Materials that are naturally insulators can temporarily become conductors after a dose of radiation. Immediately after irradiation, this radiation-induced-conductivity (RIC) is caused by free electrons and holes. After a short time, often mere nanoseconds, the free electrons and holes become trapped, and the remaining conductivity is often due to free ions diffusing through the material. This conductivity is measurable for minutes or even hours after irradiation ends. In quartz, the ions are alkalis and their diffusion occurs largely a single crystal axis. The python modules herein provide implementations of some special functions needed to calculate the decay of RIC with time.
There are two scripts here:
ric_meijer.py
ric_adaptive.py
Both scripts the provide the same functions but use different implementations. ric_meijer.py calculates the special functions using the Meijer G functions from the mpmath package. ric_adaptive.py calculates using adaptive integration. The Meijer G approach may be considered more elegant but, at present, the adaptive integration approach appears to be faster. This may change depending on the versions and/or hardware that you are using.
The special functions provided by these scripts are used in the following papers:
-
"Decay of radiation–induced–conductivity analyzed as a problem in one–dimensional ion diffusion," by John L Lawless, Radiation Measurements (2026):107733. https://doi.org/10.1016/j.radmeas.2026.107733
-
"An explanation for why measurements of alkali ion mobility in quartz have been so inconsistent," by John L Lawless, in preparation (2026)