miapd — the IA_PD that's Missing In Arista.
A DHCPv6 Prefix Delegation client daemon for Arista EOS. Point it at an upstream that delegates IPv6 prefixes and your switch renumbers itself: miapd acquires a delegation, hands out smaller allocations to your downstream interfaces, and keeps addressing and router advertisements in sync so hosts autoconfigure — even when the upstream delegation changes.
Design doc: docs/design.md.
- Acquires a delegated prefix via DHCPv6 (IA_PD) and keeps it renewed
- Allocates a smaller prefix from the delegation to each configured downstream interface, addressing the switch itself on each
- Drives EOS's native router advertisements so downstream hosts autoconfigure
- Migrates gracefully when the delegation changes: new prefix installed first, old one deprecated through a drain window, then withdrawn
- Survives restarts — resumes its persisted lease without re-soliciting
- Reports live status in
show daemon miapd: client state, delegated prefix, per-interface allocations, last renewal, last error - Applies config changes at runtime, no restart needed
- Ships as a standard SWIX extension
crates/
miapd/ binary crate — daemon entrypoint, config, wiring
miapd-core/ domain types, PrefixPlanner, LeaseStore, EosControl trait
miapd-dhcp/ DHCPv6 IA_PD client state machine (RFC 8415, dhcproto)
miapd-eos/ real EosControl impl: SDK backend + eAPI backend
miapd-eos-sys/ cxx bridge + C++ shim to the EOS SDK (feature-gated)
Needed before the first build:
- Rust >= 1.92.0
justfor the build recipes- For SDK-enabled builds and SWIX packaging:
podman, plus the EOS SDK headers and the switch'slibeos— seecrates/miapd-eos-sys/README.mdfor the build-container recipe
Known working hardware:
- Arista DCS-7050SX3-48YC12-F, EOS 4.33.0F, EosSdk 2.23.1
Local development (no EOS SDK required — builds miapd-eos-sys as a stub):
just build
just test
just clippy
just package-swix # → target/swix/miapd-<version>.x86_64.swix
package-swix builds the release binary in the build container, wraps it
in an RPM installing /usr/bin/miapd, and produces the SWIX (a stored zip
of manifest.txt + the RPM — the same layout the on-switch
/usr/bin/swix create tool emits). Install it like any extension:
copy scp:.../miapd-0.1.0-1.x86_64.swix extension:
extension miapd-0.1.0-1.x86_64.swix
copy installed-extensions boot-extensions
The daemon needs eAPI's local unix-socket endpoint enabled (no network listener required):
management api http-commands
protocol unix-socket
no shutdown
Then register it as an EOS daemon (the binary name must not contain dashes — EOS rejects them):
daemon miapd
exec /usr/bin/miapd
option upstream-interface value Vlan100
option prefix-hint-length value 56
option downstream value Ethernet1:0:1,Ethernet2:1:beef
option max-drain-seconds value 60
no shutdown
Don't configure static IPv6 addresses on managed downstream interfaces — they'd displace the delegated address.
GPLv3. See LICENSE. The EOS SDK (BSD-3-Clause) and bundled
SQLite (public domain) are permissive dependencies compatible with GPLv3.