A countdown timer for Chrome that you set in a single click. Hover the dial, click, and it starts — no typing and no numbers to enter.
It keeps counting when you close the popup and when you restart Chrome. The minutes left stay on the toolbar badge, and when the time is up an alarm rings and a notification tells you — even when no timer is on screen.
- Teachers, running a timed activity on the classroom projector
- Presenters and conference hosts, timing breaks and sessions
- Anyone using a Pomodoro-style focus timer who does not want another app open
- Anywhere a desktop timer helps and a whole application would not
Install it from the Chrome Web Store. The store still serves the previous generation of the timer (8.3.1); the rewrite in this repository (9.0.0) is submitted and awaiting review. To run it now, build from source — see CONTRIBUTING.md.
1-click timer needs Chrome 116 or newer. It uses chrome.runtime.getContexts to
bring an open timer tab to the front when the alarm rings.
To run the current source instead, see CONTRIBUTING.md.
Move the pointer over the dial — anywhere except the small readout disc in the middle. The face draws a preview arc showing the duration you are choosing, with its numeral at the end of the arc. Click to start it.
To skip the dial, click a numeral on the ring and the timer starts at that many minutes. The 0 is the exception: it marks where a whole turn ends, so clicking it resets the timer.
Setting a timer is always one click, even while another timer is already running.
The play/pause control sits in the bottom-left corner of the dial: a pause glyph while the timer runs, a play glyph while it is paused. Clicking it stops or resumes.
Hover the readout disc in the centre and a restart glyph appears while the timer is paused or the alarm is ringing. It runs the last duration again from the start: set a timer for 10 minutes, pause it at 5, and Restart runs the full 10 minutes. While the timer is running — use the corner control to pause it first — or once you have reset it, there is nothing to restart, so the disc stays bare.
The alarm chimes for as long as you chose in the settings — 10 seconds by default. It rings even when the popup is closed: the sound comes from the extension, not from the timer on screen. The toolbar icon turns red while it sounds and returns to normal when it stops.
A notification appears, and the timer window — or a new one, if none is open — comes to the front so you can see what is ringing.
To silence the alarm you can use the notification's own buttons: Stop, and Restart. Stop silences the alarm and resets the timer — exactly what closing the notification does. Restart silences it too, and immediately starts a new countdown of the same length. The timer's own controls do the same: the restart glyph on the readout disc, or the Stop control in the bottom-left corner. Whichever you use, the sound stops at once, so an alarm you have acknowledged never rings on. Resetting the timer — or dismissing the notification — also clears the notification if it is still showing.
The corners of the dial's square hold four controls: mute (top left), fullscreen (top right), play/pause (bottom left) and settings (bottom right). To stop a timer and clear the remaining time, click the 0 numeral — or use the Stop control in the bottom-left corner while the alarm is ringing.
The fullscreen control opens the same timer in a tab — or, if you already have that tab open, brings it to the front (even from another window) — and pressed again in that tab it goes full screen. Its glyph shows which way it will go.
The gear opens the settings screen in a new tab:
- Appearance — the mode (light, dark, or device, which follows your system and is the default) and the remaining-time colour: a conic sweep frozen when the timer starts, a gradient that follows the time left, red, or green
- Alarm — the volume, a choice of chime (Chime, Beep, Bell or Silent) with a preview button, and how long the alarm rings (5 seconds to 5 minutes)
- Reset to defaults
Your settings sync across your own Chrome profiles.
- One click to start: hover the dial to preview a duration, click to set it
- Or click a numeral to start that many minutes
- Keeps counting when you close the popup or restart Chrome
- Remaining minutes on the toolbar badge, moving from green through orange to red as time runs out
- An alarm that rings for a length you choose and sounds even with the popup closed
- A notification with Stop and Restart buttons, plus the timer brought to the front, so it is clear what is ringing and how to stop or repeat it
- Light and dark appearance, following your system by default
- A remaining-time colour of your choice — a conic sweep frozen when the timer starts, a gradient that follows the time left, red, or green
- A full-screen view for a timer you can watch from across the room
The badge counts whole minutes and never seconds, because Chrome only wakes a background extension about once a minute.
No account, no sign-in, no analytics and no network requests. The timer and your preferences stay on your device, and preferences sync through your own Chrome profile.
The extension asks for four permissions, and for no access to the pages you visit:
alarms to fire the alert at the right moment, notifications for the "time is
up" alert, storage to remember the timer and your settings, and offscreen to
play the alarm sound from a hidden page, so the alarm can ring with no timer
window open.
See PRIVACY.md.
Licensed under the GPL-3.0. Made in Sweden.