hsup [DEPRECATED]

This project is officially retired and no longer maintained.

Supervises processes that are configured in a Heroku-esque way.

hsup can poll the Heroku API directly to obtain releases, configuration, and execution information. hsup can also watch a local directory that injects similar information.

The execution is performed with a chosen "dyno driver":

• The default dyno driver, simple, downloads and refreshes the environment only.
• The docker dyno driver both obtains the environment and executable code and runs it interposed on the heroku/cedar:14 image.
• The libcontainer driver is similar to the Docker driver, but runs containers in foreground, on top of Heroku official (read only) stack images. It needs to be executed as root (e.g.: sudo) and only works on Linux machines. See notes about running it in Docker (below) for nested (hsup-in-docker) support and execution on any host with Docker installed (e.g.: boot2docker).

Usage:

hsup COMMAND [options] [args...]

Where COMMAND is on one:

• run: Run a command with an app's environment.
• start: Start a process type as defined in an app's Procfile.

Example:

godep go install ./...
export DOCKER_HOST=unix:///var/run/docker.sock
export HEROKU_ACCESS_TOKEN=...

# start default process types inside Docker
hsup start -d docker start -a simple-brandur

# run command as subprocess
hsup run -d simple -a simple-brandur -- echo "hello"

Example using a directory:

godep go install ./...
export HSUP_CONTROL_DIR=/tmp/supctl
mkdir -p "$HSUP_CONTROL_DIR"
echo '{
    "Version": 1,
    "Env": {
        "NAME": "CONTENTS"
    },
    "Slug": "sample-slug.tgz",
    "Stack": "cedar-14",
    "Processes": [
        {
            "Args": ["./web-server", "arg"],
            "Quantity": 2,
            "Type": "web"
        },
        {
            "Args": ["./worker", "arg"],
            "Quantity": 2,
            "Type": "worker"
        }
    ]
}' > "$HSUP_CONTROL_DIR"/new
hsup run '/usr/bin/printenv'

# Note that after verifying the input, the file is moved to "loaded".
# Writing new "new" files is how updates can be issued.
ls "$HSUP_CONTROL_DIR"

If you are using boot2docker, do the necessary preparation to expand the available disk space for hsup data:

$ make boot2docker-init

Containers (hsup/libcontainer) inside containers (docker). Inception!

$ docker build -t hsup .
$ docker run --privileged -it hsup
# will run /usr/bin/printenv, see docker/example.json for details

The docker container by default runs hsup start --oneshot. For a custom hsup command, use:

$ docker run --privileged -it hsup run bash
(dyno console) ~ $

Stack images will be downloaded for each new fresh container. It is a good idea to share a common stack image directory between all containers to avoid downloading them every time:

$ docker run --privileged -v /var/lib/hsup:/var/lib/hsup -it hsup

A custom hsup control dir can be injected as a docker volume, in case custom json control files are required:

$ docker run --privileged -v /tmp/supctl:/etc/hsup -v /tmp/stacks:/var/lib/hsup/stacks -it hsup
(/tmp/supctl/new or /tmp/supctl/loaded will be used as the control file)

If you are using boot2docker (check the section above for details):

$ make boot2docker-init

To run several functional tests against a hsup binary:

$ godep go test ./ftest -driver docker -hsup <path-to-compiled-hsup-binary>

Different drivers (libcontainer, simple) can be specified with the driver flag, but note that the libcontainer driver requires root privileges:

$ sudo -E $(which godep) go test ./ftest -driver libcontainer -hsup <path-to-hsup-binary>

All tests can also be executed inside docker containers (see the hsup-inside-docker section above) with:

$ make ftest
runs libcontainer driver tests by default

$ make ftest driver=docker
specify a custom driver

$ make ftest-libcontainer
libcontainer driver tests...

$ make ftest-docker
docker driver tests...

$ make ftest-simple
simple driver tests...

Some drivers accept custom configuration via ENV.

• DOCKER_HOST
• DOCKER_CERT_PATH
• DOCKER_IMAGE_CACHE: when set, docker images are only built once per release.

• LIBCONTAINER_DYNO_SUBNET: a CIDR block to allocate dyno subnets (of size /30) from. It is 172.16.0.0/12 (RFC1918) by default when not set.
• LIBCONTAINER_DYNO_EXTRA_INTERFACE: interface on the host to inject into the dyno (currently as a ipvlan subinterface), together with its IP address CIDR in the format: hostIFName:IP/Mask. Eg.: eth1:10.0.0.10/24.
• LIBCONTAINER_DYNO_EXTRA_ROUTES: extra routes to add to the dyno network namespace main routing table. Format: IP/Mask:Gateway:IF,IP/Mask:Gateway,IF,..., example: 10.0.0.0/8:10.1.1.1:eth1,192.168.0.0/24:default:eth0. The special value default can be used as the gateway, and will be replaced with the dyno's default route gateway at runtime.
• LIBCONTAINER_DYNO_UID_MIN and LIBCONTAINER_DYNO_UID_MAX: Linux UIDs to use for each dyno. It also defines the maximum number of allowed dynos, as each dyno gets a unique UID per box. To avoid reusing subnets (IPs), make sure that (maxUID - minUID) <= /30 subnets that LIBCONTAINER_DYNO_SUBNET can provide. 172.17.0.0/16 can provide 2 ** (30-16) = 16384 subnets of size /30. In this case, to avoid subnets being reused, make sure that (maxUID - minUID) <= 16384.