Chapter 9 – Software Evolution
Summary
Chapter 9 Software evolution 1
Topics covered
• Evolution processes
– Change processes for software systems
• Program evolution dynamics
– Understanding software evolution
• Software maintenance
– Making changes to operational software systems
• Legacy system management
– Making decisions about software change
Chapter 9 Software evolution 2
Software change
• Software change is inevitable
– New requirements emerge when the software is used;
– The business environment changes;
– Errors must be repaired;
– New computers and equipment is added to the system;
– The performance or reliability of the system may have to be improved.
• A key problem for all organizations is implementing and
managing change to their existing software systems.
Chapter 9 Software evolution 3
Importance of evolution
• Organisations have huge investments in their
software systems - they are critical business
assets.
• To maintain the value of these assets to the
business, they must be changed and updated.
• The majority of the software budget in large
companies is devoted to changing and
evolving existing software rather than
developing new software.
Chapter 9 Software evolution 4
A spiral model of development and
evolution
Chapter 9 Software evolution 5
Evolution and servicing
Chapter 9 Software evolution 6
Evolution and servicing
• Evolution
– The stage in a software system’s life cycle where it is in
operational use and is evolving as new requirements are
proposed and implemented in the system.
• Servicing
– At this stage, the software remains useful but the only
changes made are those required to keep it operational i.e.
bug fixes and changes to reflect changes in the software’s
environment. No new functionality is added.
• Phase-out
– The software may still be used but no further changes are
made to it.
Chapter 9 Software evolution 7
Evolution processes
• Software evolution processes depend on
– The type of software being maintained;
– The development processes used;
– The skills and experience of the people involved.
• Proposals for change are the driver for system
evolution.
– Should be linked with components that are affected
by the change, thus allowing the cost and impact of
the change to be estimated.
• Change identification and evolution continues
throughout the system lifetime.
Chapter 9 Software evolution 8
Change identification and evolution
processes
Chapter 9 Software evolution 9
The software evolution process
Chapter 9 Software evolution 10
Change implementation
Chapter 9 Software evolution 11
Change implementation
• Iteration of the development process where the
revisions to the system are designed, implemented and
tested.
• A critical difference is that the first stage of change
implementation may involve program understanding,
especially if the original system developers are not
responsible for the change implementation.
• During the program understanding phase, you have to
understand how the program is structured, how it
delivers functionality and how the proposed change
might affect the program.
Chapter 9 Software evolution 12
Urgent change requests
• Urgent changes may have to be implemented
without going through all stages of the
software engineering process
– If a serious system fault has to be repaired to
allow normal operation to continue;
– If changes to the system’s environment (e.g. an OS
upgrade) have unexpected effects;
– If there are business changes that require a very
rapid response (e.g. the release of a competing
product).
Chapter 9 Software evolution 13
The emergency repair process
Chapter 9 Software evolution 14
Agile methods and evolution
• Agile methods are based on incremental
development so the transition from development
to evolution is a seamless one.
– Evolution is simply a continuation of the development
process based on frequent system releases.
• Automated regression testing is particularly
valuable when changes are made to a system.
• Changes may be expressed as additional user
stories.
Chapter 9 Software evolution 15
Handover problems
• Where the development team have used an agile
approach but the evolution team is unfamiliar with
agile methods and prefer a plan-based approach.
– The evolution team may expect detailed documentation to
support evolution and this is not produced in agile
processes.
• Where a plan-based approach has been used for
development but the evolution team prefer to use
agile methods.
– The evolution team may have to start from scratch
developing automated tests and the code in the system
may not have been refactored and simplified as is
expected in agile development.
Chapter 9 Software evolution 16
Program evolution dynamics
• Program evolution dynamics is the study of the
processes of system change.
• After several major empirical studies, Lehman
and Belady proposed that there were a number
of ‘laws’ which applied to all systems as they
evolved.
• There are sensible observations rather than laws.
They are applicable to large systems developed
by large organisations.
– It is not clear if these are applicable to other types of
software system.
Chapter 9 Software evolution 17
Change is inevitable
• The system requirements are likely to change
while the system is being developed because
the environment is changing. Therefore a
delivered system won't meet its requirements!
• Systems are tightly coupled with their environment. When a
system is installed in an
environment it changes that environment and
therefore changes the system requirements.
