Chapter 9 – Software Evolution

30/10/2014 Chapter 9 Software Evolution 1

Topics covered

 Evolution processes
 Legacy systems
 Software maintenance

30/10/2014 Chapter 9 Software Evolution 2

Software change

 Software change is inevitable

 New requirements emerge when the software is used;
 The business environment changes;
 Errors must be repaired;
 New computers and equipment is added to the system;
 The performance or reliability of the system may have to be
improved.
 A key problem for all organizations is implementing and
managing change to their existing software systems.

30/10/2014 Chapter 9 Software Evolution 3

Importance of evolution

 Organisations have huge investments in their software

systems - they are critical business assets.
 To maintain the value of these assets to the business,
they must be changed and updated.
 The majority of the software budget in large companies
is devoted to changing and evolving existing software
rather than developing new software.

30/10/2014 Chapter 9 Software Evolution 4

A spiral model of development and evolution

30/10/2014 Chapter 9 Software Evolution 5

Evolution and servicing

30/10/2014 Chapter 9 Software Evolution 6

Evolution and servicing

 Evolution
 The stage in a software system’s life cycle where it is in
operational use and is evolving as new requirements are
proposed and implemented in the system.
 Servicing
 At this stage, the software remains useful but the only changes
made are those required to keep it operational i.e. bug fixes and
changes to reflect changes in the software’s environment. No
new functionality is added.
 Phase-out
 The software may still be used but no further changes are made
to it.

30/10/2014 Chapter 9 Software Evolution 7

 Evolution processes

30/10/2014 Chapter 9 Software Evolution 8

Evolution processes

 Software evolution processes depend on

 The type of software being maintained;
 The development processes used;
 The skills and experience of the people involved.
 Proposals for change are the driver for system evolution.
 Should be linked with components that are affected by the
change, thus allowing the cost and impact of the change to be
estimated.
 Change identification and evolution continues throughout
the system lifetime.

30/10/2014 Chapter 9 Software Evolution 9

Change identification and evolution processes

30/10/2014 Chapter 9 Software Evolution 10

The software evolution process

30/10/2014 Chapter 9 Software Evolution 11

Change implementation

30/10/2014 Chapter 9 Software Evolution 12

Change implementation

 Iteration of the development process where the revisions

to the system are designed, implemented and tested.
 A critical difference is that the first stage of change
implementation may involve program understanding,
especially if the original system developers are not
responsible for the change implementation.
 During the program understanding phase, you have to
understand how the program is structured, how it
delivers functionality and how the proposed change
might affect the program.

30/10/2014 Chapter 9 Software Evolution 13

Urgent change requests

 Urgent changes may have to be implemented without

going through all stages of the software engineering
process
 If a serious system fault has to be repaired to allow normal
operation to continue;
 If changes to the system’s environment (e.g. an OS upgrade)
have unexpected effects;
 If there are business changes that require a very rapid response
(e.g. the release of a competing product).

30/10/2014 Chapter 9 Software Evolution 14

The emergency repair process

30/10/2014 Chapter 9 Software Evolution 15

Agile methods and evolution

 Agile methods are based on incremental development so

the transition from development to evolution is a
seamless one.
 Evolution is simply a continuation of the development process
based on frequent system releases.
 Automated regression testing is particularly valuable
when changes are made to a system.
 Changes may be expressed as additional user stories.

30/10/2014 Chapter 9 Software Evolution 16

Handover problems

 Where the development team have used an agile

approach but the evolution team is unfamiliar with agile
methods and prefer a plan-based approach.
 The evolution team may expect detailed documentation to
support evolution and this is not produced in agile processes.
 Where a plan-based approach has been used for
development but the evolution team prefer to use agile
methods.
 The evolution team may have to start from scratch developing
automated tests and the code in the system may not have been
refactored and simplified as is expected in agile development.

30/10/2014 Chapter 9 Software Evolution 17

 Legacy systems

30/10/2014 Chapter 9 Software Evolution 18

Legacy systems

 Legacy systems are older systems that rely on

languages and technology that are no longer used for
new systems development.
 Legacy software may be dependent on older hardware,
such as mainframe computers and may have associated
legacy processes and procedures.
 Legacy systems are not just software systems but are
broader socio-technical systems that include hardware,
software, libraries and other supporting software and
business processes.

30/10/2014 Chapter 9 Software Evolution 19

The elements of a legacy system

30/10/2014 Chapter 9 Software Evolution 20

Legacy system components

 System hardware Legacy systems may have been

written for hardware that is no longer available.
 Support software The legacy system may rely on a
range of support software, which may be obsolete or
unsupported.
 Application software The application system that
provides the business services is usually made up of a
number of application programs.
 Application data These are data that are processed by
the application system. They may be inconsistent,
duplicated or held in different databases.
30/10/2014 Chapter 9 Software Evolution 21
Legacy system components

 Business processes These are processes that are used

in the business to achieve some business objective.
 Business processes may be designed around a legacy
system and constrained by the functionality that it
provides.
 Business policies and rules These are definitions of how
the business should be carried out and constraints on
the business. Use of the legacy application system may
be embedded in these policies and rules.

30/10/2014 Chapter 9 Software Evolution 22

Legacy system layers

30/10/2014 Chapter 9 Software Evolution 23

Legacy system replacement

 Legacy system replacement is risky and expensive so

businesses continue to use these systems
 System replacement is risky for a number of reasons
 Lack of complete system specification
 Tight integration of system and business processes
 Undocumented business rules embedded in the legacy system
 New software development may be late and/or over budget

30/10/2014 Chapter 9 Software Evolution 24

Legacy system change

 Legacy systems are expensive to change for a number

of reasons:
 No consistent programming style
 Use of obsolete programming languages with few people
available with these language skills
 Inadequate system documentation
 System structure degradation
 Program optimizations may make them hard to understand
 Data errors, duplication and inconsistency

30/10/2014 Chapter 9 Software Evolution 25

Legacy system management

 Organisations that rely on legacy systems must choose

a strategy for evolving these systems
 Scrap the system completely and modify business processes so
that it is no longer required;
 Continue maintaining the system;
 Transform the system by re-engineering to improve its
maintainability;
 Replace the system with a new system.
 The strategy chosen should depend on the system
quality and its business value.

30/10/2014 Chapter 9 Software Evolution 26

 Software maintenance

30/10/2014 Chapter 9 Software Evolution 27

Software maintenance

 Modifying a program after it has been put into use.

 The term is mostly used for changing custom software.
Generic software products are said to evolve to create
new versions.
 Maintenance does not normally involve major changes to
the system’s architecture.
 Changes are implemented by modifying existing
components and adding new components to the system.

30/10/2014 Chapter 9 Software Evolution 28

Types of maintenance

 Fault repairs
 Changing a system to fix bugs/vulnerabilities and correct
deficiencies in the way meets its requirements.
 Environmental adaptation
 Maintenance to adapt software to a different operating
environment
 Changing a system so that it operates in a different environment
(computer, OS, etc.) from its initial implementation.
 Functionality addition and modification
 Modifying the system to satisfy new requirements.

30/10/2014 Chapter 9 Software Evolution 29

Maintenance effort distribution

30/10/2014 Chapter 9 Software Evolution 30

Maintenance costs

 Usually greater than development costs (2* to

100* depending on the application).
 Affected by both technical and non-technical
factors.
 Increases as software is maintained.
Maintenance corrupts the software structure so
makes further maintenance more difficult.
 Ageing software can have high support costs
(e.g. old languages, compilers etc.).

30/10/2014 Chapter 9 Software Evolution 31

Maintenance costs

 It is usually more expensive to add new features to a

system during maintenance than it is to add the same
features during development
 A new team has to understand the programs being maintained
 Separating maintenance and development means there is no
incentive for the development team to write maintainable
software
 Program maintenance work is unpopular
• Maintenance staff are often inexperienced and have limited domain
knowledge.
 As programs age, their structure degrades and they become
harder to change

30/10/2014 Chapter 9 Software Evolution 32

Maintenance prediction

 Maintenance prediction is concerned with assessing

which parts of the system may cause problems and have
high maintenance costs
 Change acceptance depends on the maintainability of the
components affected by the change;
 Implementing changes degrades the system and reduces its
maintainability;
 Maintenance costs depend on the number of changes and costs
of change depend on maintainability.

30/10/2014 Chapter 9 Software Evolution 33

Maintenance prediction

30/10/2014 Chapter 9 Software Evolution 34

Change prediction

 Predicting the number of changes requires and

understanding of the relationships between a system
and its environment.
 Tightly coupled systems require changes whenever the
environment is changed.
 Factors influencing this relationship are
 Number and complexity of system interfaces;
 Number of inherently volatile system requirements;
 The business processes where the system is used.

30/10/2014 Chapter 9 Software Evolution 35

Complexity metrics

 Predictions of maintainability can be made by assessing

the complexity of system components.
 Studies have shown that most maintenance effort is
spent on a relatively small number of system
components.
 Complexity depends on
 Complexity of control structures;
 Complexity of data structures;
 Object, method (procedure) and module size.

30/10/2014 Chapter 9 Software Evolution 36

Process metrics

 Process metrics may be used to assess maintainability

 Number of requests for corrective maintenance;
 Average time required for impact analysis;
 Average time taken to implement a change request;
 Number of outstanding change requests.
 If any or all of these is increasing, this may indicate a
decline in maintainability.

30/10/2014 Chapter 9 Software Evolution 37

Software reengineering

 Restructuring or rewriting part or all of a

legacy system without changing its
functionality.
 Applicable where some but not all sub-systems
of a larger system require frequent
maintenance.
 Reengineering involves adding effort to make
them easier to maintain. The system may be re-
structured and re-documented.

30/10/2014 Chapter 9 Software Evolution 38

Advantages of reengineering

 Reduced risk
 There is a high risk in new software development. There may be
development problems, staffing problems and specification
problems.
 Reduced cost
 The cost of re-engineering is often significantly less than the
costs of developing new software.

30/10/2014 Chapter 9 Software Evolution 39

The reengineering process

30/10/2014 Chapter 9 Software Evolution 40

Reengineering process activities

 Source code translation

 Convert code to a new language.
 Reverse engineering
 Analyse the program to understand it;
 Program structure improvement
 Restructure automatically for understandability;
 Program modularisation
 Reorganise the program structure;
 Data reengineering
 Clean-up and restructure system data.

30/10/2014 Chapter 9 Software Evolution 41

Reengineering approaches

30/10/2014 Chapter 9 Software Evolution 42

Reengineering cost factors

 The quality of the software to be reengineered.

 The tool support available for reengineering.
 The extent of the data conversion which is required.
 The availability of expert staff for reengineering.
 This can be a problem with old systems based on technology
that is no longer widely used.

30/10/2014 Chapter 9 Software Evolution 43

Refactoring

 Refactoring is the process of making improvements to a

program to slow down degradation through change.
 You can think of refactoring as ‘preventative
maintenance’ that reduces the problems of future
change.
 Refactoring involves modifying a program to improve its
structure, reduce its complexity or make it easier to
understand.
 When you refactor a program, you should not add
functionality but rather concentrate on program
improvement.
30/10/2014 Chapter 9 Software Evolution 44
Refactoring and reengineering

 Re-engineering takes place after a system has been

maintained for some time and maintenance costs are
increasing. You use automated tools to process and re-
engineer a legacy system to create a new system that is
more maintainable.
 Refactoring is a continuous process of improvement
throughout the development and evolution process. It is
intended to avoid the structure and code degradation
that increases the costs and difficulties of maintaining a
system.

30/10/2014 Chapter 9 Software Evolution 45

‘Bad smells’ in program code

 Duplicate code
 The same or very similar code may be included at different
places in a program. This can be removed and implemented as
a single method or function that is called as required.
 Long methods
 If a method is too long, it should be redesigned as a number of
shorter methods.
 Switch (case) statements
 These often involve duplication, where the switch depends on
the type of a value. The switch statements may be scattered
around a program. In object-oriented languages, you can often
use polymorphism to achieve the same thing.

30/10/2014 Chapter 9 Software Evolution 46

‘Bad smells’ in program code

 Data clumping
 Data clumps occur when the same group of data items (fields in
classes, parameters in methods) re-occur in several places in a
program. These can often be replaced with an object that
encapsulates all of the data.
 Speculative generality
 This occurs when developers include generality in a program in
case it is required in the future. This can often simply be
removed.

30/10/2014 Chapter 9 Software Evolution 47

Key points

 Software development and evolution can be thought of

as an integrated, iterative process that can be
represented using a spiral model.
 For custom systems, the costs of software maintenance
usually exceed the software development costs.
 The process of software evolution is driven by requests
for changes and includes change impact analysis,
release planning and change implementation.
 Legacy systems are older software systems, developed
using obsolete software and hardware technologies, that
remain useful for a business.
30/10/2014 Chapter 9 Software Evolution 48
Key points

 It is often cheaper and less risky to maintain a legacy

system than to develop a replacement system using
modern technology.
 The business value of a legacy system and the quality of
the application should be assessed to help decide if a
system should be replaced, transformed or maintained.
 There are 3 types of software maintenance, namely bug
fixing, modifying software to work in a new environment,
and implementing new or changed requirements.

30/10/2014 Chapter 9 Software Evolution 49

Key points

 Software re-engineering is concerned with re-structuring

and re-documenting software to make it easier to
understand and change.
 Refactoring, making program changes that preserve
functionality, is a form of preventative maintenance.

30/10/2014 Chapter 9 Software Evolution 50