NOTE: the most active branch is "pyside6" as we transition to support for Debian Trixie and beyond. There has been some work to back port to the "main" branch but it is starting to lag. At some point in the near future pyside6 will become default.
-------------- BELOW THIS LINE IS OUT OF DATE - TRANSITION TO pyside6 branch and Debian Trixie --------------
Monochrome style VCPs for LinuxCNC controlled Lathes, Mills and Plasma cutters.
Mill
Plasma
UPDATE NEEDED due to changes to use python virtual env framework <<<
If you have not already done so, install the QtPyVCP software dependencies
Dependency
Monokrom plasma requires the plasma_db branch from qtpyvcp. To get access to this branch it is recommended to use a developer install of qtpyvcp. If you already have such an install you will need to install sqlalchemy via pip.
If you have yet to install a developer version of qtpyvcp then BEFORE performing the pip install per normal dev instructions you need to
git checkout plasma_db
THEN
python3 -m pip install -e .
Install MonoKrom (includes mill and plasma VCPs)
The current Plasma development version which is under active development is located at: https://github.com/joco-nz/monokrom-vcp
If the Plasma UI is of interest then the recommended install is:
cd <directory where you want to have the git cloned repo>
git clone https://github.com/joco-nz/monokrom-vcp
cd monokrom-vcp
python3 -m pip install -e .
This will create an editable installe of Monokrom. To update to the latest development state cd into monokrom-vcp and perform
git pull
To install the MonoKrom LinuxCNC sim configs run:
monokrom --install-sim
This section collects the final "tweaks" that may be needed to get success.
[1] Ensure there is write access to /tmp The simplest is to assume the access permissions looks like:
drwxrwxrwt 26 root root 4096 Dec 20 21:26 tmp
If adjustment is needed use the command:
sudo chmod o+rw tmp
Designed by: @pinder
Forum Thread: forum.linuxcnc.org/qtpyvcp/40082