Skip to content

About

Repository of repeaters/frequencies for use in CHIRP software. Primarily for N2YCR club, but anyone can use.

Resources

Contributing

Security policy

Stars

5 stars

Watchers

0 watching

Forks

Repository files navigation

What is this?

These are CSV files suitable for copying / pasting into CHIRP to configure amateur radio HTs.

The repeaters are local to NYC and intended for use in helping new hams get on the air.

Thanks to N2YCR for the idea.

How do I use this?

There are two options. If you want to both listen and talk, then you need to:

  1. Get a ham license
  2. Get a HT, like a Baofeng UV-5R or similar
  3. Download CHIRP
  4. Find the repeaters of interest to you in these CSV files and copy/paste into Chirp

If you just want to listen, not talk, then you don't need a license:

  1. Get an HT, like a Baofeng UV-5R or similar. DO NOT PRESS THE PTT BUTTON
  2. Download CHIRP
  3. Find the repeaters of interest to you in these CSV files and copy/paste into Chirp
  4. Listen, without pushing PTT

Alternatively, you could get an SDR dongle to plug into your computer and tune to the frequencies noted in this repo. Since SDR's don't typically transmit, you're fine.

Files and Contents

Contributing

This list was originally put together by KE2EHU, but contributions are welcome! See contributing for details on how to contribute.

About

Repository of repeaters/frequencies for use in CHIRP software. Primarily for N2YCR club, but anyone can use.

Resources

Contributing

Security policy

Stars

5 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors