Date: ___________
Inspected By: ___________
Not
# Part Inspection Criteria OK Remarks
OK
No cracks or bends; latch
1 Top Hook [] []
present & working
No stretching; latch functional
2 Bottom Hook [] []
and secure
No rust, twist, crack, or
3 Load Chain [] []
elongation; properly lubricated
Moves freely; no damage or
4 Hand Chain [] []
knots
Chain Block No cracks or dents; casing tight
5 [] []
Body/Housing and intact
6 Brake System Engages properly; no slippage [] []
Gears/Internal Smooth operation; no unusual
7 [] []
Mechanism noise
Capacity and ID visible and
8 Identification Tags [] []
readable
9 General Condition Clean, dry, no oil/grease; properly stored [ ] [ ]
# Part Inspection Criteria OK Not OK Remarks
1 Power Cable No cuts, cracks, exposed wires, or burns [] []
2 Plug (Male End) Prongs straight, clean, and securely attached [] []
3 Socket Outlets (Female) No burn marks, cracks; sockets grip plugs firmly [] []
4 Reel Body No cracks, dents, or damage; frame is stable [] []
5 Cable Reel Mechanism Reel winds/unwinds smoothly; no jamming or friction [] []
6 Thermal Cut-Off (if any) Present and functioning (test if possible) [] []
7 GFCI/Surge Protection Test and reset button’s function (if equipped) [] []
8 Labels/Markings Load capacity, voltage, and warnings visible and readable [ ] []
9 General Cleanliness Dry, clean, free of oil or water; properly stored [] []
Date: ___________
Inspected By: ___________
Not
# Part Inspection Criteria OK Remarks
OK
1 Bow (Body) No cracks, distortion, wear, or corrosion [] []
2 Pin Straight, undamaged; fits snugly [] []
Threads (Screw
3 Clean, undamaged, and threads smoothly [] []
Pin)
4 Hole (for pin) Round, not worn or elongated [] []
Load rating, size, and manufacturer marking clearly
5 Markings [] []
visible
Locking Properly secures the pin; no missing parts (if safety
6 [] []
Mechanism pin/cotter used)
Overall
7 Assembles and disassembles smoothly [] []
Fit/Function
8 General Condition Clean, rust-free, no unauthorized modifications [] []
Date: ___________
Inspected By: ___________
Not
# Part Inspection Criteria OK Remarks
OK
No cuts, fraying, burns, holes, or broken
1 Webbing Surface [] []
stitches
2 Stitching Tight and complete; no loose or broken threads [ ] [ ]
3 Eyes (Loop Ends) No wear, distortion, or damage [] []
Eye Reinforcement
4 Pads (if present) are intact and undamaged [] []
Pads
Legible load rating, size, material, and
5 Label/Tag [] []
manufacturer info
No signs of chemical damage, UV fading, or
6 Discoloration/Burns [] []
heat exposure
7 Knots or Twists Sling is free of knots and twists [] []
8 General Cleanliness Clean and dry; no oil, grease, or contamination [] []
Date: ___________
Inspected By: ___________
Date: ___________
Inspected By: ___________
Not
# Part Inspection Criteria OK Remarks
OK
1 Light Housing/Body No cracks, dents, or rust; securely mounted [] [ ]
2 Lens/Cover Clean, no cracks or cloudiness [] []
Illuminates properly; no flickering or
3 LED/Bulb [] []
dimming
4 Heat Sink Free from dust and debris; not bent or broken [ ] []
5 Wiring/Cables No cuts, burns, or loose connections [] []
6 Plug/Connector Firm connection; no signs of arcing or wear [ ] []
Bolts and fasteners secure; angle adjustment
7 Mounting Bracket [] []
functional
8 Switch/Control Unit Functions properly; no overheating or damage [ ] []
Grounding (if
9 Ground wire securely attached and intact [] []
applicable)
10 General Condition Clean, dry, and safely positioned [] []
# Part Inspection Criteria OK Not OK Remarks
No cuts, abrasions, or exposed wires;
1) Power Cable [] []
insulation intact
Prongs straight and clean; plug casing
2) Plug (Male End) [] []
undamaged
No cracks or damage; securely attached to
3) GFCI Housing [] []
cord
4) GFCI Test Button Triggers power shutoff when pressed [] []
5) GFCI Reset
Restores power after test/trip [] []
Button
Functions correctly (green = safe, red =
6) Indicator Light [] []
fault, if applicable)
7) Outlet Tight, no burn marks, and securely
[ ] []
Receptacles mounted
No loosening or separation at plug or
8) Strain Relief [] []
outlet ends
Rating and warning labels visible and
9) Labels/Markings [] []
legible
Clean, dry, properly stored, and free of oil
10) General Condition [] []
or debris
Date: ___________
Inspected By: ___________
Date: ___________
Inspected By: ___________
PART / COMPONENT ITEM TO CHECK STATUS (OK / NOT REMARKS
OK)
Top Plate (10mm & 12mm ASTM Check for cracks,
A36) corrosion, or deformation
Verify proper welding and
alignment
Confirm thickness and
dimensions as per plan
Check for straightness and
Main Vertical Beam (6”x3”x0.4”)
no visible damage
Inspect for rust or pitting
Check for proper
connections/welds
Horizontal Support Beam Ensure it is level and
(6”x3”x0.4”) undamaged
Check welds and bolted
joints
Confirm tight and secure
Diagonal Bracings (4”x2”x0.4”)
ends
Check for any bending or
cracks
Inspect welds for
continuity and penetration
Ensure stable placement
Base Frame (4”x2”x0.4”)
on floor
Check for bending or
misalignment
Verify anchorage or
bolting
Check straightness and
Trolley Beam & Track
cleanliness of track
Ensure trolley moves
smoothly
Inspect for wear on beam
flanges
Look for cracks, undercut,
Welded Joints (All)
porosity
Check full weld coverage
at joints
Confirm vertical alignment
Overall Structure
and squareness
Look for rust, paint
damage, or missing parts
Check for deformation
from overloading
