Edifice Consultants Pvt.

Ltd
ITC-GUNTUR, RESIDENTIAL, CLUB HOUSE AND TRANSIT BLOCKS
PRELIMINARY BOQ FOR DOORS
Date
No.

ITEM

LOCATION

DESCRIPTION OF ITEMS

UNIT

QTY
TOTAL

Thursday, December 26, 2013

RATE

PREAMBLE FOR DOORS

Cost of laminate/veneer mentioned is the maximum cost. It should be inclusive of all materials,
taxes, transportation to site, storage, loading-unloading and all taxes, Octroi, duties as applicable.
All internal wooden framework to be treated with 1 coat of anti-termite coat/paint of approved make
as per manufacturer's specifications
Wherever mentioned, Cost of 1.5mm thick Laminate to be Rs. 400/Sqm inclusive of all taxes and
delivered at site. Cost of 1mm thick Laminate to be Rs. 340/Sqm inclusive of all taxes and
delivered at site
Wherever mentioned, Cost of veneer to be Rs. 900/Sqm inclusive of all taxes and delivered at site
The rate for doors to include shutter, finishes all hardware like exposed door closer, locks, hinges,
all as per drawings
All the hardware for the doors to be as per the manufacturers recommendation for the size and
application of the door. Patches and floor spring to be as per manufacturers specs. for the type,
size and location of door.
Note: In Case Of Double Leaf Door, Locks To Be Provided On One Shutter And Flush Mounted
Tower Bolts To Be Provided Within The Thickness Of Other Shutter. In Cases Of Bolting And
Locking Into Masonry / Frame, Strike Plates To Be Provided To Match Door Handle
ALL DOOR HARDWARE TO BE DORMA / D-LINE / INGERSOL RAND MAKE

1.00 Door frames in soft

wood and
hardwood

Providing and fixing in position door frames of size as per drawings made from soft wood of
thickness as per drawing and cladded with hardwood of thickness as per drawing with seasoned
teak wood Architraves all round the frame on both sides as per drawings and lipping patti as
indicated in the drawing on all round the shutters inclusive of making rebates for shutters /grills,
shaping, jointing, sand papering, applying a coat of bituminous paint on concealed surface,
necessary fixing in masonry / RCC by means of HILTI/Equivalent make Anchor fastener, 3 Nos. on
each side . Frames to finished with three coats of approved melamine polish finishing etc. all
material and labour complete.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Rmt

6,062.00

860.00

2.00 Door frames in

teak wood

Providing and fixing in position door frames of size as per drawings made from seasoned teak
wood of thickness as per drawing and cladded with seasoned teak wood Architraves all round the
frame on both sides as per drawings and lipping patti as indicated in the drawing on all round the
shutters inclusive of making rebates for shutters /grills, shaping, jointing, sand papering, applying a
coat of bituminous paint on concealed surface, necessary fixing in masonry / RCC by means of
HILTI/Equivalent make Anchor fastener, 3 Nos. on each side . Frames to finished with three coats
of approved melamine polish finishing etc. all material and labour complete.

Rmt

QRO

3.00 D1 - 1200mm X Flat entrance

2550 mm

Providing and constructing Single leaf door shutter of overall size 1200 x 2550mm with fixed
panel of 400mm on top inclusive of the following specifications

Nos

108.00

28,600.00

Nos

178.00

22,850.00

Nos

568.00

20,850.00

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

Providing and constructing Single leaf door of overall size 900 x 2550mm with fixed panel of
400mm on top inclusive of the following specifications

Nos

106.00

Providing and fixing in position 38mm thick solid Teakwood shutter with fixed panel of
400mm on top as shown in the drawings. All external surfaces and edges of the door to be
finished in three coats of melamine polish as approved by the Architect.
Cost to inclusive of top fixed panel bottom frame work as indicated in the drawings and
finished same as door frame and shall not be paid in door frame.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

4.00 D2 - 900mm
2550 mm

X entrance

Providing and constructing Single leaf door of overall size 900 x 2550mm with fixed panel of
400mm on top inclusive of the following specifications
Providing and fixing in position 38mm thick solid Teakwood shutter with fixed panel of
400mm on top as shown in the drawings. All external surfaces and edges of the door to be
finished in three coats of melamine polish as approved by the Architect.
Cost to inclusive of top fixed panel bottom frame work as indicated in the drawings and
finished same as door frame and shall not be paid separately.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

