Stars
CDNET Protocol and CDBUS / CDNET C Library (The library is MCU-oriented.)
luweiqi / openpnp-capture
Forked from openpnp/openpnp-captureA cross platform video capture library with a focus on machine vision.
An OpenPnP compatible SMT pick and place machine based on OpenBuilds linear motion components.
A cross platform video capture library with a focus on machine vision.
The LoRaMesher library implements a distance-vector routing protocol for communicating messages among LoRa nodes.
OpenThread released by Google is an open-source implementation of the Thread networking protocol
OpenClaw 中文官方技能库 | 翻译自 Clawdbot 官方技能，按场景分类整理，支持中文自然语言调用
A collection of pre-trained, state-of-the-art models in the ONNX format
This is a pick-and-place machine feeder project compatible with OpenPnP. The design goal is to achieve an extremely low profile and enable low-cost manufacturing for integration into pick-and-place…
基于立创ESP32-S3-R8N8开发板的433MHz射频信号管理系统 支持手机WiFi连接控制，信号学习、存储、发送一键搞定！
μReflow Oven controller based on ESP32 with MicroPython & LVGL
Reflow Master is an open source Toaster Oven reflow controller that includes both hardware and software.
Arduino-compatible wireless reflow oven controller ecosystem of open-source hardware
Improvements made to the cheap T-962 reflow oven utilizing the _existing_ controller HW
Microsmt PNPv3 is a DIY kits for running OpenPnP.
XMotion V1 is an open-source 6-axis robotic arm controlled by STM32 H7 and EtherCAT. It runs real-time motion control with fixed-point trajectory planning and 1 ms synchronization. This version foc…
A complete introduction to motion planning algorithms — from RRT to RRT*, with visual demos and notes in Chinese. （从 RRT 到 RRT* 的路径规划入门教程，含可视化代码与中文笔记。）
EtherCAT Master Control System Based on STM32H743
An open-source, compact, and energy-efficient flashlight solution based on the CH32V003 RISC-V microcontroller and SGM3732 LED driver.
Flight-Controlller Designed By F4/F7 and so on
QR code generation library in C, optimized for low-power devices, such as Arduino.