Thank you for purchasing my pattern!

Enjoy crocheting.
This pattern is a work of authorship and intends only for personal use!
I appreciate it if you do not share, reproduce or sell this pattern in its entirety or
in parts!

NOTEI
Please, note that this pattern does not include the lessons of
crocheting. You must have previous knowledge of crochet techniques.
You are welcome to sell the ready product made with this pattern, but
credit to @dorogina toys is appreciated. I would love to see your ready
toys through the hashtag #dorogina_toys.

ABBREVIATIONS (US):
MR- magic ring
CH - chain
SC - single crochet
INC - increase (make 2 sc into one loop)
HOC - half double crochet
DEC- decrease (two sc together through front loops)
SL ST- slip stitch
(... )*8 - work instructions within brackets as many times as directed
(18)- the number of sc in the row

THE REQUIRED MATERIALS:

DK weight yarn - Alize Cotton Gold {55% cotton/45% acrylic; 100 g/330m)

• Alize Cotton Gold No. 152, 62 (melange, white) - candle holders, candles
• Alize Cotton Gold No. 60, 187 (black, light yellow) - candle wick and flame
• 2.25 mm and 1.25 mm crochet hook
• Tapestry needle
• Scissors
• Stitch markers (a scrap of contrasting yarn)
• Thick cardboard for the saucer, candles, and the third candle holder.

2
• Wire for the handles of the candle holders - the length of three handles is 14
cm (5.5 inches)
• Pliers
• Adhesive tape for securing the wireframe
• Glue

NOTE! Yarn consumption, size, and appearance of the toy depend on

crochet density and how you hold the yarn.
The presented toy is crocheted with V and X look single crochet:
(First, you grab yarn over the hook, and for making the second stitch
grab it under the hook).
You may use any desirable crochet method.
The height of the candle holders without the flame using the materials
stated in this pattern is N9, 15, and 16 cm (3.5, 6, and 6.3 inches).

Make sure you crochet tight enough otherwise, the stuffing will show
through the holes.

You may use any different yarn brand and color.

ENJOY CROCHETING.

SAUCER (make 2)
(Suitable for the 1 st and 2 nd candle holders)

YARN - Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.
Rnd 1: 8 into MR
Rnd 2: Sine (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
--
Rnd 7: (5 sc, inc)*8 (56)
Rnd 8: (6 sc, inc)*8 (64)
Rnd 9: (7 sc, inc)*8 (72)
Rnd 10: (8 sc, inc)*8 (80)
Rnd 11: (9 sc, inc)*8 (88)
Rnd 12: (10 sc, inc)*8 (96)
Rnd 13: (11 sc, inc)*8 (104)
Rnd 14: (12 sc, inc)*8 (112)
Rnds 15-17: 112 sc (3 rounds)

Break yarn. Pull the central yarn tail into the right side.
Crochet the second part similarly - including the 15th round.
Trace around the second circle on the cardboard and cut it out. Iron the parts
with the steam through a damp cloth.

Put two parts together: the first part is on the bottom and the second part
is on the top. The right side is facing the wrong part. Insert the cardboard
template between the parts.

4
Crochet through both loops around -112 sc, 1 sl st.

Hide the yarn tail inside the saucer and cut the excess yarn.

CANDLE HOLDER No.1

YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Rnd 7: (5 sc, inc)*8 (56)
Rnds 8-19: 56 sc (12 rounds)
* Crochet the next round through back loops only.
Rnd 20: 56 sc
* Crochet the next rounds through both loops.
Rnds 21-31: 56 sc (11 rounds)
Rnd 32: (5 sc, dec)*8 (48)
Rnd 33: (4 sc, dec)*8 (40)
Rnd 34: (3 sc, dec)*8 (32)
Rnd 35: (2 sc, dec)*8 (24)

--
Rnd 36: (1 sc, dec)*8 (16)
Rnd 37: 8 dee (8)

Cut yarn tail 20 cm (7,8 inches) long.

Tighten the hole, grabbing 8 front loops with a tapestry needle.

th
After tightening the hole, fold the part to the 20 row, which was crocheted
through back loops.

Draw the yarn tail to the bottom of the candle holder and leave it for
sewing.

--
 CANDLE No.1
(The upper part)
YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: Sine (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Break yarn.

CANDLE No.1
(The bottom part)
YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: Sine (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
* Crochet the next round through back loops only.
Rnd 7: 48 sc
* Crochet the next rounds through both loops.
Rnds 8-29: 48 sc (22 rounds)

Trace around the part on the cardboard and cut it out. Insert the template
inside and stuff it with fiberfill.

--
 The candle should be even. Roll it on the table like a "sausage", so that the
fiberfill is evenly distributed.
Insert the candle into the candle holder, and make sure it does not tilt.
Complete stuffing or remove extra fiberfill if needed.
The upper part of the candle should be stuffed gently. The top should be
even.

Attach the upper part to the bottom part and crochet 48 sc through both
loops around.

