Skip to content
kcibvPublic

About

Python library for ring flange structural calculations following IEC 61400-6 AMD1

Resources

Contributing

Stars

10 stars

Watchers

5 watching

Forks

Repository files navigation

This software is part of the Bolt and Beautiful project funded with subsidy from the Top Sector Energy of the Dutch Ministry of Economic Affairs.

PyFlange

PyFlange is an open-source Python library for the fatigue analysis of large bolted ring-flange connections, such as the L-flanges and T-flanges of offshore wind turbine towers, monopiles and transition pieces.

It implements the polynomial flange segment model of IEC 61400-6:2020+AMD1:2025 (Annex G.2, developed by Marc Seidel), which predicts the bolt axial force and bolt bending moment as functions of the tower shell force, including the effect of flange gaps and flange inclination. On top of it, PyFlange provides:

  • the L-flange and T-flange models of AMD1, and the changes proposed for ED2;
  • the check of the model validity (governing ULS failure mode);
  • standard metric bolts, nuts and washers;
  • design gap height distributions and a database of FEA shell stiffnesses;
  • the bolt fatigue assessment of IEC 61400-6 (S-N curve, Miner's rule);
  • random samplers for Monte Carlo simulations of the bolt fatigue damage;
  • a JSON case format and a command-line tool (pyflange) to run deterministic and Monte Carlo analyses without writing code.

PyFlange was developed within the Bolt & Beautiful GROW project by KCI, Siemens Gamesa, JBO and TNO.

The ULS features have not been thoroughly validated and tested yet. The ultimate shell forces Zu, Zu_A, Zu_B, Zu_D, Zu_E, the governing failure_mode and the validate() check that relies on it are covered by unit tests only, not by the validation against the SGRE reference workbooks. Please review these results before relying on them, and share your feedback, findings and comparisons with your own calculations by opening a GitHub issue.

Documentation: https://kcibv.github.io/pyflange/

Installation

PyFlange requires Python 3.9 or later:

py -m pip install pyflange

(python -m pip install pyflange on Linux and macOS.) New to Python? The Getting started guide explains every step on Windows.

Quick start

Command line

Download the example case fatigue-case.json and run:

py -m pyflange determ fatigue-case.json --xlsx         # deterministic fatigue analysis
py -m pyflange sample fatigue-case.json --seed 1       # Monte Carlo simulation
py -m pyflange stats fatigue-case-sample.csv           # statistics of the sample

See the command-line documentation and the JSON case format.

Python

from math import pi
from pyflange.bolts import StandardMetricBolt, RoundNut
from pyflange.flangesegments import PolynomialLFlangeSegment, Gap, shell_stiffness
from pyflange.stats import gap_height_distribution

mm, kN, MPa, deg = 0.001, 1000, 1e6, pi/180     # SI units throughout

D = 8000*mm                                     # tower outer diameter
gap_angle = 30*deg
gap_height = gap_height_distribution(D, 0.0014, gap_angle*D/2).ppf(0.95)   # AMD1 design gap

fseg = PolynomialLFlangeSegment(
    a = 150*mm, b = 122*mm, s = 54*mm, t = 172*mm, R = D/2,
    central_angle = 2*pi/156,                   # 156 bolts
    Zg = -18044*kN / 156,                       # dead weight per bolt
    bolt = StandardMetricBolt("M80", "10.9", shank_length=160*mm, stud=True),
    Fv = 2876*kN,                               # preload before losses
    Do = 86*mm, washer = None, nut = RoundNut("M80"),
    gap = Gap(height=gap_height, angle=gap_angle),
    k_shell = shell_stiffness(D/2, 54*mm, gap_angle))

fseg.validate()                                 # failure mode B must govern (S355 by default)

Fs = fseg.bolt_axial_force(500*kN)              # bolt force for a 500 kN shell force
Ms = fseg.bolt_bending_moment(500*kN)           # bolt bending moment

The fatigue analysis takes a Markov matrix of tower bending moments:

import numpy as np
from pyflange.fatigue import MarkovMatrix, BoltFatigueAnalysis

mkvm = MarkovMatrix(range    = np.array([100e6, 300e6, 500e6]),   # N·m
                    mean     = np.array([100e6, 100e6, 100e6]),   # N·m
                    cycles   = np.array([3e7, 1.5e5, 8e3]),
                    duration = 30)                                # years

fatigue = BoltFatigueAnalysis(fseg, mkvm)
print(fatigue.damage, fatigue.fatigue_life)

The tutorials cover L-flanges, T-flanges, design gap angles, ED2 and Monte Carlo simulations.

Development

git clone https://github.com/kcibv/pyflange.git
cd pyflange
py -m pip install -e . pytest -r docsrc/requirements.txt

py -m pytest                                                    # unit tests and tutorial examples
py validations/validate.py validations/references/*.json        # validation against the SGRE references
mkdocs serve                                                    # documentation preview

The documentation source is in docsrc/. GitHub workflows run the tests at every push, publish the documentation, one version per release, to the docs/ folder of main, served by GitHub Pages, and publish the package on PyPI when a pyflange-v<version> tag is pushed. See the developer guide.

Contributing

You can contribute to this project by reporting a bug, highlighting a necessary improvement, submitting a code improvement or by asking a question. For instructions about how to do all these things, please see our contribution guidelines.

Since the typical PyFlange user is expected not to be a professional programmer and probably not familiar with Git, we have created a Git tutorial for non-programmers to make contributing a less intimidating process.

License

pyFlange - python library for large flanges design Copyright (C) 2024 KCI The Engineers B.V., Siemens Gamesa Renewable Energy B.V., Nederlandse Organisatie voor toegepast-natuurwetenschappelijk onderzoek TNO.

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License, as published by the Free Software Foundation, either version 3 of the License, or any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License version 3 for more details.

You should have received a copy of the GNU General Public License version 3 along with this program. If not, see https://www.gnu.org/licenses/.

About

Python library for ring flange structural calculations following IEC 61400-6 AMD1

Resources

Contributing

Stars

10 stars

Watchers

5 watching

Forks

Releases

Packages

Used by

Contributors

Languages