26719
26722
26679 1943

IIOIC

1640C
26718
26676
26671 H15F
662J 1<521J/ '26723
8128

From the library of: Superior Sewing Machine & Supply LLC
 24069 - 2/3
36561

26719

1115P

6^ \
120^

From the library of: Superior Sewing Machine & Supply LLC
 24070 - %
31-151

139616XC

12U68 204"'l

20398XC

12455

From the library of: Superior Sewing Machine & Supply LLC
 24071 - %

36821 120498
50302J
236J
50316J 196J

36819
36820 120497

120496
36818

120859 120860
120838
120858 -~^,gja^50302J
50302J

120857
120836

I2I335 I2I6I9
30302J
50302J

236J 120858/
120497

236J

121334
121618

From the library of: Superior Sewing Machine & Supply LLC
 24072 - 2/3

H8628

28691

From the library of: Superior Sewing Machine & Supply LLC
 24073 - %
120803 120938 1208(ii 361^ 120^

120606 120807 35710 35^ 5652U

r

39997 36509 56072 12C^8 36104

36IO.3 120911 36480 36U16 120857

121760
121761 121762

208AL

From the library of: Superior Sewing Machine & Supply LLC
 24074 - 2/3

26655 12i|50 12ti5lXC

26666

From the library of: Superior Sewing Machine & Supply LLC
 24075 - 1/2
12258 12335 12142 12144

12260 12474 20020 20342

2C458 12467
28612

I
121946 28715 28622 28726 36182
121945 665J
665J
28725
36183

^^121944
62527
" '\l21943
121949 19336 20270 20346
35136 20345
19335 20269
36696 26231\
337d 7298
-4
62527
19334 20268
20344
35004
35135
121948 24983
24982
121941 19223
26231\
V \r^
50202.'.r

36576
62527
20310 24544

From the library of: Superior Sewing Machine & Supply LLC
 24076 - 1/3

44212

From the library of: Superior Sewing Machine & Supply LLC
 24077 - 1/2
12375
157J 12376 2062 29599 12403 3033 12430

•X) ^ 1 gS: 74 966E

1813 II
120001

12411XC

12369 12457

12374

29549 24036 12469XC

20314 2921 20061

24546 20063 12402 52378 12400 2923

24545(5 ^ I' 1 ^
24544
62527

8511 15098 12459 878J 20062

12401

52398 430C 50429AL 460AL 2532 /

462AL
/
3043

From the library of: Superior Sewing Machine & Supply LLC
 SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.** " 1

. NeecHes in Containers marked

"FoVsiNGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 1

From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC