-
Design inspired by Kanrog's Kobra S1 bed frame.
-
Actively managed and updated by IDOLABS, also on Printables.
-
I only had basic tools to build this when I was designing this - Easy assembly guaranteed.
-
It shines more when you swap the board.
-
I am on Funssor!
-
You can take the drawing file with the places to tap the threads for such CNC services like PCBWay/JLCCNC. I also found sheet metal cheaper than CNCs, so try them if possible.
-
If you plan to upgrade more than just a bed, there you go. (Work in progress.)
| All K1 printers | Only for MAX | Caution |
|---|---|---|
| D3D 5015 / BCJ 4010 | D3D 5015 (remix) | 5015 mounts cannot be used with Triple Z. |
| Triple Z + Cableseal | Doorplug | You need to swap the mainboard first. |
| Level nuts | (none) | You may sometimes need to adjust the screw length. See BOM for extra details. |
-
Major thanks to Henlor for building the tough foundation for this experiment project. Take a look at what he did for the Creality K1.
-
My frame is made out of aluminum 6061, weighing down to 325 g. The stock frame measured about 1.5 kg. You can reduce it down to ~25% of the original weight.
-
PLEASE ORDER THE FRAME WITH
>5 mmTHICKNESS. Otherwise it will immediately bend into a taco you didn't order from Chipotle. -
This frame does NOT support the LiDAR sensor. You'll need to calibrate the filament yourself.
-
I also provided the STEP file, so feel free to add your own fixes. I appreciate your work. When using without the load cells, you can fix the bed with four solid mounts.
- See Printables for Changelogs and Updates.
- It shouldn't take too long, but please, I beg you to turn off your printer before doing this.
| Name | Qty | Link | Caution |
|---|---|---|---|
| Spacers (3*5*3 mm) | 6 | Find in folder "Misc" | You may need a few spares. |
| Spring bed mounts (M4, Ø12 mm) | 4 | Spring - Aliexpress / Amazon | May be hard to tighten at first; Be careful not to bend the frame. Buy EITHER the spring OR the silicone. |
| Silicone bed mounts (M4, Ø12 mm) | 4 | Silicone - Aliexpress / Amazon | May not reach the nozzle with a 12 mm height with the Oldham; I recommend 14 mm spacers. |
| M4*25/28/30 mm FHCS screws | 4 | Aliexpress / Amazon | It heavily depends on the bed mounts and the bed itself that you used. Start with a 30 mm screw, tune it down till you get a good bed mesh, and use shorter ones. |
| M3*8 SHCS/BHCS | 13 | Aliexpress / Amazon | Use this screw for the PRTouch PCB and Z mounts. You'll typically have 3 spares. If you used all 13 screws, are you using this? |
| M3*6 BHCS | 16 | Aliexpress / Amazon | They are used on load cells. If you use a printed mount, check their BOM. |
| Nylon ties | 5* | Aliexpress / Amazon | You can typically get a truckload of these for about $5. I recommend you to buy more than 25. |
| RGB stick (158 mm for stock mounts) | 1 | Aliexpress / Amazon | I designed the entire frame for this stick only. Alternative mounts are coming soon, so stay tuned. |