5.00 D3 - 900mm X
2550 mm

bed room

Providing and constructing Single leaf door of overall size 900 x 2550mm with fixed panel of
400mm on top inclusive of the following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side. The cost to also include a fixed panel on top 400mm high as shown in the
drawings finished in 1.5mm thick laminate on both sides with lipping on edges all as indicated
above for the shutter.
Cost to inclusive of top fixed panel bottom frame work as indicated in the drawings and
finished same as door frame and shall not be paid separately.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

6.00 D3 - 900mm X
2550 mm
7.00 D3A - 900mm X
2550 mm

kitchen

20,850.00

7.00 D3A - 900mm X

2550 mm

kitchen

Nos

106.00

20,850.00

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side. The cost to also include a fixed panel on top 400mm high as shown in the
drawings finished in 1.5mm thick laminate on both sides with lipping on edges all as indicated
above for the shutter and Vision panel of size as shown in the drawings with 6mm thick clear glass
with approved beading finished in melamine polish to match the shade of the laminate.
Cost to inclusive of top fixed panel bottom frame work as indicated in the drawings and
finished same as door frame and shall not be paid separately.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled, door frame paid
separately. .
Please refer Hardware Scheduled for Hardware.
8.00 D3A - 900mm X
2550 mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

9.00 D4-750mm x
2150mm

Providing and constructing Single leaf door of overall size 750 x 2150mm inclusive of the
following specifications
Providing and fixing pre-polished 19mm thick twin pre-polished Granite frame, 100-125mm
wide each (as per the width of the wall) inclusive of all mitred joinery inclusive of all necessary
joinery in Araldite and cement paste etc. All exposed surfaces and edges to be chamfered by 6mm
and mirror polished with 6mm wide groove to be made in wall at the junction of stone and finished
surface of wall Complete as directed.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Nos

564.00

24,000.00

Nos

54.00

24,000.00

Nos

36.00

21,050.00

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
10.00 D4a-750mm x
2150mm

Providing and constructing Single leaf door of overall size 750 x 2100mm inclusive of the
following specifications
Providing and fixing pre-polished 19mm thick twin pre-polished Granite frame, 100-125mm
wide each (as per the width of the wall) inclusive of all mitred joinery inclusive of all necessary
joinery in Araldite and cement paste etc. All exposed surfaces and edges to be chamfered by 6mm
and mirror polished with 6mm wide groove to be made in wall at the junction of stone and finished
surface of wall Complete as directed.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
11.00 D5 - 900mm X
2150 mm

Providing and constructing Single leaf door of overall size 900 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled, door frame paid
separately. .
Please refer Hardware Scheduled for Hardware.
12.00 D5 - 900mm X
2150 mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

13.00

Supply and installation of Single shutter Grill door D6-900mm X 2550mm as per detail drawing.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A.

Nos

108.00

17,500.00

Nos

12.00

26,000.00

Nos

4.00

55,000.00

Nos

8.00

23,800.00

D6 - 900mm X
2550 mm

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
14.00 D7 - 1200mm X
2400 mm

Providing and fixing Single shutter Metal Door D7-1200mm X2400mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
15.00

D7a-1500mm
X2400mm

Providing and fixing Double shutter Metal Door D7a-1500mm X2400mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
16.00 D8 - 1200mm X
2150 mm

Providing and constructing Single leaf door of overall size 1200 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

16.00 D8 - 1200mm X
2150 mm

Nos

8.00

23,800.00

The rate to include providing and fixing the hardware as per hardware Scheduled, door frame paid
separately.
Please refer Hardware Scheduled for Hardware.
17.00 D8 - 1200mm X
2150 mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

18.00

Providing and fixing Single shutter Metal Door D8a-1200mm X2150mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Nos

3.00

23,500.00

Nos

9.00

23,500.00

Nos

253.00

11,000.00

Nos

38.00

8,500.00

Nos

58.00

40,000.00

Nos

64.00

30,000.00

D8a-1200mm X
2150mm

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
19.00 D9-1200mm X
2150mm

Providing and fixing Single shutter Metal Door D9-1200mm X2150mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
20.00 D10 - 600mmX
2000 mm

Providing and fixing Single shutter Metal Door D10-600mm X2000mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

21.00 D11 - 450mm X

2000 mm

Providing and fixing Single shutter Metal Door D11-450mm X2000mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
22.00 FD1 - 900mm x
2000mm