Break yarn, leaving a tail 1.5 meters (60 inches) long.

Do not pull the yarn tail and crochet the wax edges.

8
 To do this, chain 10. Start crocheting in the second chain from hook - .(1
HOC in 1 stitch), 1 sc, 7 sl st, 1 sl st in the stitch on the candle.
Pull the yarn tail, thread the needle, and pierce the needle into the
direction of the next chain.
Make a loop through the upper row of the candle and chain.

* There is no definite sequence for the the wax edge alternation or length.
Adjust the number and length of chaiins to your taste.
The only rule is, after making the chain and starting crocheting in the
second chain from the hook on the other side of the chain, first work (3 HOC
in 1 stitch}, 1 sc and then continue crocheting (sl st - slip stitches} to the
remaining stitches to the end of the chain + 1 sl st in the stitch on the candle.
Start making the next chain using a tapestry needle.

9
 Once all chains are finished - pin them to the candle and sew with the yarn
tail or glue them.

FLAME
YARN -Alize Cotton Gold No. 01 - (cream). 1.25 mm crochet hook.
Before starting, cut the yarn strand 2 meters (80 inches) long and split it
into two strands.
Rnd 1: 4into MR
Rnd 2: 4 SC
Rnd 3: 4inc (8)
Rnd 4: 8 SC (2 rounds)
Rnd 5: (1 sc, inc)*4 (12)
Rnd 6: 12 sc
Rnd 7: (2 sc, inc)*4 (16)
Rnds 8-12: 16 sc (5 rounds)
Stuff with fiberfill.

10
Rnd 13: (1 sc, dec)*4 (12)
Stuff with fiberfill. Tighten the hole, grabbing 12 front loops with a tapestry
nee dle.
Hide the yarn tail inside the flame and cut the excess yarn.

Split black yarn into four threads and embroider stitches on both sides of
the part.

Draw the yarn to the bottom of the part. Tie the tails into a knot, leaving a
long tail for wrapping around the wireframe.

Prepare glue and wire 4-5 cm (1.5 - 2.0 inches) long.

11
 Insert the wireframe into the flame and wrap around it with the yarn.
Secure the yarn tail with a drop of glue.

HANDLE
(Suitable for the 1 st and 2 nd candle holders)

YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.
Rnd 1: 7 into MR
Rnds 2-13: 7 sc (12 rounds)
Cut yarn, leaving a long tail.
Prepare the wireframe in the length of the crocheted part - 4 cm (1.6
inches).
Wrap around the entire wireframe with adhesive tape.

12
 Insert the wireframe into the part. Tighten the hole, grabbing 7 front loops
with a tapestry needle.
Do not cut the excess yarn, leaving it for sewing. Bend the handle.

ASSEMBLY
1. Pin the handle to the candle holder and sew it with the yarn tail. Hide the
tail.

13
 2. Pin the candle holder in the center of the saucer and sew it with the yarn
tail. Hide the tail.

3. Insert the candle into the candle holder.

4. Insert the flame in the center of the candle.

14
 The first candle holder is finished!

CANDLE HOLDER No.2

YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Rnd 7: (5 sc, inc)*8 (56)
Rnds 8-27: 56 sc (20 rounds)
* Crochet the next round through back loops only.
Rnd 28: 56 sc
* Crochet the next rounds through both loops.
Rnds 29-47: 56 sc (19 rounds)
Rnd 48: (5 sc, dec)*8 (48)
Rnd 49: (4 sc, dec)*8 (40)
Rnd 50: (3 sc, dec)*8 (32)
Rnd 51: (2 sc, dec)*8 (24)
Rnd 52: (1 sc, dec)*8 (16)

15
Rnd 53: 8 dee (8)
Cut a long yarn tail 20 cm (7,8 inches) long. Tighten the hole, grabbing 8 front
loops with a tapestry needle.

After tightening the hole, hide the yarn tail inside the candle holder and cut
the excess yarn.
Fold the part to the 28th row, which was crochete d through back loops.

CANDLE HOLDER STICK

YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
* Crochet the next round through back loops only.
Rnd 5: 32 sc
* Crochet the next rounds through both loops.
16
Rnds 6-9: 32 sc (4 rounds), 1 sl st
Cut yarn, leaving a long tail for sewing.
Trace around the part on the cardboard and cut it out.

SAUCER (make 2)
Crochet two parts of the saucer following the pattern on pages 3-5.

CANDLE No.2
(The upper part)
YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.
Rnd 1: 8 into MR
Rnd 2: Sine (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Break yarn.

17
 CANDLE No.2
(The bottom part)

YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
* Crochet the next round through back loops only.
Rnd 7: 48 sc
* Crochet the next rounds through both loops.
Rnds 8-42: 48 sc (35 rounds)

Trace around the part on the cardboard and cut it out. Insert the template
and stuff with fiberfill.

Roll it on the table so that the fiberfill is evenly distributed.

Attach the upper part of the candle to the bottom part and crochet 48 sc
through both loops in a circle.

