autosar-classic

Open source AUTOSAR classic platform forked from the Arctic Core

A set of python modules for working with AUTOSAR XML files

Autosar Configurator for ECU GUI based configuration, checking and code generation.

AutosarFactory is a python package which helps user to read/create/modify AUTOSAR standard arxml files.

This repository contains the contribution of an "AUTOSAR Classic Playground" from Da Vinci Engineering GmbH to the open-source community. It has to be considered a continuous work in progress.

Can Network Managment module implementation for AUTOSAR 4.4.0 Classic Platform.

CAN (Controller Area Network) bus system to simulate transmitter and receiver signals between the powertrain and ECU (Electric Control Unit) of the vehicles with MATLAB/Simulink Vehicle Network Toolbox

An Autosar arxml general serializer and deserializer

AUTOSAR Classic BSW concepts (COM, DEM, SchM, RTE) implemented from scratch on STM32F4 + FreeRTOS. Demonstrates EPS race condition and its implicit RTE solution.

Helper class to extract needed information from arxml and vice versa

SecOC Simulation using Python

TOPPERS 2nd Gen configurator

AUTOSAR Classic OS training

Working with CANFD using MCAL CAN driver and CANIF module in the NXP S32K144EVB.

Playground for AUTOSAR classic OS

Throttle Position Control with Simscape and AUTOSAR Standards

project required for Siemens EDA Embedded training. (12 sessions in 3 months of training)

Autosar classic project from scratch using a notepad!

Working with the primary MCAL drivers in the MODULARS1 - NXP S32K144EVB board.