Providing and fixing of Double shutter metal fire door FD1-900mm X 2000mm at all levels
approved Manufacturer. Fully flush type of 46 mm thick Pressed Galvanized steel conforming to IS
277, Double leaf of 2 hour Fire rating (FD 2HR) confirming to IS 3614 which consists of frame,
shutter, infill and finish as detailed below:
Door frame shall be double rebate profile of size as per drawing with bending radius of 1.4 mm
having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully
flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge).
The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded
honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with
primer coating, stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane
aliphatic grade paint (35 micron DFT) of approved colour. Rate to be inclusive of vision panel as
per detail drawing.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Rate shall include for supply and fix 3mm thick base plates, all joints of frames with provision for
anchor bolt fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish,
pre-punched cut outs to receive hardware and iron Mongery, 3mm thick hinge plates predrilled to
receive hinges for screw mounted fixing, Hardware as per hardware scheduled.

Rate shall also include for grouting the frame with cement slurry between Wall and Frame to the
required thickness as per manufacturers specifications.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
23.00 FD2 -900mm X
1400mm

As per vendor shop

drawings

Providing and fixing of Double shutter metal fire door -FD2-900mm X 1400mm at all levels
approved Manufacturer. Fully flush type of 46 mm thick Pressed Galvanized steel conforming to IS
277, Double leaf of 2 hour Fire rating (FD 2HR) confirming to IS 3614 which consists of frame,
shutter, infill and finish as detailed below:
Door frame shall be double rebate profile of size as per drawing with bending radius of 1.4 mm
having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully
flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge).
The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded
honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with
primer coating, stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane
aliphatic grade paint (35 micron DFT) of approved colour.
Please Refer Detail Drawing No. B-ITC-GTR-A/DD/5001-R1& 5002-A

Rate shall include for supply and fix 3mm thick base plates, all joints of frames with provision for
anchor bolt fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish,
pre-punched cut outs to receive hardware and iron Mongery, 3mm thick hinge plates predrilled to
receive hinges for screw mounted fixing, Hardware as per hardware scheduled.

Rate shall also include for grouting the frame with cement slurry between Wall and Frame to the
required thickness as per manufacturers specifications.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

24.00 Door frame in

hardwood

Transit block

25.00 Door frame in

hardwood without
architraves

Club House

CLUB HOUSE, TRANSIT BLOCK

Providing and fixing in position door frames of size as per drawings made from hardwood
frame with seasoned teak wood Architraves and lipping as indicated in the drawing on both sides of
the shutters inclusive of making rebates for shutters /grills, shaping, jointing, sand papering,
applying a coat of bituminous paint on concealed surface, necessary fixing in masonry / RCC by
means of HILTI/Equivalent make Anchor fastener, 3 Nos. on each side . Frames to finished with
three coats of approved melamine polish finishing etc. all material and labour complete.

Rmt

347.00

890.00

Do as above item but without architraves

Rmt

410.00

600.00

26.00 Door frames in

teak wood

Providing and fixing in position door frames of size as per drawings made from seasoned teak
wood of thickness as per drawing and cladded with seasoned teak wood Architraves and lipping as
indicated in the drawing on both sides of the shutters inclusive of making rebates for shutters /grills,
shaping, jointing, sand papering, applying a coat of bituminous paint on concealed surface,
necessary fixing in masonry / RCC by means of HILTI/Equivalent make Anchor fastener, 3 Nos. on
each side . Frames to finished with three coats of approved melamine polish finishing etc. all
material and labour complete.

Rmt

QRO

27.00 Door frame in

hardwood without
architraves

Do as above item but without architraves

Rmt

QRO

28.00 D1-1500mm
X2450mm

Providing and constructing Double leaf door of overall size 1500 x 2450mm inclusive of the
following specifications
Providing and fixing hollow core flush door shutter, 50mm thick thermo pressed with 12mm
thick seasoned teak wood external lipping as per IS:2202 and finished in approved melamine
polish. The external surfaces of the shutter to be finished in 1.5mm thick laminate on both
side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

7.00

59,300.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
29.00 D1-1500mm
X2450mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

30.00 D2-1500mm
X2450mm

Providing and constructing Double leaf door of overall size 1500 x 2450mm inclusive of the
following specifications.

Nos

3.00

44,200.00

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side. Rate to include
1. Vision panel of size 250 x 700mm made from 8mm thick clear glass with seasoned teakwood
beading finished in melamine polish to match the shade of the laminate
2. Kick plate with smoothened edges and rounded corners flush face fixing screws, height 300mm
in SS 304 grade satin stainless steel of thickness as per drawing.
3. Push plate with smoothened edges and rounded corners flush face fixing screws, height 150mm
in SS 304 grade satin stainless steel of thickness as per drawing.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

31.00 D2-1500mm
X2450mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

31.00 D3-1000mm
X2150mm

Providing and constructing Single leaf door of overall size 1000 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

40.00

23,300.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
32.00 D3-1000mm
X2150mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

33.00 D4-1200 x
2450mm

Providing and constructing Single leaf door of overall size 1200 x 2450mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

18.00

Nos

QRO

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
34.00 D4-1200 x
2450mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

24,400.00

35.00 D4a-1500 x
2450mm

Providing and fixing Double shutter Metal Door D4a-1500mm X2450mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing - 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,

Nos

1.00

49,612.50

Nos

2.00

28,400.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
36.00 D5-1200 x
2450mm

Providing and constructing Single leaf door of overall size 1200 x 2450mm inclusive of the
following specifications
Providing and fixing Solid core shutter door, 38mm thick thermo pressed with 12mm thick
seasoned teak wood external lipping as per IS:2202 and finished in approved melamine polish.
The external surfaces of the shutter to be finished in 1.5mm thick laminate on both side.
The rate to include providing and fixing the following
1. Vision panel of size 250 x 700mm made from 8mm thick clear glass with seasoned teakwood
beading finished in melamine polish to match the shade of the laminate
2. Kick plate with smoothened edges and rounded corners flush face fixing screws, height 300mm
in SS 304 grade in satin stainless steel of thickness as per drawing.
3. Push plate with smoothened edges and rounded corners flush face fixing screws, 150mm high in
SS 304 grade in satin stainless steel of thickness as per drawing.

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
37.00 D5-1200 x
2450mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

38.00 D6-1000mm
X2150mm

Providing and constructing Single leaf door of overall size 1000 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

17.00

24,300.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
39.00 D6-1000mm
X2150mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

40.00 D7-900 x 2150mm

Providing and constructing Single leaf door of overall size 900 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
The rate to include providing and fixing the following
1. Vision panel of size 250 x 700mm made from 8mm thick clear glass with seasoned teakwood
beading finished in melamine polish to match the shade of the laminate
2. Kick plate with smoothened edges and rounded corners flush face fixing screws, height 300mm
in SS 304 grade in satin stainless steel of thickness as per drawing.
3. Push plate with smoothened edges and rounded corners flush face fixing screws, 150mm high in
SS 304 grade in satin stainless steel of thickness as per drawing.

Nos

17.00

20,400.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
41.00 D7-900 x 2150mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

42.00 D7a-900mm
X2150mm

Providing and constructing Single leaf door of overall size 900 x 2150mm inclusive of the
following specifications
Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

4.00

25,900.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
43.00 D7a-900mm
X2150mm

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

44.00 D9-750mm
X2150mm

Providing and constructing Single leaf door of overall size 750 x 2150mm inclusive of the
following specifications
Providing and fixing pre-polished 19mm thick twin pre-polished Granite frame, 100-125mm
wide each (as per the width of the wall) inclusive of all mitred joinery inclusive of all necessary
joinery in Araldite and cement paste etc. All exposed surfaces and edges to be chamfered by 6mm
and mirror polished with 6mm wide groove to be made in wall at the junction of stone and finished
surface of wall Complete as directed.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

57.00

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

16,000.00

45.00 D10-1200mm
X2150mm

Providing and fixing Single shutter Metal Door D10-1200mm X2150mm with in pressed
galvanized steel , which consists of frame, shutter, in fill and finish as detailed below and
conforming to IS 277. Door frame shall be double rebate profile of size as per drawing- 1.25 mm
thick galvanized steel sheet (18 gauge) with steel door shutter of 46 mm thick fully flush, double
skin door shall manufactured from 0.80 mm thick galvanized steel sheet. The infill material shall be
resin bonded honey comb craft paper with thermal insulation. Door frames and shutter shall be
finished with etch primer coating, stoved zinc phosphate primer and thermo setting synthetic
enamel paint of approved colour. Rate shall include for supply and fix anchor fastener for fixing of
door frames into wall / RC surface, stainless steel ball bearing hinges - 3 mm thick and of size 102
x 89 mm,.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5005/R0