• Systems MUST be changed if they
are to remain useful in an environment.
Chapter 9 Software evolution 18
Lehman’s laws
Law Description
Continuing change A program that is used in a real-world environment must necessarily
change, or else become progressively less useful in that
environment.
Increasing As an evolving program changes, its structure tends to become more
complexity complex. Extra resources must be devoted to preserving and
simplifying the structure.
Large program Program evolution is a self-regulating process. System attributes
evolution such as size, time between releases, and the number of reported
errors is approximately invariant for each system release.
Organizational Over a program’s lifetime, its rate of development is approximately
stability constant and independent of the resources devoted to system
development.
Chapter 9 Software evolution 19
Lehman’s laws
Law Description
Conservation of familiarity Over the lifetime of a system, the incremental change in each
release is approximately constant.
Continuing growth The functionality offered by systems has to continually
increase to maintain user satisfaction.
Declining quality The quality of systems will decline unless they are modified to
reflect changes in their operational environment.
Feedback system Evolution processes incorporate multiagent, multiloop
feedback systems and you have to treat them as feedback
systems to achieve significant product improvement.
Chapter 9 Software evolution 20
Applicability of Lehman’s laws
• Lehman’s laws seem to be generally applicable to
large, tailored systems developed by large
organisations.
– Confirmed in early 2000’s by work by Lehman on the
FEAST project.
• It is not clear how they should be modified for
– Shrink-wrapped software products;
– Systems that incorporate a significant number of COTS
components;
– Small organisations;
– Medium sized systems.
Chapter 9 Software evolution 21
Key points
• Software development and evolution can be thought of
as an integrated, iterative process that can be
represented using a spiral model.
• For custom systems, the costs of software maintenance
usually exceed the software development costs.
• The process of software evolution is driven by requests
for changes and includes change impact analysis,
release planning and change implementation.
• Lehman’s laws, such as the notion that change is
continuous, describe a number of insights derived from
long-term studies of system evolution.
Chapter 9 Software evolution 22
Software maintenance
• Modifying a program after it has been put into
use.
• The term is mostly used for changing custom
software. Generic software products are said to
evolve to create new versions.
• Maintenance does not normally involve major
changes to the system’s architecture.
• Changes are implemented by modifying existing
components and adding new components to the
system.
Chapter 9 Software evolution 23
Types of maintenance
• Maintenance to repair software faults
– Changing a system to correct deficiencies in the way meets its
requirements.
• Maintenance to adapt software to a different operating
environment
– Changing a system so that it operates in a different environment
(computer, OS, etc.) from its initial implementation.
• Maintenance to add to or modify the system’s functionality
– Modifying the system to satisfy new requirements.
Chapter 9 Software evolution 24
Figure 9.8 Maintenance effort
distribution
Chapter 9 Software evolution 25
Maintenance costs
• Usually greater than development costs (2* to
100* depending on the application).
• Affected by both technical and non-technical
factors.
• Increases as software is maintained.
Maintenance corrupts the software structure so
makes further maintenance more difficult.
• Ageing software can have high support costs
(e.g. old languages, compilers etc.).
Chapter 9 Software evolution 26
Figure 9.9 Development and
maintenance costs
Chapter 9 Software evolution 27
Maintenance cost factors
• Team stability
– Maintenance costs are reduced if the same staff are involved with
them for some time.
• Contractual responsibility
– The developers of a system may have no contractual responsibility for
maintenance so there is no incentive to design for future change.
• Staff skills
– Maintenance staff are often inexperienced and have limited domain
knowledge.
• Program age and structure
– As programs age, their structure is degraded and they become harder
to understand and change.
Chapter 9 Software evolution 28
Maintenance prediction
• Maintenance prediction is concerned with assessing which
parts of the system may cause problems and have high
maintenance costs
– Change acceptance depends on the maintainability of the components
affected by the change;
– Implementing changes degrades the system and reduces its
maintainability;
– Maintenance costs depend on the number of changes and costs of
change depend on maintainability.
Chapter 9 Software evolution 29
Maintenance prediction
Chapter 9 Software evolution 30
Change prediction
• Predicting the number of changes requires and understanding
of the relationships between a system and its environment.
• Tightly coupled systems require changes whenever the
environment is changed.
• Factors influencing this relationship are
– Number and complexity of system interfaces;
– Number of inherently volatile system requirements;
– The business processes where the system is used.