Cut yarn, leaving a long tail about - 1,5 meters (60 inches) long.
Make the wax edges as guided on pages 9-10.

18
 Pin all chains to the candle and sew them. You may glue the wax edges.

HANDLE
Crochet the candle holder handle as guided on pages 12-13 of the pattern.

19
 FLAME
Crochet the flame as guided on pages 10-12 of the pattern.

ASSEMBLY
1. Pin the handle to the candle holder and sew it.

2. Insert the cardboard template into the stick of the candle holder and
stuff it with fiberfill.
Pin the stick to the bottom part of the candle holder and sew it. Do not cut
the excess yarn and draw the tail to the bottom of the stick.

20
 3. Pin the candle holder to the center of the saucer and sew it. Hide the
yarn tail inside the saucer.

21
 4. Insert the candle into the candle holder.
5. Insert the flame in the canter of the candle.

The second candle holder is finished!

CANDLE HOLDER No.3

YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.
Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
* Crochet the next round through back loops only.
Rnd 5: 32 sc
Trace around the part on the cardboard and cut it out.
* Crochet the next rounds through both loops.
Rnds 6-45: 32 sc (40 rounds)

22
 Insert the cardboard template into the bottom of the part.
Stuff the part with fiberfill until you reach the 25 th round! Do not stuff the
part after the 25 th round, otherwise, the upper part will not fold inward.
* Crochet the next round through back loops only.
Rnd 46: 32 sc

* Crochet the next rounds through both loops.

Rnds 47-61: 32 sc (15 rounds)
Rnd 62: (2 sc, dec)*8 (24)
Rnd 63: (1 sc, dec)*8 (16)
Rnd 64: 8 dee (8)

Cut yarn, leaving a long tail. Tighten the hole using a tapestry needle. Hide
the tail inside.

23
 After tightening the hole, fold the part to the 46th row, which was crocheted
through back loops.

SAUCER (make 2)
YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Rnd 4: (2 sc, inc)*8 (32)
Rnd 5: (3 sc, inc)*8 (40)
Rnd 6: (4 sc, inc)*8 (48)
Rnd 7: (5 sc, inc)*8 (56)
Rnd 8: (6 sc, inc)*8 (64)
Rnd 9: (7 sc, inc)*8 (72)
Rnd 10: (8 sc, inc)*8 (80)
Rnd 11: (9 sc, inc)*8 (88)

24
Rnd 12: (10 sc, inc)*8 (96)
Trace around the part on the cardboard and cut it out.
Rnds 13-14: 96 sc (2 rounds)
Rnd 15: (11 sc, inc)*8 (104)
Rnds 16-18: 104 sc (3 rounds)

Break yarn. Draw the central yarn tail to the right side.
Crochet the second part similarly to the 16th round inclusive.
Put two parts together: the first part is on the bottom and the second part is
on the top. The right side is facing the wrong part. Insert the cardboard
template between the parts.

Crochet through both loops around the edge- 104 sc.

Hide the yarn tail inside the saucer and cut the excess yarn.

HANDLE
YARN -Alize Cotton Gold No. 152 (melange). 2.25 mm crochet hook.
Rnd 1: 7 into MR
Rnds 2-31: 7 sc (30 rounds)

Cut yarn, leaving a long tail for sewing.

Prepare the wireframe in the length of the crocheted part -10 cm (4 inches).
Wrap around the entire wireframe with adhesive tape.

25
 Insert the wireframe into the part and close the hole using a tapestry
needle.
Bend the handle into a circle and sew the ends together. Do not cut the
excess yarn, leaving a long tail for sewing.

CANDLE No.3
(The upper part)

YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
Break yarn.

26
 CANDLE No.3
(The bottom part)
YARN -Alize Cotton Gold No. 62 (white). 2.25 mm crochet hook.

Rnd 1: 8 into MR
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, inc)*8 (24)
* Crochet the next round through back loops only.
Rnd 4: 24 sc
* Crochet the next rounds through both loops.
Rnds 5-34: 24 sc (30 rounds)

Trace around the part on the cardboard and cut it out. Insert the template
inside and stuff it with fiberfill.
Roll the part on the table so that the fiberfill is evenly distributed.
Attach the upper part to the bottom part and crochet 24 sc through both
loops.

Cut yarn, leaving a tail 1 meter (40 inches) long.

27
Make the wax edges as guided on pages 9-10 of the pattern.
Pin the chains and sew or glue them.

FLAME
Crochet the flame as guided on pages 10-12 of the pattern.

ASSEMBLY
1. Pin the handle to the candle hollder and sew it. Hide the yarn tail and cut
the excess yarn.

28
 2. Pin the candle holder in the center of the saucer and sew it. Hide the yarn
tail inside the saucer.

3. Insert the candle into the candle holder.

4. Insert the flame in the center of the candle.

The third candle holder is finished!

Congratulation! Your candle holders are finished !

Thank you for purchasing my pattern.

29