Nos

1.00

28,380.00

Nos

43.00

9,800.00

Do as above item but instead of laminate, the external surfaces of the shutter to be finished in
4mm thick veneer on both side. All veneer surfaces to be melamine polished

Nos

QRO

Providing and constructing Single leaf door of overall size 1000 x 2150mm inclusive of the
following specifications
Providing and fixing pre-polished 19mm thick twin pre-polished Granite frame, 100-125mm
wide each (as per the width of the wall) inclusive of all mitred joinery inclusive of all necessary
joinery in Araldite and cement paste etc. All exposed surfaces and edges to be chamfered by 6mm
and mirror polished with 6mm wide groove to be made in wall at the junction of stone and finished
surface of wall Complete as directed.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

Nos

2.00

12,000.00

Nos

12.00

42,000.00

Nos

19.00

30,000.00

Nos

7.00

30,000.00

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
46.00

D13-900mm x
1400mm

Providing and constructing Single leaf door of overall size 900 x 1400mm inclusive of the
following specifications
Providing and fixing 25mm thick block board shutter door with 12mm thick seasoned teak
wood external lipping as per IS:2202 and finished in approved melamine polish. The external
surfaces of the shutter to be finished in 1.5mm thick laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
47.00

48.00

D13-900mm x
1400mm
D15-1000mm
2150mm

Providing and fixing hollow core marine grade flush door shutter, 38mm thick thermo
pressed with 12mm thick seasoned teak wood external lipping as per IS:2202 and finished in
approved melamine polish. The external surfaces of the shutter to be finished in 1.5mm thick
laminate on both side.
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5003/R0

The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
49.00 FD1 - 1200mm
X2150mm

Providing and fixing of Single Shutter Hollow metal fire door at all levels approved
Manufacturer. Fully flush type of 48 mm thick Pressed Galvanized steel conforming to IS 277,
Single of 2 hour Fire rating (FD 2HR) confirming to IS 3614 which consists of frame, shutter, infill
and finish as detailed below:
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5005/R0
SIZE 1200 X 2150MM

Door frame shall be double rebate profile of size as per drawing with bending radius of 1.4 mm
having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully
flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge).
The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded
honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with
primer coating, stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane
aliphatic grade paint (35 micron DFT) of approved colour. Rate to be inclusive of vision panel as
per detail drawing.

Rate shall include for supply and fix 3mm thick base plates, all joints of frames with provision for
anchor bolt fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish,
pre-punched cut outs to receive hardware and iron Mongery, 3mm thick hinge plates predrilled to
receive hinges for screw mounted fixing, Hardware to be as under

Rate shall also include for grouting the frame with cement slurry between Wall and Frame to the
required thickness as per manufacturers specifications.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
50.00 FD2 -900mm
X1400mm

Providing and fixing of Double shutter Hollow metal fire door at all levels approved
Manufacturer. Fully flush type of 48 mm thick Pressed Galvanized steel conforming to IS 277,
Double leaf of 2 hour Fire rating (FD 2HR) confirming to IS 3614 which consists of frame, shutter,
infill and finish as detailed below:
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5005/R0
SIZE 900 X 1400MM
Door frame shall be double rebate profile of size as per drawing with bending radius of 1.4 mm
having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully
flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge).
The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded
honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with
primer coating, stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane
aliphatic grade paint (35 micron DFT) of approved colour.

Rate shall include for supply and fix 3mm thick base plates, all joints of frames with provision for
anchor bolt fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish,
pre-punched cut outs to receive hardware and iron Mongery, 3mm thick hinge plates predrilled to
receive hinges for screw mounted fixing, Hardware to be as under

Rate shall also include for grouting the frame with cement slurry between Wall and Frame to the
required thickness as per manufacturers specifications.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.
51.00 FD3-900mm X
1400mm

Providing and fixing of Double shutter Hollow metal fire door at all levels approved
Manufacturer. Fully flush type of 48 mm thick Pressed Galvanized steel conforming to IS 277,
Double leaf of 2 hour Fire rating (FD 2HR) confirming to IS 3614 which consists of frame, shutter,
infill and finish as detailed below:
Please Refer Detail Drawing No. B-ITC-GTR-CH/DD/5005/R0
SIZE 900 X 1400MM