Chapter 9 Software evolution 31
Complexity metrics
• Predictions of maintainability can be made by assessing the
complexity of system components.
• Studies have shown that most maintenance effort is spent on
a relatively small number of system components.
• Complexity depends on
– Complexity of control structures;
– Complexity of data structures;
– Object, method (procedure) and module size.
Chapter 9 Software evolution 32
Process metrics
• Process metrics may be used to assess
maintainability
– Number of requests for corrective maintenance;
– Average time required for impact analysis;
– Average time taken to implement a change
request;
– Number of outstanding change requests.
• If any or all of these is increasing, this may
indicate a decline in maintainability.
Chapter 9 Software evolution 33
System re-engineering
• Re-structuring or re-writing part or all of a
legacy system without changing its
functionality.
• Applicable where some but not all sub-systems
of a larger system require frequent
maintenance.
• Re-engineering involves adding effort to make
them easier to maintain. The system may be re-structured and
re-documented.
Chapter 9 Software evolution 34
Advantages of reengineering
• Reduced risk
– There is a high risk in new software development.
There may be development problems, staffing
problems and specification problems.
• Reduced cost
– The cost of re-engineering is often significantly
less than the costs of developing new software.
Chapter 9 Software evolution 35
The reengineering process
Chapter 9 Software evolution 36
Reengineering process activities
• Source code translation
– Convert code to a new language.
• Reverse engineering
– Analyse the program to understand it;
• Program structure improvement
– Restructure automatically for understandability;
• Program modularisation
– Reorganise the program structure;
• Data reengineering
– Clean-up and restructure system data.
Chapter 9 Software evolution 37
Reengineering approaches
Chapter 9 Software evolution 38
Reengineering cost factors
• The quality of the software to be
reengineered.
• The tool support available for reengineering.
• The extent of the data conversion which is
required.
• The availability of expert staff for
reengineering.
– This can be a problem with old systems based on
technology that is no longer widely used.
Chapter 9 Software evolution 39
Preventative maintenance by
refactoring
• Refactoring is the process of making improvements to
a program to slow down degradation through change.
• You can think of refactoring as ‘preventative
maintenance’ that reduces the problems of future
change.
• Refactoring involves modifying a program to improve
its structure, reduce its complexity or make it easier to
understand.
• When you refactor a program, you should not add
functionality but rather concentrate on program
improvement.
Chapter 9 Software evolution 40
Refactoring and reengineering
• Re-engineering takes place after a system has
been maintained for some time and maintenance
costs are increasing. You use automated tools to
process and re-engineer a legacy system to create
a new system that is more maintainable.
• Refactoring is a continuous process of
improvement throughout the development and
evolution process. It is intended to avoid the
structure and code degradation that increases
the costs and difficulties of maintaining a system.
Chapter 9 Software evolution 41
‘Bad smells’ in program code
• Duplicate code
– The same or very similar code may be included at different
places in a program. This can be removed and implemented as a
single method or function that is called as required.
• Long methods
– If a method is too long, it should be redesigned as a number of
shorter methods.
• Switch (case) statements
– These often involve duplication, where the switch depends on
the type of a value. The switch statements may be scattered
around a program. In object-oriented languages, you can often
use polymorphism to achieve the same thing.
Chapter 9 Software evolution 42
‘Bad smells’ in program code
• Data clumping
– Data clumps occur when the same group of data
items (fields in classes, parameters in methods)
re-occur in several places in a program. These can
often be replaced with an object that
encapsulates all of the data.
• Speculative generality
– This occurs when developers include generality in
a program in case it is required in the future. This
can often simply be removed.
Chapter 9 Software evolution 43
Legacy system management
• Organisations that rely on legacy systems must choose a
strategy for evolving these systems
– Scrap the system completely and modify business processes so that it
is no longer required;
– Continue maintaining the system;
– Transform the system by re-engineering to improve its maintainability;
– Replace the system with a new system.
• The strategy chosen should depend on the system quality and
its business value.
Chapter 9 Software evolution 44
An example of a legacy system
assessment
Chapter 9 Software evolution 45
Legacy system categories
• Low quality, low business value
– These systems should be scrapped.
• Low-quality, high-business value
– These make an important business contribution but are expensive to
maintain. Should be re-engineered or replaced if a suitable system is
available.
