This project tries to integrate Elero Roller Shutter Motors better into ESPHome / Home Assistant than the native cover components. One major advantage is the possibility to use RolTop-J motors that allow the special venting position.
For other non -J motors, this project isn't really needed, but it doesn't hurt either. The advantage for other electronic (!) Elero motors could be the possiblity to easily get to motor into programming / wireless mode if the toggle switch is also included.
This has been tested with the following motors:
- Elero RolTop/D
- Elero RolTop/D+
- Elero RolTop-J 868
- Elero RolTop/D 868
- Elero RolTop/D+ 868
- Elero RolTop 868
- Elero RolMotion/D+
- Elero RolSmart