0% found this document useful (0 votes)
10 views1 page

Double Sided Tape - v001

Double-sided Tape is a 1.5 mm tape designed for waterproof sealing of the Tilesafe membrane at various junctions. It requires clean surfaces, application of Primer D, and has specific adhesion and temperature resistance properties. The product is locally manufactured in South Africa and has a maximum shelf life of 6 months.

Uploaded by

solowhite20
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
10 views1 page

Double Sided Tape - v001

Double-sided Tape is a 1.5 mm tape designed for waterproof sealing of the Tilesafe membrane at various junctions. It requires clean surfaces, application of Primer D, and has specific adhesion and temperature resistance properties. The product is locally manufactured in South Africa and has a maximum shelf life of 6 months.

Uploaded by

solowhite20
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Double-sided Tape

Mastic sealing tape

Double-sided Tape is a 1,5 mm tape suited for


side- and end-lap sealing of the Tilesafe membrane.
Proudly manufactured locally!

Uses Application
Double-sided Tape is used to form waterproof joints at wall-to- • Surfaces should be clean, dry and dust free.
wall, wall-to-floor junctions and beneath all adjacent and end butt • Prime with Primer D.
joints of the Tilesafe membrane. • Apply 150 mm wide Double-sided Tape to the floor along the
centre line where each side and end lap butt joints will occur.
• Remove the underside release paper and fix tape to the floor.
Technical data • Leave the top plastic release film in place until the Tilesafe
Properties Test Method Metric membrane is applied.
Adhesion – to primed steel ASTM D1000 24hrs 2,5 N/mm • The Tilesafe membrane must centrally overlap the
Adhesion – to self ASTM D1000 24hrs 2,5 N/mm Double-sided Tape by 75 mm on each side.
Resistance to Acids, Alkalis & Salts Excellent
Note: If silicone sealant is to be used between tiles at corners, etc
Temperature range – application 10°C to 35°C
it is important to ensure that it does not make direct contact with
Temperature range – service 5°C to 70°C the Double-sided Tape.
Roll length 7,5 m
Roll width 150 mm Safety
Thickness – adhesive 1500 µm
• Normal hygiene procedures
• Wash hands thoroughly with soap and water or a proprietary
Thickness – total 1500 µm
hand-cleaner prior to eating or smoking
Weight 1,5 kg/m²
• Launder contaminated clothing, gloves, etc
Recommended Primer Primer D
Storage
Specifications are subject to change without notification. Results shown are typical but • Store in original containers in a cool, dry place.
reflect test procedures used. Actual field performance will depend on installation methods
and site conditions. • Maximum shelf life – 6 months.

Version 001-201203

Disclaimer: The use of this product is beyond the manufacturer’s control and liability is restricted to the replacement
Manufactured in SA of material proven faulty. The manufacturer is not responsible for any loss or damage arising from incorrect usage.
for SA conditions Specifications are subject to change without prior notice.

Available from Waterproofing Centres countrywide www.waterproofingcentre.co.za


www.waterproofingcentre.co.za

Cape Town Gauteng KwaZulu-Natal Port Elizabeth East London


Tel 021 448 7880 Tel 011 608 0317 Tel 031 569 3963 Tel 041 365 2936 Tel 043 722 5676
Fax 021 448 7897 Fax 011 608 0347 Fax 031 569 1849 Fax 041 365 6475 Fax 043 722 5676

Brackenfell George Margate Nelspruit email


Tel 021 981 8343 Tel 044 874 3905 Tel 039 312 2764 Tel 013 752 4409 assist@
Fax 044 874 3907 Fax 039 312 2673 Fax 013 752 6556 waterproofingcentre.co.za

You might also like