• High-quality, low-business value
– Replace with COTS, scrap completely or maintain.
• High-quality, high business value
– Continue in operation using normal system maintenance.
Chapter 9 Software evolution 46
Business value assessment
• Assessment should take different viewpoints
into account
– System end-users;
– Business customers;
– Line managers;
– IT managers;
– Senior managers.
• Interview different stakeholders and collate
results.
Chapter 9 Software evolution 47
Issues in business value assessment
• The use of the system
– If systems are only used occasionally or by a small number of
people, they may have a low business value.
• The business processes that are supported
– A system may have a low business value if it forces the use of
inefficient business processes.
• System dependability
– If a system is not dependable and the problems directly affect
business customers, the system has a low business value.
• The system outputs
– If the business depends on system outputs, then the system has
a high business value.
Chapter 9 Software evolution 48
System quality assessment
• Business process assessment
– How well does the business process support the
current goals of the business?
• Environment assessment
– How effective is the system’s environment and
how expensive is it to maintain?
• Application assessment
– What is the quality of the application software
system?
Chapter 9 Software evolution 49
Business process assessment
• Use a viewpoint-oriented approach and seek answers from
system stakeholders
– Is there a defined process model and is it followed?
– Do different parts of the organisation use different processes for the
same function?
– How has the process been adapted?
– What are the relationships with other business processes and are
these necessary?
– Is the process effectively supported by the legacy application
software?
• Example - a travel ordering system may have a low business
value because of the widespread use of web-based ordering.
Chapter 9 Software evolution 50
Factors used in environment
assessment
Factor Questions
Supplier stability Is the supplier still in existence? Is the supplier financially stable and
likely to continue in existence? If the supplier is no longer in business,
does someone else maintain the systems?
Failure rate Does the hardware have a high rate of reported failures? Does the
support software crash and force system restarts?
Age How old is the hardware and software? The older the hardware and
support software, the more obsolete it will be. It may still function
correctly but there could be significant economic and business
benefits to moving to a more modern system.
Performance Is the performance of the system adequate? Do performance
problems have a significant effect on system users?
Chapter 9 Software evolution 51
Factors used in environment
assessment
Factor Questions
Support requirements What local support is required by the hardware and
software? If there are high costs associated with this
support, it may be worth considering system replacement.
Maintenance costs What are the costs of hardware maintenance and support
software licences? Older hardware may have higher
maintenance costs than modern systems. Support software
may have high annual licensing costs.
Interoperability Are there problems interfacing the system to other systems?
Can compilers, for example, be used with current versions
of the operating system? Is hardware emulation required?
Chapter 9 Software evolution 52
Factors used in application assessment
Factor Questions
Understandability How difficult is it to understand the source code of the current
system? How complex are the control structures that are used?
Do variables have meaningful names that reflect their function?
Documentation What system documentation is available? Is the documentation
complete, consistent, and current?
Data Is there an explicit data model for the system? To what extent is
data duplicated across files? Is the data used by the system up to
date and consistent?
Performance Is the performance of the application adequate? Do performance
problems have a significant effect on system users?
Chapter 9 Software evolution 53
Factors used in application assessment
Factor Questions
Programming language Are modern compilers available for the programming
language used to develop the system? Is the programming
language still used for new system development?
Configuration Are all versions of all parts of the system managed by a
management configuration management system? Is there an explicit
description of the versions of components that are used in
the current system?
Test data Does test data for the system exist? Is there a record of
regression tests carried out when new features have been
added to the system?
Personnel skills Are there people available who have the skills to maintain the
application? Are there people available who have experience
with the system?
Chapter 9 Software evolution 54
System measurement
• You may collect quantitative data to make an
assessment of the quality of the application
system
– The number of system change requests;
– The number of different user interfaces used by
the system;
– The volume of data used by the system.
Chapter 9 Software evolution 55
Key points
• There are 3 types of software maintenance, namely bug
fixing, modifying software to work in a new environment,
and implementing new or changed requirements.
• Software re-engineering is concerned with re-structuring
and re-documenting software to make it easier to
understand and change.
• Refactoring, making program changes that preserve
functionality, is a form of preventative maintenance.
• The business value of a legacy system and the quality of the
application should be assessed to help decide if a system
should be replaced, transformed or maintained.
Chapter 9 Software evolution 56
