This code was thrown together and used during a presentation to Mined Minds. It uses a Raspberry Pi with a Camera Module and a Relay Board to detect motion in video frames using OpenCV. Still images are recorded during motion and a relay is activated and then deactivated after 5 seconds of no motion.

• Install Raspbian Lite image on Micro SD card.
• Enable SSH access by creating a “ssh” file on the SD card.
• Install Apache Web Server
  • sudo apt-get install apache2 –y
  • sudo chown pi:pi /var/www/html
• Install Git
  • sudo apt-get install git –y
• Install OpenCV 3.4.0
  • https://www.life2coding.com/install-opencv-3-4-0-python-3-raspberry-pi-3/