51.00 FD3-900mm X
1400mm

Nos

Door frame shall be double rebate profile of size as per drawing with bending radius of 1.4 mm
having 1.60mm thick galvanized steel sheet (16 gauge). Steel door shutter of 46 mm thick fully
flush, double skin door shall manufactured from 1.20 mm thick galvanized steel sheet (18 gauge).
The stile edges to be lock seamed with no weld marks. The infill material shall be resin bonded
honey comb Kraft paper with thermal insulation. Door frames and shutter shall be finished with
primer coating, stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane
aliphatic grade paint (35 micron DFT) of approved colour. Rate to be inclusive of vision panel as
per detail drawing.

Rate shall include for supply and fix 3mm thick base plates, all joints of frames with provision for
anchor bolt fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish,
pre-punched cut outs to receive hardware and iron Mongery, 3mm thick hinge plates predrilled to
receive hinges for screw mounted fixing, Hardware to be as under

Rate shall also include for grouting the frame with cement slurry between Wall and Frame to the
required thickness as per manufacturers specifications.
The rate to include providing and fixing the hardware as per hardware Scheduled.
Please refer Hardware Scheduled for Hardware.

TOTAL FOR ALL DOORS

7.00

30,000.00

Thursday, December 26, 2013

AMOUNT (Rs.)

5,213,320.00

3,088,800.00

4,067,300.00

11,842,800.00

2,210,100.00

2,210,100.00

13,536,000.00

1,296,000.00

757,800.00

1,890,000.00

312,000.00

220,000.00

190,400.00

190,400.00

70,500.00

211,500.00

2,783,000.00

323,000.00

2,320,000.00

1,920,000.00

308,830.00

246,000.00

415,100.00

132,600.00

932,000.00

439,200.00

49,612.50

56,800.00

413,100.00

346,800.00

103,600.00

912,000.00

28,380.00

421,400.00

24,000.00

504,000.00

570,000.00

210,000.00

210,000.00

58,365,942.50

Edifice Consultants Pvt. Ltd

Rev.00
/ Dt. 20.04.2012
MEASUREMENT
No
Head

Item

1.00
1.00
1.00
1.00
1.00

Door
Door
Door
Door
Door

FD1
FD1
FD1
FD1
FD1

2.00
2.00
2.00
2.00
2.00
2.00

Door
Door
Door
Door
Door
Door

FD2
FD2
FD2
FD2
FD2
FD2

3.00
3.00
3.00

Door
Door
Door

D1
D1
D1

4.00
4.00
4.00

Door
Door
Door

D2
D2
D2

5.00
5.00
5.00
5.00
5.00
5.00
5.00

Door
Door
Door
Door
Door
Door
Door

D3
D3
D3
D3
D3
D3
D3

6.00
6.00
6.00

Door
Door
Door

D3a
D3a
D3a

7.00
7.00
7.00
7.00
7.00
7.00

Door
Door
Door
Door
Door
Door

D4
D4
D4
D4
D4
D4

8.00
8.00
8.00

Door
Door
Door

D4a
D4a
D4a

9.00
9.00
9.00

Door
Door
Door

D5
D5
D5

10.00
10.00
10.00

Door
Door
Door

D5a
D5a
D5a

11.00
11.00
10.00
10.00
11.00

Door
Door
Door
Door
Door

D6
D6
D5a
D5a
D6

12.00
15.00
12.00
12.00

Door
Door
Door
Door

D7
D8a
D7
D7

13.00
13.00
13.00

Door
Door
Door

D7a
D7a
D7a

14.00
14.00
14.00
14.00
14.00
14.00
14.00

Door
Door
Door
Door
Door
Door
Door

D8
D8
D8
D8
D8
D8
D8

15.00
15.00
15.00

Door
Door
Door

D8a
D8a
D8a

16.00
16.00
16.00

Door
Door
Door

D9
D9
D9

17.00
17.00
17.00
17.00

Door
Door
Door
Door

D10
D10
D10
D10

BLOCK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK

Location

Shaft-Ele
Shaft-Ele

Unit

Flr

Nos
Nos
Nos
Nos
Nos

Stilt
1F-9F

Nos
Nos
Nos
Nos
Nos
Nos

Stilt
1F-9F
TF

Total for D1 for 3 BHK

Nos
Nos
Nos

Entry from dining

Entry from utility
Total for D2 for 3 BHK

No of floor

No

L/A

1.00
9.00

4.00
4.00

1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00

1.00
9.00
1.00

4.00
4.00
4.00

1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00

1F-9F
1F-9F
T

9.00

8.00

1.00
1.00

1.00
1.00

1.00
1.00

Nos
Nos
Nos

1F-9F
1F-9F
T

9.00
9.00

8.00
8.00

1.00
1.00

1.00
1.00

1.00
1.00

Toilet
Master Bed
Children Bed
Guest Bed
Kitchen
Servant Room
Total for D3 for 3 BHK

