Anu - compact stick mouse.
Gerber files and stl models can be downloaded in releases.
- PSP analog stick
- 3 keys, Kailh Choc V1 switches
- Choc spacing
- Direct pins
- Wireless(optional)
- Per switch RGB(optional)
- Power switch for wireless controllers(optional)
- 100x100 mm panel pcb
Anu can be used with nRFMicro or nice!nano and 301230 batteries for wireless mode. Currently ZMK does not support analog sticks.
The original idea was to create a compact "mouse" (layout), but it can also be used as a gamepad. Gamepad firmare use ArduinoGamepad library. For more detailed settings of the gamepad, you can use TocaEdit XBOX 360 CE.
You can use the threeboard layout to enter text using Anu.
Other configs using the analog stick 1 & 2.
Work on ZMK support is also in progress.
| Item | Quantity | Remarks |
|---|---|---|
| proMicro | 1 | or any other compatible controller |
| Kailh Choc V1 | 3 switches | |
| FJ08K-S or FJ08K | 1 | analog stick. FJ08K-S has an additional button |
| Keycaps | 3 | 1U |
| YS-SK6812MINI-E | 3 | RGB leds |
| Magnets | 3-5 | disc 7x2 mm (for case) |
| Bumpon | 8 | 5x2 mm |
| Sockets PH3.5 | 12x2 | for controller |
| SMD button 3x4x2mm | 1 | for reset |
| MSK-12C02 | 1 | Power switch (wireless only) |
| 301230 | 1 | Battery (wireless only) |
| m2 nuts | 4 | for case |
| m2x4 screws | 4 | for case |
- Solder the controller sockets
- Solder the power switch (wireless only)
- Solder the reset button
- Solder the battery (only for wireless version)
- Solder analog stick
- Solder the pins into the controller
- Solder 3 Kailh Choc V1 switches
- Solder 3 LEDs (RGB version only)
- Put the keycaps on the switches and analog stick
- Stick bumpon or place the keyboard in the case
- Insert controller into sockets
- Flash the bootloader (see the official manual for the controller)
- Flash the firmware (see the official manual for the controller)