Nos
Nos
Nos
Nos
Nos
Nos
Nos

Stilt
1F-9F
1F-9F
1F-9F
1F-9F
1F-9F
T

1.00
9.00
9.00
9.00
9.00
9.00

4.00
8.00
8.00
8.00
8.00
8.00

1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00

Kitchen

1F-9F
1F-9F
T

9.00

8.00

1.00
1.00

1.00
1.00

1.00
1.00

Total for D3a for 3 BHK

Nos
Nos
Nos

Powder Room
Servant Toilet
Master Bed Toilet
Guset Bed Toilet
Children Bed Toilet
Total for D4 for 3 BHK

Nos
Nos
Nos
Nos
Nos
Nos

1F-9F
1F-9F
1F-9F
1F-9F
1F-9F
T

9.00
9.00
9.00
9.00
9.00

8.00
8.00
8.00
8.00
8.00

1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00

Garbage Room

Nos
Nos
Nos

1F-9F
1F-9F
T

9.00
0.00

4.00
0.00

1.00
1.00

1.00
1.00

1.00
1.00

Total for D4a for 3 BHK

Shaft Service
Shaft Service
Total for D5 for 3 BHK

Nos
Nos
Nos

1F-9F
1F-9F
T

9.00
0.00

4.00
0.00

1.00
1.00

1.00
1.00

1.00
1.00

Shaft Service
Shaft Service
Total for D5a for 3 BHK

Nos
Nos
Nos

1F-9F
1F-9F
T

9.00
0.00

4.00
0.00

1.00
1.00

Flat Entry

1F-9F
1F-9F
1F-9F
1F-9F
T

9.00

8.00

Shaft Service
Shaft Service
Total for D6 for 3 BHK

Nos
Nos
Nos
Nos
Nos

9.00
0.00

4.00
0.00

1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00

Garbage Room
Communication Room
Area Reserve-Future Use
Total for D7 for 3 BHK

Nos
Nos
Nos
Nos

Stilt
Stilt
Stilt
T

1.00
1.00
1.00

4.00
2.00
2.00

1.00
1.00
1.00

1.00
1.00
1.00

1.00
1.00
1.00

Panel Room

Stilt
Stilt
T

1.00

3.00

1.00
1.00

1.00
1.00

1.00
1.00

Total for D7a for 3 BHK

Nos
Nos
Nos

Area Reserve-Future Use

Estate Manager
Loundromat
Doctor cabin
Doctor cunsultant
Store
Total for D8 for 3 BHK

Nos
Nos
Nos
Nos
Nos
Nos
Nos

Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
T

1.00
1.00
1.00
1.00
1.00
1.00

3.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00

Communication Room

Stilt
Stilt
T

1.00

2.00

1.00
1.00

1.00
1.00

1.00
1.00

Total for D8a for 3 BHK

Nos
Nos
Nos

Staircase
LMR
Total for D9 for 3 BHK

Nos
Nos
Nos

TF
TF
T

1.00
1.00

4.00
2.00

1.00
1.00

1.00
1.00

1.00
1.00

Shaft Service
Shaft Service
Shaft Service
Total for D10 for 3 BHK

Nos
Nos
Nos
Nos

Stilt
1F-9F
1F-9F
T

1.00
9.00
0.00

34.00
16.00
0.00

1.00
1.00
1.00

1.00
1.00
1.00

1.00
1.00
1.00

Total for FD1 for 3 BHK

Shaft-FS
Shaft-FS
Shaft-FS

Total for FD2 for 3 BHK

Flat Entry

1.00
1.00

18.00
18.00
18.00

Door
Door
Door

D11
D11
D11

19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00
19.00

Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame
Door frame

D1
D2
D2
D3
D3
D3
D3
D3
D3
D3a
D5
D8
D8
D8
D8
D8
D8

3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK
3BHK

Shaft Service
Shaft Service
Total for D11 for 3 BHK

Nos
Nos
Nos

Stilt
Stilt
T

1.00
0.00

16.00
0.00

1.00
1.00

1.00
1.00

1.00
1.00

Flat Entry
Entry from dining
Entry from utility
Toilet
Master Bed
Children Bed
Guest Bed
Kitchen
Servant Room
Kitchen
Shaft Service
Area Reserve-Future Use
Estate Manager
Loundromat
Doctor cabin
Doctor cunsultant
Store

Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt

1F-9F
1F-9F
1F-9F
Stilt
1F-9F
1F-9F
1F-9F
1F-9F
1F-9F
1F-9F
1F-9F
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
Stilt
T

9.00
9.00
9.00
1.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
1.00
1.00
1.00
1.00
1.00
1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

8.00
8.00
8.00
4.00
8.00
8.00
8.00
8.00
8.00
8.00
4.00
3.00
1.00
1.00
1.00
1.00
1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

6.30
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
5.20
5.50
5.50
5.50
5.50
5.50
5.50
1.00
1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00

1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00

Total for 0 for 3 BHK

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Secure Rock False Ceiling

3BHK

Total for Secure

Ceiling for 3 BHK

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Toilets

5.38

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Sqm

1.00

1.00

1.00

1.00

False Ceiling

Metal Modular GI Ceiling

3BHK

Total for Metal Modular GI Ceiling Sqm

for 3 BHK

Rock

False Sqm

Sqm

Stilt

1.00

1.00

Qty

Buffer

Total

4.00
36.00
0.00
0.00
40.00

0.00%

40.00

4.00
36.00
4.00
0.00
0.00
44.00

0.00%

44.00

72.00
0.00
72.00

0.00%

72.00

72.00
72.00
144.00

0.00%

144.00

4.00
72.00
72.00
72.00
72.00
72.00
364.00

0.00%

364.00

72.00

0.00%

72.00

72.00
72.00
72.00
72.00
72.00
360.00

0.00%

360.00

36.00
0.00
36.00

0.00%

36.00

36.00
0.00
36.00

0.00%

36.00

0.00
0.00
0.00

0.00%

0.00

72.00
0.00
36.00
0.00
108.00

0.00%

108.00

4.00
2.00
2.00
8.00

0.00%

8.00

3.00
0.00
3.00

0.00%

3.00

3.00
1.00
1.00
1.00
1.00
1.00
8.00

0.00%

8.00

2.00
0.00
2.00

0.00%

2.00

4.00
2.00
6.00

0.00%

6.00

34.00
144.00
0.00
178.00

0.00%

178.00

72.00

16.00
0.00
16.00

0.00%

16.00

453.60
432.00
432.00
24.00
432.00
432.00
432.00
432.00
432.00
432.00
187.20
16.50
5.50
5.50
5.50
5.50
5.50
0.00
0.00
0.00
0.00
0.00
0.00
0.00
4,164.80

0.00%

4,165.00

0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

5.00%

0.00

5.00%

6.00

5.38
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
5.38

TALIN MODULAR OFFICE FURNITURE SYSTEMS Pvt Ltd.,

Sy. No. 189 & 190, 15th Cross, 3rd Block, 1st Stage, H.B.R Layout,
Kalyannagar Post, Bangalore - 560043
Ph: 080- 25430712/25442367

D6
D6A
D7
fD

327

32
420
78
36
36

51
176

26
22
12

12
2
26

8
27

CONCEALED
HANDLE

DOOR CHAIN

27
26

27

140
26
22
12

27

78

202

DOOR BUSH

51
140

26

204

CYLINDRICAL
LOCK WITH
KEYS

CYLINDRICAL
LOCK
KEYLESS

21
32

140

27

688

23
44

PULL HANDLE

TOWER BOLT
8"

TOWER BOLT
4"

BIOMETRIC
LOCK WITH
HANDLE

HOOK BOLT

EPC
CYLINDER

MORTISE
LOCKCASE

5 INCHES
HINGES
204

MAGNETIC
DOOR STOPER

51
32
140
26
12
12
27
26
0
0
0
1

TOWER BOLT
12"

ME
D1
D2
D2A
D3
D3A
D4
D5

4 INCHES
HINGES

Door
Type

Quantity

BOQ HARDWARE For Zone B

51

166

34

95

55

166

26

14

226

51

27

Remarks

Sliding Door